PTN_V01 VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
www.vishay.com Vishay Dale Thin Film Revision: 13-Oct-16 1 Document Number: 60026 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Commercial Thin Film Chip Resistor, Surface Mount Chip These chip resistors are available in both “top side” and “wraparound” termination styles in a variety of sizes. They incorporate self passivated, enhanced Tantalum Nitride films, to give superior performance on moisture resistance, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating. This product will out-perform all requiremen ts of characteristic E of MIL-PRF-55342. CONSTRUCTION
FEATURES
- Moisture resistant
- High purity alumina substrate
- Non-standard values available
- Will pass +85 °C, 85 % re lative humidity and 10 % rated power
- 100 % visual inspected per MIL-PRF-55342
- N o n - i n d u c t i v e Very low noise and voltage coefficient (< -30 dB)
- Laser-trimmed tolerances to ± 0.05 %
- Wraparound resistance less than 10 m
- Epoxy bondable termination available
- Sulfur resistant (per ASTM B809-95 humid vapor test)
- Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. TYPICAL PERFORMANCE Notes (1) 0705 and 0805 are the same (only use 0805 when ordering) (2) Reference environmental tests table for short time overload test parameters. Actual Size 1505 Adhesion Layer High Purity Alumina Substrate Nickel Barrier Solder Coating Passivation T antalum Nitride Resistive Film ABSOLUTE TCR 10 TOL. 0.05 Available Available Available Available STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 1.0 to 3 M - TCR: Absolute ± 10 ppm/°C to ± 100 ppm/°C -55 °C to +125 °C Tolerance: Absolute ± 0.05 % to ± 5 % +25 °C Stability: Absolute R ± 0.03 % 2000 h at 70 °C Stability: Ratio -- Voltage Coefficient 0.1 ppm/V - Working Voltage 75 V to 200 V - Operating Temperature Range -55 °C to +155 °C - Storage Temperature Range -55 °C to +155 °C - Noise < -30 dB - Shelf Life Stability: Absolute -- COMPONENT RATINGS CASE SIZE (1) POWER RATING (mW) WORKING VO LTAGE (V) RESISTANCE RANGE ( ) 0402 50 75 1.5 to 51.1K 0502 100 75 1.5 to 65K 0505 150 75 10 to 130K 0603 150 75 1.5 to 130K 0705 200 100 1.0 to 310K 0805 200 100 1.0 to 310K 1005 250 100 1.5 to 360K 1010 500 150 1.0 to 600K 1206 400 200 1.5 to 1M 1505 400 150 1.25 to 1M 2208 750 150 2.0 to 1.75M 2010 800 200 1.0 to 2M 2512 (2) 2000 200 1.5 to 3M
www.vishay.com Vishay Dale Thin Film Revision: 13-Oct-16 2 Document Number: 60026 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) Note (1) 2512 short time overload test is based on 1 W power level below critical value of 20 k. DIMENSIONS in inches CASE SIZE L W T D E 0705, 0805 ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF-55342 Requirements) ENVIRONMENTAL TEST LIMITS MIL-PRF-55342 CHARACTERISTIC “E” TYPICAL VISHAY PERFORMANCE Resistance Temperature Characteristic ± 25 ppm/°C ± 15 ppm/°C Max. Ambient Temp. at Rated Wattage +70 °C +70 °C Max. Ambient Temp. at Power Derating +150 °C +150 °C Thermal Shock R ± 0.1 % ± 0.040 % Low Temperature Operation R ± 0.1 % ± 0.001 % Short Time Overload (1) R ± 0.10 % ± 0.002 % High Temperature Exposure R ± 0.1 % ± 0.04 % Resistance to Soldering Heat R ± 0.2 % ± 0.008 % Moisture Resistance R ± 0.2 % ± 0.004 % Life +70 °C at 1000 h R ± 0.50 % ± 0.02 % Insulation Resistance 10 000 minimum > 100 000 M D W L T E FILM LOAD LIFE STABILITY (at +125 °C) 0.1 % 0.06 % 0.05 % 0.04 % 0.03 % 0.02 % 0.01 % 0.006 % 0.005 % 0.004 % 0.003 % 0.002 % 0.001 % 1000 1200 1400 1600 1800 2000 Time in h at + 125 °C Maximum Absolute Change 800600400200 DERATING CURVE Ambient Temperature °C 01 5 5 100Percent of Rated Power 70 125
www.vishay.com Vishay Dale Thin Film Revision: 13-Oct-16 3 Document Number: 60026 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Not available below 50 . (2) Not available below 10 . (3) 1 k (4) Preferred packaging code. PULSE CURVE GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PTN1206E1002BBT1 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING PTN 0402 0502 0505 0603 0805 1005 1010 1206 1505 2208 2010 2512 D = ± 15 ppm/°C (1) E = ± 25 ppm/°C (2) H = ± 50 ppm/°C (2) K = ± 100 ppm/°C L = ± 200 ppm/°C Y = ± 10 ppm/°C (3) The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. Example: 10R0 = 10 1000 = 100 1001 = 1 k A = ± 0.05 % (2) B = ± 0.1 % D = ± 0.5 % F = ± 1 % G = ± 2 % J = ± 5 % B = wraparound Sn/Pb solder Sn63 w/nickel barrier G = wraparound Au over Ni (gold) termination epoxy bondable RoHS-compliant - e4 S = wraparound electroplated 100 % pure matte tin RoHS-compliant - e3 BS = BULK 100 min., 1 mult W0 = WAFFLE 100 min., 100 mult WS = WAFFLE 100 min., 1 mult WI = 100 min., 1 mult (item single lot date code) WP = 100 min., 1 mult (package unit single lot date code) TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (4) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min., 1 mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) Historical Part Number example: PTN0805H8801BBT (for reference purposes only) PTN 0805 H 8801 B B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING RESISTANCE TCR (ppm/°C) TOLERANCE (%) 10 to 3 M 25, 50, 100, 200 0.1, 0.5, 1, 2, 5 5 to 10 100, 200 1, 2, 5 1.0 to 5 200 1, 2, 5 0.1 100 1000 Peak Power (W) Pulse Duration (s) 10 Ω - 2512 100 Ω - 2512 10 Ω - 1206 100 Ω - 1206 10 Ω - 0805 100 Ω - 0805 10 Ω - 0603 100 Ω - 0603 06E1 02B 01 BT 1NPT 2
www.vishay.com Vishay Revision: 13-Jun-16 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.