PTL110S

PTL110S BANNER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Holding Registers for Device Information Address without Offset Address with Offset Description Holding Register Representation 1000 1001 Low word model number Example: 0x0002A734 (hex) = 173876 (dec) High word = 0x0002 Low word = 0xA7341001 1002 High word model number 1002 1003 Model version (BCD) 1003–1018 1004–1019 Model name, string 1019 1020 Low word configuration number Example: 0x00016D43 (hex) = 93507 (dec) High word = 0x0001 Low word = 0x6D431020 1021 High word configuration number 1021 1022 Configuration version (BCD) 1022–1037 1023–1038 Serial number/date code, string 1038–1053 1039–1054 Serial number, string Holding Registers for Outputs Use these registers to differentiate sensor outputs or turn them off. Address without Offset Address with Offset Description Holding Register Representation Default Value 6000 6001 Touch sensor output (if present) 0 = Disabled 1 = Primary 2 = Secondary 6001 6002 Touch sensor on delay (ms) 0–65535 0 6002 6003 Optical sensor output (if present) 0 = Disabled 1 = Primary 2 = Secondary 6003 6004 Optical sensor on delay (ms) 0–65535 0 Holding Registers to Configure Modbus Communication Address without Offset Address with Offset Description Holding Register Representation Default Value 6100 6101 Modbus physical slave ID of the device 1–247 1 6101 6102 Baud rate 12 = 1200 24 = 2400 48 = 4800 96 = 9600 192 = 19200 384 = 38400 192 6102 6103 Parity 0 = none 1 = odd 2 = even 6103 6104 Stop Bits 1 = 1 2 = 2 3 = 1.5 PTL110S Pick-to-Light Device Register Map Original Document 209995 Rev. C

12 June 2019

Holding Registers for Device-Specific Configuration Address without Offset Address with Offset Description Holding Register Representation Default Value 6200 6201 Indicator intensity, basic mode only 0 = Low 1 = Standard 2 = High 6201 6202 Device orientation (if display is present in the device) 0 = Standard (touch sensor/indicator located on the right) 1 = Inverted (touch sensor/indicator located on the left) 6202 6203 Touch sensor sensitivity (if touch sensor is present in the device) 0 = Low 1 = Standard 2 = High 6203 6204 Scrolling display settings (if display is present in the device) 0 = Off 1 = Enabled, slow speed 2 = Enabled, standard speed 3 = Enabled, high speed 6204 6205 Display startup message (if display is present in the device) 0 = None 1 = Show Modbus settings (slave ID, baud, data bits, parity bit, stop bit) 2 = Show custom message (6400-6409) 6205 6206 Custom startup message display time (ms) (if display is present in the device) 0 through 65535 (65535 value is infinite) 2000 6206 6207 First decimal place function (if display is present in the device) 0 = Off 1 = Steady on 2 = Flashing 3 = Communication 4 = Power+Communication 5 = Activation 6207 6208 Second decimal place function (if display is present in the device) 0 = Off 1 = Steady on 2 = Flashing 3 = Communication 4 = Power+Communication 5 = Activation 6208 6209 Third decimal place function (if display is present in the device) 0 = Off 1 = Steady on 2 = Flashing 3 = Communication 4 = Power+Communication 5 = Activation 6209 6210 Display encoding for register 8703 (if display is present in the device) 0 = ASCII 1 = Decimal Numeric 0 Holding Registers to Configure State Mode Refer to the Instruction Manual for a description of these settings. Address without Offset Address with Offset Description Holding Register Representation Default Value 6300 6301 Enable state mode 0 = Disabled 1 = Enabled 0 6301 6302 Waiting State: Animation 0 = Off 1 = Steady 2 = Flash 3 = Two Color Flash 4 = Half/Half Top/Bottom 5 = Half/Half Left/Right 6 = Half/Half Rotate 7 = Chase 8 = Intensity Sweep PTL110S Pick-to-Light Device Register Map 2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 209995 Rev. C

Offset Description Holding Register Representation Default Value 6302 6303 Waiting State: Color 1 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 6303 6304 Waiting State: Color 2 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 6304 6305 Waiting State: Intensity for color 1 0 = High 1 = Medium 2 = Low 3 = Off 6305 6306 Waiting State: Intensity for color 2 0 = High 1 = Medium 2 = Low 3 = Off 6306 6307 Waiting State: Animation speed 0 = Slow 1 = Standard 2 = Fast 6307 6308 Waiting State: Animation pattern 0 = Normal 1 = Strobe 2 = 3-Pulse 3 = SOS 4 = Random 6308 6309 Waiting State: Animation direction 0 = Clockwise 1 = Counterclockwise 0 6309 6310 Waiting State: Visual on delay (ms) 0–65535 0 6310 6311 Waiting State: Visual off delay (ms) 0–65535 0 6311 6312 Reserved - 6312 6313 Mispick State: Animation 0 = Off 1 = Steady 2 = Flash 3 = Two Color Flash 4 = Half/Half Top/Bottom 5 = Half/Half Left/Right 6 = Half/Half Rotate 7 = Chase 8 = Intensity Sweep PTL110S Pick-to-Light Device Register Map P/N 209995 Rev. C www.bannerengineering.com - Tel: + 1 888 373 6767 3

Offset Description Holding Register Representation Default Value 6313 6314 Mispick State: Color 1 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 6314 6315 Mispick State: Color 2 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 6315 6316 Mispick State: Intensity for color 1 0 = High 1 = Medium 2 = Low 3 = Off 6316 6317 Mispick State: Intensity for color 2 0 = High 1 = Medium 2 = Low 3 = Off 6317 6318 Mispick State: Animation speed 0 = Slow 1 = Standard 2 = Fast 6318 6319 Mispick State: Animation pattern 0 = Normal 1 = Strobe 2 = 3-Pulse 4 = SOS 5 = Random 6319 6320 Mispick State: Animation direction 0 = Clockwise 1 = Counterclockwise 0 6320 6321 Mispick State: Visual on delay (ms) 0–65535 0 6321 6322 Mispick State: Visual off delay (ms) 0–65535 3000 6322 6323 Reserved - 6323 6324 Job State: Animation 0 = Off 1 = Steady 2 = Flash 3 = Two Color Flash 4 = Half/Half Top/Bottom 5 = Half/Half Left/Right 6 = Half/Half Rotate 7 = Chase 8 = Intensity Sweep PTL110S Pick-to-Light Device Register Map 4 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 209995 Rev. C

Offset Description Holding Register Representation Default Value 6324 6325 Job State: Color 1 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 6325 6326 Job State: Color 2 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 6326 6327 Job State: Intensity for color 1 0 = High 1 = Medium 2 = Low 3 = Off 6327 6328 Job State: Intensity for color 2 0 = High 1 = Medium 2 = Low 3 = Off 6328 6329 Job State: Animation speed 0 = Slow 1 = Standard 2 = Fast 6329 6330 Job State: Animation pattern 0 = Normal 1 = Strobe 2 = 3-Pulse 3 = SOS 4 = Random 6330 6331 Job State: Animation direction 0 = Clockwise 1 = Counterclockwise 0 6331 6332 Job State: Visual on delay (ms) 0–65535 0 6332 6333 Job State: Visual off delay (ms) 0–65535 0 6333 6334 Reserved - 6334 6335 Acknowledge State: Animation 0 = Off 1 = Steady 2 = Flash 3 = Two Color Flash 4 = Half/Half Top/Bottom 5 = Half/Half Left/Right 6 = Half/Half Rotate 7 = Chase 8 = Intensity Sweep PTL110S Pick-to-Light Device Register Map P/N 209995 Rev. C www.bannerengineering.com - Tel: + 1 888 373 6767 5

Offset Description Holding Register Representation Default Value 6335 6336 Acknowledge State: Color 1 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 6336 6337 Acknowledge State: Color 2 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 6337 6338 Acknowledge State: Intensity for color 1 0 = High 1 = Medium 2 = Low 3 = Off 6338 6339 Acknowledge State: Intensity for color 2 0 = High 1 = Medium 2 = Low 3 = Off 6339 6340 Acknowledge State: Animation speed 0 = Slow 1 = Standard 2 = Fast 6340 6341 Acknowledge State: Animation pattern 0 = Normal 1 = Strobe 2 = 3-Pulse 3 = SOS 4 = Random 6341 6342 Acknowledge State: Animation direction 0 = Clockwise 1 = Counterclockwise 0 6342 6343 Acknowledge State: Visual on delay (ms) 0–65535 0 6343 6344 Acknowledge State: Visual off delay (ms) 0–65535 1000 6344 6345 Reserved - 6345 6346 Secondary Acknowledge State: Animation 0 = Off 1 = Steady 2 = Flash 3 = Two Color Flash 4 = Half/Half Top/Bottom 5 = Half/Half Left/Right 6 = Half/Half Rotate 7 = Chase 8 = Intensity Sweep PTL110S Pick-to-Light Device Register Map 6 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 209995 Rev. C

Offset Description Holding Register Representation Default Value 6346 6347 Secondary Acknowledge State: Color 1 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 6347 6348 Secondary Acknowledge State: Color 2 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 6348 6349 Secondary Acknowledge State: Intensity for color 1 0 = High 1 = Medium 2 = Low 3 = Off 6349 6350 Secondary Acknowledge State: Intensity for color 2 0 = High 1 = Medium 2 = Low 3 = Off 6350 6351 Secondary Acknowledge State: Animation speed 0 = Slow 1 = Standard 2 = Fast 6351 6352 Secondary Acknowledge State: Animation pattern 0 = Normal 1 = Strobe 2 = 3-Pulse 3 = SOS 4 = Random 6352 6353 Secondary Acknowledge State: Animation direction 0 = Clockwise 1 = Counterclockwise 0 6353 6354 Secondary Acknowledge State: Visual on delay (ms) 0–65535 0 6354 6355 Secondary Acknowledge State: Visual off delay (ms) 0–65535 1000 6355 6356 Reserved - Holding Registers to Define a Custom Startup Message Address without Offset Address with Offset Description Holding Register Representation Default Value 6400–6409 6401–6410 Custom display startup message (if display is present in the device) Holding Registers for Test Mode Address without Offset Address with Offset Description Holding Register Representation Default Value 6500 6501 Enable test mode Indicator will flash blue and display will show slave ID 0 = Off 1 = Enabled 0 PTL110S Pick-to-Light Device Register Map P/N 209995 Rev. C www.bannerengineering.com - Tel: + 1 888 373 6767 7

Holding Registers to Restore Factory Defaults Address without Offset Address with Offset Description Holding Register Representation Default Value 6600 6601 Restore factory defaults. Set 6601 and 6602 to the correct key to initiate the selected factory reset type (hard or soft). 0 = Disabled 1 = Enable a hard reset (restore all defaults) 2 = Enable a soft reset (restore all defaults except the Modbus communication settings in registers 6100-6103) 6601 6602 Restore factory defaults key 1 43690 = Enable 0 6602 6603 Restore factory defaults key 2 21845 = Enable 0 Holding Registers When Common ID is Active Address without Offset Address with Offset Description Holding Register Representation Default Value 7940 7941 Modbus slave ID of active device, same as register 6100 7941 7942 Device output latch register; values in this register will latch until acknowledged and cleared by the master (either by changing the value in this register or in register 8700) OR will clear after the timeout elapses as defined in register 8812 0 = None triggered 1 = Primary triggered 2 = Secondary triggered 3 = Both triggered 7942 7943 Device output status; values in this register will reflect the real time status of the device's outputs 0 = None triggered 1 = Primary triggered 2 = Secondary triggered 3 = Both triggered Main Holding Registers Used in Runtime Address without Offset Address with Offset Description Holding Register Representation Default Value 8700 8701 Device Job state, used in State Mode to designate a device as active (moves devices from Waiting State to Job State and vice versa) Any write to this register resets the device latch in Register 7941 0 = Waiting State 1–65535 = Job State 0 8701 8702 Job animation Primary enumeration is active when device is in Basic Mode, value in register 6300 is 0 Secondary enumeration is active when device is in State Mode, value in register 6300 is 1. This value will then override the value in register 6323 Primary Enumeration: 0 = Off 1 = Steady 2 = Flash 3 = Strobe 11–20 N-Pulse (N = Index - 10) (e.g. 13 = 3 Pulse) 0Secondary Enumeration: 0 = Off 1 = Steady 2 = Flash 3 = Two Color Flash 4 = Half/Half Top/Bottom 5 = Half/Half Left/Right 6 = Half/Half Rotate 7 = Chase 8 = Intensity Sweep PTL110S Pick-to-Light Device Register Map 8 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 209995 Rev. C

Offset Description Holding Register Representation Default Value 8702 8703 Job color Primary enumeration is active when device is in Basic Mode, value in register 6300 is 0 Secondary enumeration is active when device is in State Mode, value in register 6300 is 1. This value will then override the value in register 6324. Primary Enumeration: 0 = Off 1 = Red 2 = Green 3 = Yellow 4 = Blue 5 = Magenta 6 = Cyan 7 = White 8 = Amber 9 = Rose 10 = Lime Green 11 = Orange 12 = Sky Blue 13 = Violet 14 = Spring Green 0 Secondary Enumeration: 0 = Red 1 = Green 2 = Yellow 3 = Blue 4 = Magenta 5 = Cyan 6 = White 7 = Amber 8 = Rose 9 = Lime Green 10 = Orange 11 = Sky Blue 12 = Violet 13 = Spring Green 8703–8752 8704–8753 Characters for the display Primary enumeration: null terminated ASCII string or numeric representation (defined in register 6209), each register holds 2 characters (i.e. 8703 holds values for characters 1 and 2 and 8752 holds values for characters 99 and 100 in the string) Secondary enumeration: decimal encoded, decimal value in the register will show on the display Primary Enumeration: ASCII encoded 65535 = Blank display Secondary Enumeration: Decimal encoded 0–65534 = decimal shown on the display 65535 = Blank Common ID Configuration Holding Registers Address without Offset Address with Offset Description Holding Register Representation Default Value 8810 8811 Common ID 1–247 195 8811 8812 Global on delay that applies to both inputs (touch and optical sensor) (stacks on top of on delays in registers 6001 and 6003) (ms) 0–65535 (65535 value is infinite) 0 8812 8813 Latch timeout for 7941 (ms) 0–65535 (65535 value is infinite) 1000 8813 8814 Minimum output on time for register 7942, off delay (ms) 0–65535 (65535 value is infinite) 1000 Input Registers Address Description Input Register Representation Default Value

300 CPU Temperature C

301 Board Temperature C

2000 Modbus Bus Message Count

2001 Modbus Bus Comm Error Count

2002 Modbus Bus Exception Error Count

2003 Mobus Server Message Count

2004 Modbus Server NACK Count

2005 Modbus Bus Character Overrun Count

2006 Modbus Bus Overrun Count

PTL110S Pick-to-Light Device Register Map P/N 209995 Rev. C www.bannerengineering.com - Tel: + 1 888 373 6767 9

Address Description Input Register Representation Default Value

2007 Modbus Noise Error

2008 Modbus Parity Error

2009 Modbus Frame Error

2010 Modbus Crc Error

2011 Modbus Illegal Function

2012 Modbus Illegal Data Address

2013 Modbus Illegal Data Value

2014 Modbus Device Failure

PTL110S Pick-to-Light Device Register Map © Banner Engineering Corp. All rights reserved