PTK15-Q24-S3-T CUI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • U-frame with screw terminals
  • Industry standard pin out
  • Wide 4:1 input range
  • Fully isolated
  • Output voltage trimmable
  • Output on/off control
  • Over-current protection
  • Over-voltage protection
  • Six-sided EMI shielding
  • Constant switching frequency
  • High efficiency
  • Compact size 2.25”x3.0”x0.67”
  • -40°C~85°C Models available
  • 3 year warranty MODEL 1 Output Input Output Output Ripple & Noise 2 Efficiency Power Voltage Voltage Current mV P-P (Typ.) (max) (max) PTK15-Q24-S3-T 13.2W 10-36VDC 3.3VDC 4.0A 75 80% PTK15-Q24-S5-T 15.0W 10-36VDC 5VDC 3.0A 75 85% PTK15-Q24-S12-T 15.0W 10-36VDC 12VDC 1.25A 120 86% PTK15-Q24-S15-T 15.0W 10-36VDC 15VDC 1.0A 150 84% PTK15-Q24-D5-T 15.0W 10-36VDC ±5VDC 1.5A 50/50 85% PTK15-Q24-D12-T 15.0W 10-36VDC ±12VDC 0.625A 120/120 87% PTK15-Q24-D15-T 15.0W 10-36VDC ±15VDC 0.5A 150/150 87% PTK15-Q48-S3-T 13.2W 20-72VDC 3.3VDC 4.0A 75 80% PTK15-Q48-S5-T 15.0W 20-72VDC 5VDC 3.0A 75 85% PTK15-Q48-S12-T 15.0W 20-72VDC 12VDC 1.25A 120 87% PTK15-Q48-S15-T 15.0W 20-72VDC 15VDC 1.0A 150 87% PTK15-Q48-D5-T 15.0W 20-72VDC ±5VDC 1.5A 50/50 85% PTK15-Q48-D12-T 15.0W 20-72VDC ±12VDC 0.625A 120/120 86% PTK15-Q48-D15-T 15.0W 20-72VDC ±15VDC 0.5A 150/150 87% Note: 1 All models are also available in an extended temperature range of -40°C~85°C. For these models, append “M” to the model number, e.g. PTK15-Q48-S5M. 2 Ripple & noise measured with a 20MHz bandwidth, off a 10 μF electrolytic and a 0.1 μF ceramic cap in parallel at ouptut. Discontinued For more information, please visit the product page.

rev. page date DESCRIPTION: screw terminal dc-dc converter 2 of 3 SERIES: PTK15-T GENERAL Parameter Continuous/Description Min Nom Max Units Efficiency Typical at full load 78% 83% Dielectric withstand Input/case, input/output, output/case 500 VAC Insulation resistance at 500 VDC 100M Ohms Agency standards Approved to UL60950, CSA C22.2 No. 60950, TUV EN60950 Case material Zn Material flammability 94 V-0 Weight 80 grams (2.82) (ounces) MTBF MIL-HDBK-217F 470k hours Operating temperature Regular models - see derating curve. -20 +71 °C Extended temperature models -40 +85 °C Storage temperature -40 +105 °C Humidity Operating(non-condensing) 5% 95% RH PROTECTION Parameter Conditions/Description Min Nom Max Units Over-current Continuous auto recovery 5 105% 135% Over-voltage Internally zener clamped 5 110% 140% Note: 5 Continuous operation in a protected state may compromise long-term reliability. OUTPUT Parameter Conditions/Description Min Nom Max Units Output trim range With external trim resistors -5% +5% Set point accuracy Single output -2% +2% Dual output -3% +3% Line regulation Single output models -0.25% +0.25% (Low line to high line) Dual output models -2.5% +2.5% Triple: main output (Vout) -0.25% +0.25% auxillary outputs (+Vaux / -Vaux) -5% +5% Load regulation² Single output models - no load to full load -0.25% +0.25% Dual output models - balanced loads -2.5% +2.5% Triple: main output (Vout) -0.25% +0.25% auxillary outputs(+Vaux / -Vaux) - with 10% load -5% +5% on Vout and balanced loads on +Vaux and -Vaux Minimum load Converters will not be damaged if loading conditions are less than minimum specified loads, but regulation specs may not be met 4 Ripple and noise See chart Note: 4 Single output: no min. load required, Dual output: 10%, Triple output: balanced load Input Parameter Conditions/Description Min Nom Max Units Input voltage range 10 24 36 VDC 20 48 72 VDC Remote on/off control Output turn-on 3 2.5V (open) 5.5V Output turn-off 0V (short) 0.8V Switching frequency Constant 250 KHz Note: 3 Output defaults to “on” when there is no connection to the “CNT” pin. Discontinued For more information, please visit the product page.

rev. page date DESCRIPTION: screw terminal dc-dc converter 3 of 3 SERIES: PTK15-T V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer's applications using V-Infinity products other than repair or replacing (at V-I's option) V- Infinity products not meeting V-I's published specifications. Nothing will be covered outside of standard product warranty. Dual OutputSingle Output *DIN rail mounting kit available (part# STK-DIN) Discontinued For more information, please visit the product page.