PTK10 CUI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

rev. page date rev. page date DESCRIPTION: DC/DC converter 1 of 3 PART NUMBER: PTK10 series

features

  • industry standard pin out
  • wide 4:1 input range
  • fully isolated
  • over-current protection
  • over-voltage protection
  • six-sided EMI shielding
  • constant switching frequency
  • high efficiency
  • compact size 2.0”x1.0”x0.4”
  • 3 year warranty model 1 output input output output ripple & noise 2 efficiency number power voltage voltage current mV P-P (typ.) (max) (max) PTK10-Q24-S3 7.92W 10-36VDC 3.3VDC 2.4A 75 79% PTK10-Q24-S5 10.0W 10-36VDC 5VDC 2.0A 75 82% PTK10-Q24-S12 10.8W 10-36VDC 12VDC 0.9A 120 83% PTK10-Q24-S15 10.5W 10-36VDC 15VDC 0.7A 150 84% PTK10-Q24-D5 10.0W 10-36VDC ±5VDC 1.0A/1.0A 100/100 80% PTK10-Q24-D5A 10.0W 10-36VDC ±5VDC 1.5A/0.5A 100/100 78% PTK10-Q24-D12 10.8W 10-36VDC ±12VDC 0.45A 120/120 83% PTK10-Q24-D15 10.5W 10-36VDC ±15VDC 0.35A 150/150 83% PTK10-Q48-S3 7.92W 20-72VDC 3.3VDC 2.4A 75 78% PTK10-Q48-S5 10.0W 20-72VDC 5VDC 2.0A 75 81% PTK10-Q48-S12 10.8W 20-72VDC 12VDC 0.9A 120 84% PTK10-Q48-S15 10.5W 20-72VDC 15VDC 0.7A 150 85% PTK10-Q48-D5 10.0W 20-72VDC ±5VDC 1.0A/1.0A 100/100 81% PTK10-Q48-D5A 10.0W 20-72VDC ±5VDC 1.5A/0.5A 100/100 81% PTK10-Q48-D12 10.8W 20-72VDC ±12VDC 0.45A 120/120 83% PTK10-Q48-D15 10.5W 20-72VDC ±15VDC 0.35A 150/150 83% NOTE: 1. All models are also available in an extended temperature range of -40°C~85°C. For these models, append “M” to the model number, e.g. PTK10-Q48-S5M. 2. Ripple & noise measured with a 20MHz bandwidth, off a 10uF electrolytic and a 0.1uF ceramic cap in parallel at the ouptut. DERATING CURVES

rev. page date DESCRIPTION: DC/DC converter 2 of 3 PART NUMBER: PTK10 series INPUT parameter conditions/description min nom max units input voltage range 10 24 36 VDC 20 48 72 VDC switching frequency constant 300 KHz OUTPUT parameter conditions/description min nom max units set point accuracy single output -2% +2% dual output -3% +3% line regulation single output models -0.5% +0.5% (low line to high line) dual output models -1.0% +1.0% load regulation single output models - no load to full load -1.0% +1.0% dual output models - balanced loads (10% min. load) -2.5% +2.5% minimum load converters will not be damaged if loading conditions are less than minimum specified loads, but regulation specs may not be met 3 ripple and noise see chart NOTE: 3 single output: no min. load required, dual: 10% PROTECTION parameter conditions/description min nom max units over-current continuous auto recovery 4 105% 135% over-voltage internally zener clamped 4 110% 140% NOTE: 4 continuous operation in a protected state may compromise long-term reliability. GENERAL parameter conditions/description min nom max units efficiency typical at full load 77% 83% dielectric withstand input/case, input/output, output/case 500 VAC insulation resistance at 500 VDC 100M Ohms agency standards approved to UL60950(E222889), CSA C22.2 No. 60950, TUV EN60950; (single output only) case material Zn material flammability 94 V-0 weight 40 grams (1.41) (ounces) MTBF MIL-HDBK-217F 580k hours operating temperature regular models - see derating curve. -20 +71 °C extended temperature models -40 +85 °C storage temperature -40 +105 °C humidity operating (non-condensing) 5% 95% RH washability not intended for aqueous wash

rev. page date DESCRIPTION: DC/DC converter 3 of 3 PART NUMBER: PTK10 series DIMENSIONS (mm)