PTH12030

PTH12030 ADVANCEDENERGY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

©2021 Advanced Energy Industries, Inc. ARTESYN PTH12030

12 Vin Single Output

Total Power:

143 Watts

# of Outputs: Single DATA SHEETAdvanced Energy's Artesyn PTH12030 series of non-isolated DC-DC converters complies with the Point-of-Load Alliance (POLA) standard. The converters offer some of the most advanced POL functions in the industry, including Auto-Track™ sequencing for controlled power-up/power-down of complex semiconductor devices such as DSPs, FPGAs and ASICs, and voltage margining. Standard features include pre-bias startup, input undervoltage lockout, remote sense, remote On/Off and auto resetting short-circuit protection. There are two models in the PTH12030 series of converters, both of which have an input voltage range of 10.8 to 13.2 Vdc. One model offers an output voltage that can be trimmed from 0.8 to 1.8 Vdc, the other has an output that can be trimmed from 1.2 to 5.5 Vdc, enabling a broad diversity of semiconductor power needs to be satisfied. The 0.8 to 1.8 V output converter offers up to 89% efficiency while the higher output voltage model can achieve up to 94.5%. Both converters are rated at 143 watts output power and can deliver up to 26 amps. Available in through-hole horizontal mount and surface-mount versions, they have a small 1.1 x 1.37 inch (28.4 x 34.8 mm) footprint and an installed height of just 0.35 inch (9 mm). SPECIAL FEATURES  26 A output current  12 V input voltage  Wide-output voltage adjust: 1.2 - 5.5 Vdc for suffix ‘W’ 0.8 - 1.8 Vdc for suffix ‘L’  Auto-track™ sequencing*  Margin up/down controls  Efficiencies up to 94.5%  Output ON/OFF inhibit  Output voltage sense  Point-of-Load-Alliance (POLA) compatible  RoHS compliant  Two year warranty * Auto-track is a trademark of Texas Instruments. SAFETY  UL/cUL CAN/CSA-C22.2 No. 60950- 1-03/UL 60950-1, File No. E174104  TÜV Product Service (EN60950) Certificate No B 04 06 38572 044  CB Report and Certificate to IEC60950, Certificate No. US/8292/UL

2 advancedenergy.com PTH12030 ELECTRICAL SPECIFICATIONS Input Input voltage ra nge (See Note 3) 10.2 - 13.2 Vdc Input current No load 10 mA typical Remote ON/OFF (See Note 1) Positive logic Start-up time 1 V/ms Undervoltage lockout 8.5 - 9.5 V typical Track input voltage Pin 11 (See Notes 6 ) ±0.3 Vin Efficiency See Efficiency Table Insulation voltage Non-isolated Switching frequency Over Vin and Io ranges 575 kHz typ Approvals and standards EN60950, UL/cUL60950 Material flammability UL94V-0 Dimensions L x W x H 34.80 x 28.45 x 9.00 mm 1.370 x 1.120 x 0.354 in Weight 7 g (0.25 oz) MTBF Telcordia SR-332 2,821,000 hours Output Voltage adjustability (See Note 4) 1.2 - 5.5 Vdc (Suffix ‘W’) 0.8 - 1.8 Vdc (Suffix ‘L’) Setpoint accuracy ±2.0% Vo Line regulation ±5 mV typical Load regulation ±5 mV typical Total regulation ±3.0% Vo Minimum load 0 A Ripple and noise 20 MHz bandwidth (See Note 8) 25 mV pk-pk (Suffix ‘W’) 15 mV pk-pk (Suffix ‘L’) Temperature co-efficient -40 °C to +85 °C ±0.5% Vo Transient response (See Note 5) 50 μs recovery time Overshoot/undershoot 150 mV Margin adjustment ±5.0% Vo All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. Cin = 560 μF, Cout = 0 μF. GENERAL SPECIFICATIONS

advancedenergy.com 3 PTH12030 Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 Thermal performance (See Note 2) Operating ambient temperature Non-operating temperature -40 °C to +85 °C -40 °C to +125 °C MSL (‘Z’ suffix only) JEDEC J-STD-020C Level 3 Protection Short-circuit Auto reset 40 A typical Thermal Auto recovery Model Number (9) Output Power (Max.) Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load PTH12030L 143 W 10.8 - 13.2 Vdc 0.8 - 1.8 Vdc 0 A 26 A 89% ±5 mV ±5 mV EMC CHARACTERISTICS ENVIRONMENTAL SPECIFICATIONS

ORDERING INFORMATION

PART NUMBER SYSTEM WITH OPTIONS Product Family Input Voltage Output Current Mechanical Package Output Voltage Code Pin Option (8) Mounting Options Pin Option PTH 12 03 0 W A S T Point-of-Load Alliance compatible 12 = 12 V 03 = 26 A Always 0 W = Wide L = Low Voltage D = Horizontal through-hole (RoHS 6/6) Z = Surface-mount solder ball (RoHS 6/6) No Suffix = Trays T = Tape and Reel (8)

4 advancedenergy.com PTH12030 OUTPUT VOLTAGE ADJUSTMENT The ultra-wide output voltage trim range offers major advantages to users who select the PTH12030. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’. When the PTH12030 converter leaves the factory the output has been adjusted to the default voltage of 1.2 V for the PTH12030W and 0.8 V for the PTH12030L. Efficiency Table: PTH12030W (Io = 18 A) Output Voltage Efficiency Vo = 5.0 V 94.5% Vo = 3.3 V 92.7% Vo = 2.5 V 91.4% Vo = 2.0 V 90.3% Vo = 1.8 V 89.5% Vo = 1.5 V 88.2% Vo = 1.2 V 86.2% Efficiency Table: PTH12030L (Io = 18 A) Output Voltage Efficiency Vo = 1.8 V 89% Vo = 1.5 V 87% Vo = 1.2 V 85% Vo = 1.0 V 83% Vo = 0.8 V 80% Notes: 1. Remote ON/OFF. Positive Logic ON: Pin 4 open; or V > Vin - 0.5 V OFF: Pin 4 GND; or V < 0.8 V (min - 0.2 V). 2. See Figure 1 for safe operating curve of the PTH12030W and Figure 4 for safe operating curve of the PTH12030L. 3. A 560 μF electrolytic input capacitor is required for proper operation. The capacitor must be rated for a minimum of 800 mA rms of ripple current. 4. An external output capacitor is not required for basic operation. Adding 330 μF of distributed capacitance at the load will improve the transient response. 5. 1 A/μs load step, 50 to 100% Iomax, Cout = 330 μF. 6. If utilized Vout will track applied voltage by ±0.3 V (up to Vo set point). 7. Tape and reel packaging only available on the surface-mount versions. 8. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com to find a suitable alternative.

advancedenergy.com 5 PTH12030 Figure 2 - Efficiency vs Load Current Vin = 12 V (See Note B) Figure 1 - Safe Operating Area Vin = 12 V, Output Voltage = 3.3 V (See Note A) Figure 4 - Efficiency vs Load Current Vin = 12 V (See Note B) Figure 3 - Safe Operating Area Vin = 12 V, Output Voltage ≤ 1.8 V (See Note A) Figure 5 - Standard Application - All Models 0 4 8 12 Nat Conv

100 LFM

200 LFM

400 LFM

TEMPERATURE (ºC) OUTPUT CURRENT (A) EFFICIENC Y (%) OUTPUT CURRENT (A) 1.2V 1.8V 2.5V 3.3V 5.0V Vout 0 4 8 16 100 2012 24 111213 PTH12030 (Top View) 654 Track Margin Up Margin Down Vin GND Inhibit Cin 560F (Required) RSET 0.5%, 0.1W (Required) L O A D Vout Vo Sense Cout 330F (Optional) GND 0 5 10 Nat conv TEMPERATURE (ºC) OUTPUT CURRENT (A) EFFICIENCY (%) OUTPUT CURRENT (A) 1.8V 1.5V 1.2V 1.0V 0.8V 100 0 5 10 15 20 25 Vout PTH12030W CHARACTERISTIC DATA PTH12030L CHARACTERISTIC DATA Notes: A. SOA curves represent the conditions at which internal components are within the Artesyn derating guidelines. B. Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. Figure 2 - Efficiency vs Load Current Vin = 12 V (See Note B) Figure 1 - Safe Operating Area Vin = 12 V, Output Voltage = 3.3 V (See Note A) Figure 4 - Efficiency vs Load Current Vin = 12 V (See Note B) Figure 3 - Safe Operating Area Vin = 12 V, Output Voltage ≤ 1.8 V (See Note A) Figure 5 - Standard Application - All Models 0 4 8 12 Nat Conv TEMPERATURE (ºC) OUTPUT CURRENT (A) EFFICIENC Y (%) OUTPUT CURRENT (A) 1.2V 1.8V 2.5V 3.3V 5.0V Vout 0 4 8 16 100 2012 24 111213 PTH12030 (Top View) 654 Track Margin Up Margin Down Vin GND Inhibit Cin 560F (Required) RSET 0.5%, 0.1W (Required) L O A D Vout Vo Sense Cout 330F (Optional) GND 0 5 10 Nat conv TEMPERATURE (ºC) OUTPUT CURRENT (A) EFFICIENCY (%) OUTPUT CURRENT (A) 1.8V 1.5V 1.2V 1.0V 0.8V 100 0 5 10 15 20 25 Vout

6 advancedenergy.com PTH12030 Plated through-hole Surface-mount MECHANICAL DRAWINGS Pin Assignments Pin Function

1 Ground

2 Vin

3 Ground

4 Inhibit*

5 Vo adjust

6 Vo sense

7 Ground

8 Vout

9 Vout

10 Ground

11 Track

12 Margin down*

13 Margin up*

*Denotes negative logic: Open = Normal operation Ground = Function active 0.140 (3.55) max. 0.354 (9.00) Host BoardTOP VIEW SIDE VIEW 1.370 (34.80) 1.12 0 654 1213 11 ø0.040 (1.02 )

13 Places

(28.45) 0.125 (3.18) 0.500 0.500 (12.70) (12.70) 0.125 (3.18) (1.52 ) 0.060 (1.52 ) 0.060 (9.52 ) 0.375 (3.18)0.12 5 (12.70) 0.500 (9.52 ) 0.375 (9.52 ) 0.375 0.125 (3.18) Dimensions in Inches (mm) Tolerances (unless otherwise speci/f_ied) 2 Places 0.030 (0.76) 3 Places 0.010 (0.25) (0.070 (1.78) (Standoff Shoulder) Lowest Component 0.010 min. (0.25) Bottom side Cl earance TOP VIEW SIDE VIEW 1.370 (34.80) 1.120 654 1213 11 (28.45) 0.125 (3.18) (12.70) 0.500 0.125 (3.18) 0.500 (12.70) 0.060 (1.52) 0.060 (1.52) 0.125 (3.18) 0.375 (9.52) 0.500 (12.70) (9.52) 0.375 0.375 (9.52) 0.125 (3.18) Dimensions in Inches (mm) Tolerances (unless otherwise speci/f_ied) 2 Places 0.030 (0.76) 3 Places 0.010 (0.25) 0.354 (9.00) max.* *A fter solder reflow on customer boar d Solder Ball ø0.040 (1.02)

ENG-PTH12030-235-01 1.13 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.