E2C-AM4A OMRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 31

Technical content

Products Related to Common Sockets and DIN Tracks A Wide Variety of Square and Round Sockets in Front-mounting and Back-mounting Models

  • Models available with finger protection.
  • Hold-down Clips and Socket Bridges for PYF Sockets are also available.
  • New screwless models available. Models Used with Common Sockets Sockets Item Model Num- ber of pins Applicable Sockets Group name Front-mount- ing Back- mount- ing Proximi- ty Sen- sors E2C E2C-AM4A 8 P2CF-08 P3G E2C-AK4A 11 P2CF-11 P3GA E2C-GE4A E2C-GF4A 8 PYF08A PY Level Devices 61F 61F-GP-N8 61F-APN2 PF083A PL 61F-UHS 8PFA1 61F-HSL 8PFA 61F-03B, -04B 61F-GP-N 61F-GPN-V50 61F-GPN-BT/BC

11 PF113A

61F-G1P, -G2P 14 14PFA K7L K7L-AT50/AT50D K7L-U/-UD 8 P2RF-08(-E) --- General- purpose Relays and Solid- state Re- lays MY (Q, K, H) MY1, MY2 8 PYF PY MY3 11 MY4, MYQ4 MY4Z-CBG MY2K, MY4H LY LY1, LY2 8 PTF PTLY3 11 LY4 G7K G7K-412S --- G2A(K) G2A, G2A-434 G2AK

14 PYF PY

MK(K) MK2P 8 PF083A(-E) PLMK3P MK2KP 11 PF113A(-E) Item Model Number of pins Applicable Sockets Group name Front- mounting Back- mounting General- purpose Relays and Solid-state Relays MM MM2(X)P 8 8PFA PL MM3P MM2(X)KP 11 PFAMM3XP MM3(X)KP MM4(X)P MM4(X)KP G4Q --- 8 8PFA1 PL G3F G3F(D) Series G3FM PYF PY G3H G3H(D) Series PTF PT G3B G3B(D) Series PF083A PL G9H G9H-2@@SP TF P T G2R G2R-1-S@ 5 P2RF-05@ P2R -05@ G2R-2-S@ 8 P2RF-08@ P2R -08@ G3R --- 5 P2RF-05@ P2R -05@ G7T G3TA G7T G3TA 5 P7TF-05 --- G7S G7S-4A2B-E G7S-3A3B-E 14 P7S-14F-END P7S -14P-E G7SA G7SA-3A1B G7SA-2A2B 10 P7SA-10F P7SA-10F-ND P7SA @-10P G7SA-5A1B G7SA-4A2B G7SA-3A3B P7SA-14F P7SA-14F-ND P7SA @-14P Timers H3CA H3CA-8(H) 8 P2CF P3G PL H3CA-A 11 P3GA PL H5CN H5CN-@M1 1 P 3GA Other H5CN models 8P 3G H5CX H5CX-L8@ 8P 3G H5CX-A11@ 11 P3GA H5CZ H5CZ-L8@ 8P 3G

Products Related to Common Sockets and DIN Tracks Hold-down Clips For Square Sockets Note: The @ in the model number is replaced with 08, 11, or 14. * If you use a Hold-down Clip with the MY2I, you cannot use the PYF08A. Use the PYF14A. For Round Sockets Note: 1. The 8PFA(1), 11PFA, and 14PFA are held with hooks. 2. The PL15, PL20, and PF202, as well as models not given in the above table, require panel processing for installation. 3. The PF085A Hold-down Clip is included with the H3M and H2A. It is an option (sold separately) for the H2C. Item Model Num- ber of pins Applicable Sockets Group name Front-mount- ing Back- mount- ing Timers H3CR H3CR-A8@ H3CR-F8@ H3CR-G8@ H3CR-H8@ P2CF P3G PL H3CR-A H3CR-AS H3CR-AP H3CR-F H3CR-FN H3CR-HRL

11 P3GA

H3YN-2@ 8 H3YN-4@ 14 H3RN H3RN-1@ 5 P2RF-@-E P2R @-@7PH3RN-2@ 8 RD2P --- 8 8PFA1 PL H2C --- 8 P2CF PF085A P3G PL Counters H7CX H7CX-A11@ 11 P2CF P3GA H7CZ H7CZ-L8@ 8P 3G H7CN H7CN-@M1 1 P 3GA Other H7CN models 8P 3G Tem- pera- ture Control- lers E5CC E5CC-@U1 1 P 3 G A E5C2 --- 8 P3G E5CS E5CS-@1, @21 1 P 3 G A Other E5CS models 8P 3G E5L --- 14 PTF14A --- Signal Con- verters K3FK K3FK models not listed below 8 8PFA (Included with Converter) ---K3FK-G@ K3FK-GS@ K3FK-SL-?5-@ 11PFA (Included with Converter) Compo- nent Protec- tive Compo- nents SE SE-KP@N 8PFA1 --- SAO SAO-@ APR APR-S PF083A PL08 APR-S380/-S440 11 P2CF-11 PL11 K2CU K2CU-P 8 8PFA1 --- SDV SDV-F@@/-FH@T PL08 SDV-D@@ 14 14PFA PL15 LG2 LG2-@ 8 PF083A PL08 K6EL K6EL-@ 11 P2CF-11 PL11 and P3GA-11 Prod- ucts for High- voltage Power Receiv- ing Equip- ment AGF AGF-1-P5 8 8PFA1 --- Annun- ciators MYA MYA-NA1, -NB1 8 PF083A PL MYA-NA2, -NB2 MYA-LA1, -LB1 MYA-LA2, -LB2 MYA-LA12, -LB12 Sockets PYF@A PTF@A PYF08M PY@(QN) PT@(QN) PY@-02 PT@-0Applicable models MY@, MY@N, MY@-D, MY2@-CR, MY4@-CR, MY4Z@-CR, MY@-TU, MY2K, MY@N-D2, LY@, LY@N, LY@-TU, MYQ@, G3H(D) Series, G3F(D) Series, G3FM, and G9H PYC-A1 PYC PYC-P PYC-P PYC-S PYC-P MY@I * LY@I --- PYC-P2 MY4H --- PYC-P MY2Z@-CR MY3@-CR LY@-CR Y92H-3 --- PYC-1 G2A(K) Series PYC-A2 --- PYC-2 PYC-3 PYC-5 PYC-3 PYC-5 G7K PKC --- H3Y Y92H-3 --- Y92H-4 Sockets PF083A PF113A PL08 (-Q) PL11 (-Q) PLE08-0 PLE11-0 P2CF-11 Applicable models 61F-03B, -04B PFC-A1 PLC PLC-10 --- 61F-GP-N, -GPN-BT 61F-GP-N8 ?61F-APN2 PFC-N8 PHC-5 MK2P Series, MK2KP, MK3P@(-US), and G3B(D) Series PFC-A1 PLC MK3ZP MK3LP PLC-1 MYA-NA1, -NB1 MYA-LA1, -LB1 MYA-NA2, -NB2 MYA-LA2, -LB2 PFC-A6 PLC-7 --- --- MYA-LA12, -LB12 PFC-A7 PLC-8 --- --- APR-S PFC-A6 PLC-7 --- --- LG2 PFC-A7 PLC-8 --- ---

Products Related to Common Sockets and DIN Tracks

Ordering Information

Note: 1. The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. 2. To remove the Relay, pull the lever on the Socket with your fingers supporting the lever and the opposite side of the Relay case, and jiggle the Relay. * Use a #1 Phillips screwdriver to tighten the screws on this Socket. Minimum Order Lot The following models are available at the minimum order lot specified below. Model P2RF (front-mounting), page 9 P2R (back-mounting), pages 11 and 12 P7TF (front- mounting), page 12Number of pins Solder terminals PCB terminals 5 pins P2RF-05 Approx. 27 g P2RF-05-E* Approx. 38 g P2RF-05-S Approx. 36 g P2R-05A Approx. 5 g P2R-05P Approx. 5 g P2R-057P Approx. 5.5 g P7TF-05 Approx. 28 g 8 pins P2RF-08 Approx. 33 g P2RF-08-E Approx. 38 g P2RF-08-S Approx. 40 g P2R-08A Approx. 5 g P2R-08P Approx. 5 g P2R-087P Approx. 5.5 g --- Number of pins Model P2RF P2R P7TF Minimum order lot (pcs) 5 pins P2RF-05 P2R-05A P2R-05P P7TF-05 8 pins P2RF-08 P2R-08A P2R-08P --- Model PYF (front-mounting), page 14 PY (back-mounting), page 15 Number of pins Solder terminals Wrapping terminals PCB terminals 8 pins 11 pins 1 ? 14 pins PYF08A Approx. 32 g PYF08A-E *1 PYF08M Approx. 26 g PYF08S Approx. 46 g PY08 Approx. 8 g PY08-Y1 PY08-Y3 PY08QN Approx. 12 g PY08QN2 PY08QN-Y1 PY08QN2-Y1 PY08-02 *2 Approx. 7.2 g PYF11A Approx. 43 g PY11 Approx. 9 g PY11-Y1 PY11QN PY11QN2 PY11QN-Y1 PY11QN2-Y1 PY11-02 *2 PYF14A-E*1 PYF14A Approx. 49 g PYF14T Approx. 53 g PYF14S Approx. 62 g PY14 Approx. 10 g PY14-Y1 PY14-Y3 PY14QN Approx. 14 g PY14QN2 PY14QN-Y1 PY14QN2-Y1 PY14QN-Y3 PY14QN2-Y3 PY14-02 *2

Products Related to Common Sockets and DIN Tracks Note: 1. The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. 2. Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards. *1. Use a #1 Phillips screwdriver to tighten the screws on this Socket. *2. The structure does not resist flux. Manual soldering is recommended for this product. Note: The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. * Use a #1 Phillips screwdriver to tighten the screws on this Socket. * The structure does not resist flux. Manual soldering is recommended for this product. Minimum Order Lot The following models are available at the minimum order lot specified below. Model PTF (front-mounting), page 17 PT (back-mounting), page 18 Number of pins Solder terminals Wrapping terminals PCB terminals 8 pins 11 pins 14 pins Number of pins Model PYF PY PTF PT Minimum order lot (pcs) 8 pins PYF08A PYF08M PY08 PTF08A PT08 1011 pins PYF11A PY11 PTF11A PT11 14 pins PYF14A PY14 PTF14A PT14 PTF08A Approx. 47 g PTF08A-E *1 PT08 Approx. 11 g PT08QN Approx. 10.4 g PT08-0 *2 Approx. 8 g PTF11A Approx. 61 g PT11 Approx. 13 g PT11QN PT11-0 *2 Approx. 12.2 g PTF14A Approx. 77 g PTF14A-E *1 PT14 Approx. 17 g PT14QN Approx. 20 g PT14-0 *2 Approx. 16.2 g Model P7S/P7SA, pages 20 and 21 Number of pins Front-mounting PCB terminals 10 pins 14 pins P7SA-10F Approx. 44 g P7SA-10F-ND Approx. 44 g P7SA-10P Approx. 9 g P7S-14F-END Approx. 110 g P7SA-14F Approx. 59 g P7SA-14F-ND Approx. 59 g P7S-14P-E Approx. 25 g P7SA-14P Approx. 10 g Model P7LF (front-mounting), page 20Number of pins6 pins P7LF-06 Approx. 60 g Note: Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards.

Products Related to Common Sockets and DIN Tracks Round Sockets Note: The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. * Use a #1 Phillips screwdriver to tighten the screws on this Socket. Minimum Order Lot The following models are available at the minimum order lot specified below. Terminal Cover Model PF (front-mounting), page 22 P2CF (front-mounting), page 23 PFA (front-mounting), page 24 P3G (back-mounting), page 25 PL (back-mounting), page 26 Number of pins Solder terminals Wrapping terminals PCB terminals 8 pins 11 pins Number of pins Model PF P2CF PFA P3G PL 8 pins PF083A, PF085A P2CF-08, P2CF-08-E 8PFA. 8PFA1 P3G-08 PL08 11 pins PF113A P2CF-11, P2CF-11-E 11PFA P3GA-11 PL11 14 pins --- --- 14PFA --- PL15 Minimum order lot (pcs) 20 10 20 10 Model Y92A-48G Appearance PF083A Approx. 34 g PF083A-E * PF085A Approx. 40 g P2CF-08 Approx. 55 g P2CF-08-E 8PFA Approx. 57 g 8PFA1 Approx. 66 g P3G-08 Approx. 40g Note: The Y92A-48G Terminal Cover can be used to provide finger protection. PL08 Approx. 14 g PL08-Q Approx. 15 g PLE08-0 Approx. 10.6g PF113A Approx. 47 g PF113A-E * P2CF-11 Approx. 70g P2CF-11-E 11PFA Approx. 74 g P3GA-11 Approx. 47 g Note: The Y92A-48G Terminal Cover can be used to provide finger protection. PL11 Approx. 15 g PL11-Q Approx. 18.5A PLE11-0 Approx. 10.8 g 14PFA Approx. 104 g PL15 Approx. 28 g PL20 Approx. 17 g Note: Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards.

Products Related to Common Sockets and DIN Tracks Hold-down Clips (Unit: mm) For Square Sockets For Round Sockets 71.8 9.6 4.5 1 2.5 2.7 2.7 3.3 4.5 PKC One Set (2 Clips) 36.3 40.7 PTC-1 4.5 1.2 36.3 5 max. 4.5 PYC-A1 Approx. 0.54 g One Set (2 Clips) 4.5 1.2 42.8 5 max. 4.5 PYC-A2 One Set (2 Clips) 4.5 ±0.1 5.8 1.2 4.3 36.3 5 max. PYC-E1 One Set (2 Clips) 38.5 Approx. 329 max. PYC-P Approx. 1.4 g PYC-P2 Approx. 1.2 g 2.5 PYC-S Approx. 1.8 g 9.4 58.2 PYC-1 Approx. 6 g Approx. 328.8 PYC-2 29.5 44.5 PYC-3 3.7 41.7 PYC-5 3.7 34.5 PYC Approx. 0.2 g 3.5 3 5 72.9 10 2 1.5 1.5 34.7 23.5 Y92H-1 5 max. 4.51.24.5 Y92H-3 One Set (2 Clips) 30.5 24.5 2.5 (84°) 33.7 Y92H-4 4.6 6260.8 4.56 PFC-A1 Approx. 2.2 g One Set (2 Clips) 6 4.5 73.3 74.5 4.6 PFC-A6 Approx. 2.4 g One Set (2 Clips) 4.6 95.294 4.56 PFC-A7 Approx. 3.0 g One Set (2 Clips) 7.6 56.6 PLC Approx. 2.4 g One Set (2 Clips) 56.3 PLC-1 Approx. 2.6 g One Set (2 Clips) 65.769.2 PLC-7 Approx. 3.0 g One Set (2 Clips) 86.790.2 PLC-8 Approx. 6.4 g One Set (2 Clips) 66.2 PLC-10 Approx. 2.0 g One Set (2 Clips) 64.3 PLC-12 Approx. 5.4 g One Set (2 Clips) Minimum Order Lot The following models are available at the minimum order lot specified below. Type Model Minimum order lot (pcs) For Square Sockets PYC-A1 PYC-P 100 PYC-A2 PYC-S PYC-1 PYC-2 PYC-3 PYC-5 For Round Sockets PFC-A1 PFC-A6 PFC-A7 PLC

Products Related to Common Sockets and DIN Tracks Specifications Socket Characteristics Model Continuous carry current Dielectric strength Insulation resistance*1 Remarks P2RF-05(-E)(-S) 10 A Between contact terminals of same polarity: 1,000 VAC for 1 min 1,000 MΩ min. Between coil and contact terminals: 4,000 VAC for 1 min P2RF-08(-E)(-S) 5 A Between contact terminals of different polarity: 3,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,000 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min P2R-05P 10 A Between contact terminals of same polarity: 1,000 VAC for 1 min 1,000 MΩ min. Between coil and contact terminals: 4,000 VAC for 1 min P2R-08P 5 A Between contact terminals of different polarity: 3,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,000 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min P2R-057P 10 A Between contact terminals of same polarity: 1,000 VAC for 1 min 1,000 MΩ min. Between coil and contact terminals: 5,000 VAC for 1 min P2R-087P 5 A Between contact terminals of different polarity: 3,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,000 VAC for 1 min Between coil and contact terminals: 5,000 VAC for 1 min P2R-05A 10 A Between contact terminals of same polarity: 1,000 VAC for 1 min 1,000 MΩ min.Between ground terminals: 1,500 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min P2R-08A 5 A Between contact terminals of different polarity: 3,000 VAC for 1 min 1,000 MΩ min. Between contact terminals of same polarity: 1,000 VAC for 1 min Between ground terminals: 1,500 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min P7TF-05 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. PYF08A(-E)(-S) 7 A, -S models: 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. The continuous carry current of 10 A for the PYF08S is for an ambient temperature of 55°C. At an ambient temperature of 70°C, the value is 7 A. PYF11A 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. PYF14A(-E)(-S) 3 A, -S models: 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. PY08(-Y1) 7 A Between terminals: 1,500 VAC for 1 min 1,000 MΩ min. PY08QN(-Y1) 7 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY08-02 7 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY11(-Y1) 5 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY11QN(-Y1) 5 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY11-02 5 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY14(-Y1) 3 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY14QN(-Y1) 3 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PY14-02 3 A Between terminals: 1,500 VAC for 1 min 100 MΩ min. PTF@@A(-E) 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min. PT@@ 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min. PT@@QN 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min. PT@@-0 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min. P7LF-06 30 A Between contact terminals of different polarity: 2,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 2,000 VAC for 1 min Between coil and contact terminals: 4,000 VAC for 1 min PF@@@A 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. P2CF 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. P3G(A) 6 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. 8PFA(1) 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. 11PFA(1) 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. PL@(-Q) 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. PLE@@-0 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min. P6D-04P 5 A Between contact terminals of same polarity: 1,000 VAC for 1 min 100 MΩ min. Between coil and contact terminals: 3,000 VAC for 1 min P7S-14@-E(ND) 10 A Between contact terminals of different polarity: 2,000 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,500 VAC for 1 min Between coil and contact terminals: 2,000 VAC for 1 min

Products Related to Common Sockets and DIN Tracks *1. The insulation resistance was measured with a 500-VDC insulation resistance meter at the same places as those used for measuring the dielectric strength. Safety Precautions Refer to Common Relay Precautions for general precautions. P7SA-10@ 6 A *2 Between contact terminals of different polarity: 2,500 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,500 VAC for 1 min Between coil and contact terminals: 2,500 VAC for 1 min P7SA-14@ 6 A *2 Between contact terminals of different polarity: 2,500 VAC for 1 min 1,000 MΩ min.Between contact terminals of same polarity: 1,500 VAC for 1 min Between coil and contact terminals: 2,500 VAC for 1 min Model Continuous carry current Dielectric strength Insulation resistance*1 Remarks

Products Related to Common Sockets and DIN Tracks Dimensions P2RF (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions --- 19.5 max. 19.5 30 max. 35.5 4 dia. 54 max. 71.5 max. 5-M3.5×8 7±0.2P2RF-05 (One Pole) 5 1 (Top View) 9.5 30±0.05 4.2-dia. hole M3 (M3 x 16) or 3.2-dia. hole Note: Track mounting is also possible. Refer to page 27. (Top View) *When mounted on H3RN-1@. 61 max. 164 85.5 max. 5-M3.5×7 3.5-dia. hole ±0.2 11.5 48 max. 59 max. (80.9 max.)* 39.5 35.5 P2RF-05-E (One Pole) (Finger Protection Structure) (11) (14) (A1) (12) (A2) Note: Figures in parentheses indicate DIN standard numbers. (Top View) 39.5±0.1 3.2-dia. hole M3 or 3.5-dia. hole Note: Track mounting is also possible. Refer to page 27. (Top View) 91.8 max. 32.6 28.5 22.6 27.6 32.6 35.3 24.5 18.0 max. (2.4) (5.3) P2RF-05-S (One Pole) (Screwless Model) 4 1 5 (11) (14) (12) (A1) (A2) Note: Figures in parentheses indicate DIN standard numbers. (Top View)7±0.2 19.5 max. 19.5 30 max. 35.5 4 dia. 54 max. 71.5 max. 8-M3.5×8 P2RF-08 (Two Poles) 5 4 7 2 8 1 6 3 (Top View) 9.5 30±0.05 4.2-dia. hole M3 (M3 x 16) or 3.2-dia. hole Note: Track mounting is also possible. Refer to page 27. (Top View)

Products Related to Common Sockets and DIN Tracks P2RF (Unit: mm) Note: 1. If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. 2. Refer to pages 28 and 30 for the features of Screwless Sockets and for precautions for correct use. Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions --- 1.52 85.5 max. 8-M3×8 3.5-dia. hole 6+0.2 −0.1 48 max. 3 dia. 35.5 11.561 max. 39.5 63 max. (84.9 max.)* *When mounted on H3RN-2@. P2RF-08-E (Two Poles) (Finger Protection Structure) (21) (22) (11) (24) (A1) (14) (12) (A2) 5 4 7 2 6 3 (Top View) Note: Figures in parentheses indicate DIN standard numbers. 39.5±0.1 3.2-dia. hole M3 or 3.5-dia. hole Note: Track mounting is also possible. Refer to page 27. (Top View) (3.4) 18.0 max. 22.6 27.6 32.6 28.6 32.6 24.5 35.391.8 max. (5.3)(2.4) P2RF-08-S (Two Poles) (Screwless Model) (A1) (A2) (21) (11) (24) (14) (22) (12) Note: Figures in parentheses indicate DIN standard numbers. (Top View)

Products Related to Common Sockets and DIN Tracks P2R (Unit: mm) Note: If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. Dimensions Terminal Arrangement/ Internal Connections PCB Dimensions 3.5 7.514.5 max. 35.5 max. 3.5 1.5 7 4 36.5 max. 1.2 15 4.5 P2R-05P (One Pole) 1 5 (Bottom View) Five, 1.6-dia. holes 4.5 (5) (Bottom View) 1.5 7.5 2.8 0.3 7.5 3.5 35.5 max. 14.5 max. 36.5 max. P2R-08P (Two Poles) 4 5 3 6 2 7 1 8 (Bottom View) (4.3) 7.5 Eight, 1.3-dia holes (Bottom View) 29.6 0.7 8.7 8.7 14 max. 16.4 10.4 7.4 41 max. 37 max. 3.5 7 4 8.75 4.5 P2R-057P (One Pole) (Bottom View) 4±0.1 Five, 1.6-dia. holes 4±0.1 15±0.1 6±0.1 4.5±0.1 7±0.1 (8.75) (Bottom View) 7.5 8.9 41 max. 7.4 0.3 16.4 10.4 29.137 max. 14 max. 7.5 3.5 8.1 P2R-087P (Two Poles) 4 5 3 6 2 7 1 8 (Bottom View) 7.5 Eight, 1.3-dia holes (8.1) (Bottom View)

Products Related to Common Sockets and DIN Tracks P2R (Unit: mm) Note: If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. P7TF (Unit: mm) Note: If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is positive. Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 0.3 7.5 1.2 4.5 Five, 3 x 1.8-dia. holes 16.73.8 36.5 max. 6.7 35.5 max. 14.5 max. P2R-05A (One Pole) 1 5 (Bottom View) 30.5+0.2 13.6±0.1 (Use panel with thickness of 1.6 to 2.0 mm.) 36.5 max. 7.5 1.5Eight, 3 x 1.2-dia. holes 14.5 max. 35.5 max. 2.82.6 20 7.5 6.5 1.2 0.3 P2R-08A (Two Poles) 4 5 3 6 2 7 1 8 (Bottom View) 19 max. 7+0.2 5-M3.5×8 71.5 max. 12.5±0.2 59 max. 19.5 35.5 P7TF-05 (Top View) 12.5±0.2 62±0.1 M3 or M4* Note: Track mounting is also possible. Refer to page 27. * We recommend that you use washers if you use M3 bolts or screws. Washers are not required with M4 bolts or screws. (Top View)

Products Related to Common Sockets and DIN Tracks PYF (Unit: mm) Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions --- 35.4 3.4 16.523 max. 30 max. 72 max. 6+0.2 −0.1 8-M3×8 Two, 4.2 × 5 mounting holes 3.4 35.4 16.5 31 max. 23 max. 72 max. 8-M3×8 Two, 4.2 × 5 mounting holes 6+0.2 −0.1 PYF08A PYF08A-E (Finger Protection Structure) 4 1 912 14 13 (Top View) Two M3 or M4 or 4.5-dia. holes 59±0.3 15±0.2 Note: Track mounting is also possible. Refer to page 27. (Top View) 7±0.2 3 dia. 18 max. 44.5 max. 3.5-dia. mounting holes 6.5-dia. countersinking, depth: 11.5 33.5 max. 1.5 8-M3.5×7.5 PYF08M (Top View) 20±0.1 3.5-dia. hole 3.5-dia. or M3 hole 32.6 27.6 22.6 (5.3) (3.4) (5) 28.6 32.6 35.4 24.5 36.5 max. 38.2 max. 23.2 max. 85 max. PYF08S (Screwless Model) (41) (11) (44) (42) (A2) (A1) (12) (14) (Top View) Note: Figures in parentheses indicate DIN standard numbers. 29.5 max. Two, 4.2 × 5 mounting holes 11-M3×8 3.4 35.4 16.5 30 max. 72 max. +0.2 −0.1 PYF11A 456 789 11 10 (Top View) 22±0.2 59±0.3 Two M3 or M4 or 4.5-dia. holes Note: Track mounting is also possible. Refer to page 27. (Top View)

Products Related to Common Sockets and DIN Tracks PYF (Unit: mm) Note: Refer to pages 28 and 30 for the features of Screwless Sockets and for precautions for correct use. Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions --- 29.5 max. Two, 4.2 × 5 mounting holes 14-M3×8 3.4 35.4 16.5 30 max. 72 max. 6+0.2 −0.1 29.5 max. Two, 4.2-dia × 5 mounting holes 14-M3×8 3.4 35.4 16.5 31 max. 72 max. 6+0.2 −0.1 PYF14A PYF14A-E (Finger Protection Structure) 91012 11 144 13 68 7 (Top View) 22±0.2 59±0.3 Two M3 or M4 or 4.5-dia. holes Note: Track mounting is also possible. Refer to page 27. (Top View) 7±0.2 11 11.5 23.5 35.5 17.8 33 max.Two, 4.2-dia × 5 mounting holes 14-M3.5×8 70 max. 17.44 PYF14T 24.5 2-M4 Note: Track mounting is also possible. Refer to page 27. (Top View) 36.5 max. (4.15) (3.4) 85 max. 31 max. 22.6 27.6 32.6 24.55 35.4 28.6 32.6 PYF14S (Screwless Model) 56 78 9 10 11 12 1 2 3 4 13 14 (42) (32) (A2) (A1) (22) (12) (Top View) Note: Figures in parentheses indicate DIN standard numbers.

Products Related to Common Sockets and DIN Tracks Relay Sockets and Socket Bridges for PYF Bridges within the Same Socket Note: 1. The @ in the model number is replaced with the insulation color specification code. B: Black, Y: Yellow 2. Specify the number of bags when ordering. Bridges between Adjacent Sockets Note: 1. The @ in the model number is replaced with the insulation color specification code. B: Black, S: Blue, R: Red 2. Specify the number of bags when ordering. Socket Bridges Note: 1. Use the Socket Bridges for relay coil bridge wiring. 2. Specify the number of bags when ordering. Safety Precautions Maximum Carry Current  The total current of all bridged poles must not exceed the maximum carry current of the Socket Bridge.  Make sure that the maximum carry current of t he relay contacts is also not exceeded for each pole.  If you use more than one Socket, use End Plates (PFP-M). Pitch Applicabl e models Appearance Dimensions (mm) Model Specifications mm PYF14A PYD-020B@(2P) Max. carry current: 20 A (18 A at 70°C) Ambient operating temperature: -40 to 70°C (with no icing or condensation) Ambient operating humidity: 45% to 85% (with no icing or condensation) Conductor material: Brass Conductor surface treatment: Nickel plating Package qty: 50/bag PYD-030B@(3P) Pitch Applicabl e models Appearance Dimensions (mm) Model Specifications mm PYF08A PYD-025B@(2P) Max. carry current: 20 A (18 A at 70°C) Ambient operating temperature: -40 to 70°C (with no icing or condensation) Ambient operating humidity: 45% to 85% (with no icing or condensation) Conductor material: Brass Conductor surface treatment: Nickel plating Package qty: 10/bagPYD-085B@(8P) mm PYF14A PYD-026B@(2P) Max. carry current: 20 A (18 A at 70°C) Ambient operating temperature: -40 to 70°C (with no icing or condensation) Ambient operating humidity: 45% to 85% (with no icing or condensation) Conductor material: Brass Conductor surface treatment: Nickel plating Package qty: 10/bagPYD-086B@(8P) Pitch Applicable models Appearance and dimensions (mm) Model Insulation color 19.7 mm PYF08S PYDM-08SR Red PYDM-08SB Blue 27.5 mm PYF14S PYDM-14SR Red PYDM-14SB Blue 14.3 mm P2RF-@@-S P2RM-SR Red P2RM-SB Blue 3.2 5.6 7 7 3.2 5.6 22 40° 3.3 5.6 154 40° 3.3 5.6 29 40° 3.3 5.6 203 40° 3.3 5.6 Guide: 1.2 dia. Insulating coating Pitch

Products Related to Common Sockets and DIN Tracks PY (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions L 20 max. 2.7 * Eight, 3 x 1.2 ellipses 7.7 24 max. 2.6 25.5 max. 29.5 max. *The PY08-Y@ includes the part outlined by the dashed lines above. PY08 PY08-Y1 (L = 42 max.) PY08-Y13 (L = 60 max.) 1 4 5 8 9 12 13 14 (Bottom View) 4.1 12.656.35 6.4 4.2 Eight, 1.3-dia holes 5.8 13.2 25.8±0.2 21.4+0.2 42 max. 41.5 max. (36.5 max.)*2 2.7 (20)*2 25 22 max. 24 max. 29.5 max. *1. The PY08QN(2)-Y1 includes the part outlined by the dashed lines above. *2. The figures in the parentheses are for the PY08QN2(-Y1). PY08QN PY08QN2 PY08QN-Y1 PY08QN2-Y1 16.5 max. 2.7 4.3 0.3 22 max. 25.5 max. 1.0 29.5 max. PY08-02 * The structure does not resist flux. Manual soldering is recommended for this product. 42 max. 20 max. 2.7 * Eleven, 3 x 1.2 ellipses 7.7 24 max. 2.6 25.5 max. 29.5 max. *The PY11-Y1 includes the part outlined by the dashed lines above. PY11 PY11-Y1 21 3 54 6 87 9 10 11 (Bottom View) 4.1 12.656.35 6.4 4.2 Eleven, 1.3-dia holes 5.8 13.2 25.8±0.2 21.46+0.2 22 max. 24 max. 29.5 max. 42 max. 41.5 max. (36.5 max.)*2 2.7 (20)*2 *1. The PY11QN(2)-Y1 includes the part outlined by the dashed lines above. *2. The figures in the parentheses are for the PY11QN2(-Y1). PY11QN PY11QN2 PY11QN-Y1 PY11QN2-Y1 2.7 4.3 0.3 22 max. 25.5 max. 1.0 29.5 max. 16.5 max. PY11-02 * The structure does not resist flux. Manual soldering is recommended for this product.

Products Related to Common Sockets and DIN Tracks Note: 1. Use a panel with a thickness of 1 to 2 mm when mounting a Socket on it. 2. You can use the PY14-Y1 or PY14QN-Y1 for the MY4 Series, MY4H, MYQ4(Z), or MY2K. 3. You can use the PY14-Y3 or PY14QN-Y3 for H3Y Timers. PTF (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions 20 max. 2.7 * Fourteen, 3 x 1.2 ellipses 7.7 24 max. 2.6 25.5 max. 29.5 max. L *The PY14-Y@ includes the part outlined by the dashed lines above. PY14 PY14-Y1 (L = 42 max.) PY14-Y3 (L = 60 max. ) 321 4 765 8 11109 12 13 14 (Bottom View) 25.8±0.2 21.4+0.2 4.1 12.656.35 6.4 4.2 Fourteen 1.3-dia. holes 5.8 13.2 4.4 L 22 max. 24 max. 29.5 max. 41.5 max. (36.5 max.)*2 2.7 (20)*2 *1. The PY14QN-Y@ and PY14QN2-Y@ include the part outlined by the dashed lines above. *2. The figures in the parentheses are for the PY14QN2(-Y@). PY14QN PY14QN2 PY14QN-Y1 (L = 42 max.) PY14QN2-Y1 (L = 42 max.) PY14QN-Y3 (L = 60 max.) PY14QN2-Y3 (L = 60 max.) 2.7 4.3 0.3 22 max. 25.5 max. 1.0 29.5 max. 16.5 max. PY14-02 * The structure does not resist flux. Manual soldering is recommended for this product. 35.4 30 max.28.5 max. 78.5 max. 3.4 8-M3.5×8 Two, 4.5 × 6 mounting holes 7±0.2 PTF08A 6 5 8 7 2 1 (Top View) 68±0.3 Two, 4.5 dia. or M4 mounting holes 19±0.2 Note: Track mounting is also possible. Refer to page 27. (Top View) 35.5 3.4 33 max.28.5 max. 78.5 max. 8-M3.5×8 Two, 4.5 × 6 mounting holes PTF08A-E (Finger Protection Structure)

Products Related to Common Sockets and DIN Tracks Note: If you use the PTF08A, PTF08A-E, or PT08 with an LY1 Relay, connect the following terminal pairs: 1-2, 3-4, and 5-6 (for usage at 10 A or higher). PT (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 3.4 30 max. 37 max. 78.5 max. 11-M3.5×8 Two, 4.5 × 6 mounting holes 35.4 7±0.2 PTF11A 6 5 4 3 2 1 (Top View) 68±0.3 Two, 4.5 × 6 mounting holes 27.5±0.2 Note: Track mounting is also possible. Refer to page 27. (Top View) 30 max. 45.5 max. 78.5 max. Two, 4.5 × 6 mounting holes 35.4 3.47 ±0.2 14-M3.5×8 PTF14A 11 10 912 1314 7 6 5 4 3 2 1 (Top View) 68±0.3 Two, 4.5 dia. or M4 mounting holes 36±0.2 (Top View) Note: Track mounting is also possible. Refer to page 27. 7±0.2 33 max. 45.5 max. 78.5 max. Two, 4.5 × 6 mounting holes 14-M3.5×8 35.5 3.4 PTF14A-E (Finger Protection Structure) 20.5 max. Eight, 1.7-dia × 3.5 oblong holes 2.7 0.3 24 max. 25.5 max. 29.5 max. 24 max. 29.5 max. 25.5 max. 1.0 1.5×1.0 1.52.7 2.5 20 35 max. PT08 PT08QN 7 8 (Bottom View) 21.4+0.2 25.8±0.2 0.3 2 5* 4.31 18 max. 22 max. 6.5 29.5 max.  The structure does not resist flux. Manual soldering is recommended for this product. *Maintain a sufficient distance from the pattern when using double-sided PCBs. PT08-0 5.35 15.6 6.5 6.45 Eight, 2.5-dia. holes 12.45 4.6 (±0.1 tolerance)

Products Related to Common Sockets and DIN Tracks Note: Use a panel with a thickness of 1 to 2 mm when mounting a Socket on it. Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions 30.6 26.41.2 Eleven, 1.7-dia × 3.5 holes 0.3 20.5 max. 2.7 29.5 max. max. 35 max. 2.5 20 29.5 max. 26.41.2 1.0 1.5×1.0 2.7 max.30.61.5 PT11QNPT11 4710 1 58 2 6911 3 (Bottom View) 26.6+0.3 31±0.2 32 max. 6.24.32.7 25 * 0.3 18 max. 29.5 max.  The structure does not resist flux. Manual soldering is recommended for this product. *Maintain a sufficient distance from the pattern when using double-sided PCBs. PT11-0 6.45 4.6 Eleven, 2.5-dia. holes 5.2 21.4 5.8 6.2 5.65 12.45 (±0.1 tolerance) 42.5 max. 0.3 Fourteen, 1.7-dia × 3.5 holes 2.7 20.5 max. 26.5 max. 29.5 max. 1.0 1.5×1.0 35 max. 2.7 2.5 20 1.5 42.5 max. 26.5 max. 29.5 max. PT14 PT14QN 5913 1 610 2 711 812 14 4 (Bottom View) 26.6+0.3 41±0.2 42.5 max. 29.5 max. 17.5 max. 2.7 4.3 26.5 max. 6.4 25 * 0.3  The structure does not resist flux. Manual soldering is recommended for this product. *Maintain a sufficient distance from the pattern when using double-sided PCBs. PT14-0 5.1 31.4 5.8 6.4 12.45 4.6 6.45 5.45 Fourteen, 2.5-dia. holes (±0.1 tolerance)

Products Related to Common Sockets and DIN Tracks P7LF (Unit: mm) P7S (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions 8±0.05 9.2±0.05 Two, M3.5 x 6 (coil side) 25 5 51.5 max. 46 max.40±0.1 55.5 max. Four, M4 × 8 (contact side) P7LF-06 2 4 6 8 0 1 (Top View) Two, 4.5 dia. or M4 mounting holes 40±0.1 40 max. 33±0.1 7.5 14-M3.0×8 Indicator LED 90.5 max. (5) 5.93.1 80 max. P7S-14F-END 520 4443 41 42 33±0.1 Two, 4.0 dia. or M3.5 70.5 max. 23.5 max. Two, 6.5 dia., depth: 8 16.9 7 (15)6 4.1 13.2 5×7=35 23.5 max. 14.5 57 max. 28±0.2 P7S-14P-E G7S-4A2B-E Mounted G7S-3A3B-E Mounted 14.5 (21)4.2 2.8 28±0.2 (16.9) 5×7=35 Two, 3.6 dia. Fourteen, 2.5 dia. 6 7

Products Related to Common Sockets and DIN Tracks P7SA (Unit: mm) Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions 22.5 max.R2 10-M 3×8 9 max. 5 9 max. 60.5 max. 72 max. Indicator LED 4 dia. P7SA-10F P7SA-10F-ND Note: 1. The Socket is shown with the finger cover removed. 2. Only the -ND Sockets have LED indicators (orange). 44 33 34 11 1 0 11 1 0 44 33 34 G7SA-3A1B Mounted G7SA-2A2B Mounted * This display circuit is available only for "-ND" models. Note: Terminals 23-24, 33-34, and 43-44 are normally open. Terminals 11-12 and 21-22 are normally closed. 80±0.2 14.5±0.2 Two, 4 dia. or M3.5 (Top View) 30 max. 9 max. 9 max. 60.5 max. 72 max. 4 dia. 14-M3×8 Indicator LED P7SA-14F P7SA-14F-ND Note: 1. The Socket is shown with the finger cover removed. 2. Only the -ND Sockets have LED indicators (orange). 23 1 0 11 54 64 21 1 0 11 54 64 21 1 0 11 *** G7SA-5A1B Mounted G7SA-4A2B Mounted G7SA-3A3B Mounted * This display circuit is available only for "-ND" models. Note: Terminals 23-24, 33-34, 43-44, 53-54, and 63-64 are normally open. Terminals 11-12, 21-22, and 31-32 are normally closed. 80±0.2 22±0.2 Two, 4 dia. or M3.5 (Top View) 50 max. 0.50.5 15 max. 41.5 max. 3.5 (11.1)0.4(11.1) Three, 2.6 dia. (for M3 tapping screws) 24.84.1 39.9 0.8 P7SA-10P 4424 23 12 11 4422 21 12 11 G7SA-3A1B Mounted G7SA-2A2B Mounted (Bottom View) Note: Terminals 23-24, 33-34, and 43-44 are normally open. Terminals 11-12 and 21- 22 are normally closed. 24.8±0.2 39.9±0.2 Three, 3.2 dia. (for M3 tapping screws) (7.14) 13.97 11.43 4.1 ±0.2 5.085.08 Ten, 1.1 dia. holes 10.16 (Bottom View) (±0.1 tolerance) 60 max. 0.50.5 15 max. 41.5 max. 3.5 (11.1) 0.4 Three, 2.6 dia. (for M3 tapping screws) 49.9 0.8 24.84.1 (11.1) P7SA-14P 64 63 53 34 4424 23 12 11 64 63 53 34 4422 21 12 11 64 63 53 32 4422 21 12 11 G7SA-5A1B Mounted G7SA-4A2B Mounted G7SA-3A3B Mounted (Bottom View) Note: Terminals 23-24, 33-34, 43-44, 53-54, and 63- 64 are normally open. Terminals 11-12, 21-22, and 31-32 are normally closed. 24.8±0.2 49.9±0.2 (7.14) 13.97 5.08 5.08 4.1±0.2 5.08 5.08 10.16 Three, 3.2 dia. (for M3 tapping screws) 11.43 Fourteen, 1.1 dia. holes (Bottom View) (±0.1 tolerance)

Products Related to Common Sockets and DIN Tracks PF (Unit: mm) Note: 1. For the PF083A and PF113A, the Socket key slot is on the top. (Applicable model: MK) 2. The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 21 max. 23.533 Two, 4.2 dia. holes 35.4 7±0.2 52 max. 41 max. 8-M3.5×7 PF083A 2 1 8 7 3 4 5 6 (Top View) 33±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. Refer to page 27. 41 max. 7±0.2 Two, 4.2-dia mounting holes 8 25 dia. 21 max. 23.5 35.4 52 max. 8-M3.5×7 PF083A-E 7±0.2 33±0.24 58 max. 8-M3.5×7 35.4 21.6 max. 21.1 3.540 max. Two, 4.5 dia. holes PF085A 6 5 4 3 7 8 1 2 (Top View) 7±0.2 31 max. 35.4 2211-M3.5×7 23.5 43 max. 34 45 52 max. PF113A 1 11 10 6 7 8 (Top View) 34±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. Refer to page 27. 31 max. 5.5 3.5 35.48 7±0.211-M3.5×5 4 5.2 4.2 52 max. 42.8 PF113A-E

Products Related to Common Sockets and DIN Tracks P2CF (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 70 max. Two, 4.5 dia. holes 8-M3.5×7.5 7.8 20.3 max. 4.53 50 max. 35.4 P2CF-08 6 5 4 3 7 8 1 2 (Top View) 40±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. Refer to page 27. 127 8 4365 P2CF-08-E 10A250VAC RESISTIVE 70 max. Two, 4.5 dia. holes 8-M3.5×7.5 7.8 21.5 max. 20.3 4.5 35.41.3 50 max. 40±0.2 P2CF-08-E 70 max. 50 max. Two, 4.5 dia. holes 11-M3.5×7.5 7.8 31.2 max. 4.53 35.4 P2CF-11 8 7 6 5 10 11 1 2 (Top View) 40±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. Refer to page 27. 10 11 12 78 65 P2CF-11-E 10A250VAC RESISTIVE 70 max. 50 max. 40±0.2 Two, 4.5 dia. holes 11-M3.5×7.5 7.8 31.2 max. 4.5 35.41.2 5P2CF-11-E

Products Related to Common Sockets and DIN Tracks PFA (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions 118 max. 51 max. 24 max. 40±0.2 81 max. 35.4 Two, 4.5 dia. holes 7.8±0.28-M3.5×7 8PFA 6 5 4 3 7 8 1 2 (Top View) 40±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. Refer to page 27. 8-M3.5×7 93 max. 7.8±0.2 130 max.35.4 Two, 4.5 dia. holes 24 max. 51 max. 40±0.24 8PFA1 40±0.2 81 max. 11-M3.5×7 7.8±0.2 Two, 4.5 dia. holes 35.4 118 max. 51 max. 33.5 max. 11PFA 8 7 6 5 10 11 1 2 (Top View) 40±0.2 Two M4 or 4.5-dia. holes Note: Track mounting is also possible. Refer to page 27. 60±0.2 Two, 4.5 dia. holes 33.5 max. 35.4 118 max. 7.8±0.214-M3.5×7 72 max. 81 max. 14PFA 7 14 6 4 5 12 15 1 29 10 11 (Top View) 60±0.2 Two, 4.5 dia. or M4 mounting holes Note: Track mounting is also possible. Refer to page 27.

Products Related to Common Sockets and DIN Tracks P3G/P3GA (Unit: mm) Terminal Cover (Unit: mm) Release Lever (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting Hole Dimensions --- --- Appearance Dimensions Applicable models Appearance Dimensions Model PYF08S PYCM-08S PYF14S PYCM-14S P2RF-05-S P2CM-S P2RF-08-S 27 dia. 4.9 17 Eight, M3.5 SEMS screws P3G-08 Note: The Y92A-48G Terminal Cover can be used to implement finger protection. 43 5 6 12 8 7 (Bottom View) Eleven, M3.5 SEMS screws 27 dia. 4.5 16.3 6.2 25.645 P3GA-11 Note: The Y92A-48G Terminal Cover can be used to implement finger protection. 8765 2 1 11 10 (Bottom View) Y92A-48G UP P C Twelve, 6.4 dia. 47.7 × 47.7 48 × 48 27.624.616.5 47.4 Y92A-48G 54.4 32.7 29.6 52.5 16.8 40.35

Products Related to Common Sockets and DIN Tracks PL (Unit: mm) Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions (bottom view) 30 dia. Approx. 20.5 3.9 Two, 2 dia. holes 50.5 max. 50.5 max. 3.5 PL08 1 8 (Bottom View) 40±0.3 31-dia. hole Two, 3.5 dia. or M3 device mounting holes Two, 3.5 or M3 Socket mounting holes L L = 40 mm MK2(Z)P L = 74 mm PU, AMD-S, MM2(X)P, CZ, STP, H3L, TDS, DTS, DSP, TDF, TDV L = 86 mm 61F-GP/-APN, G4Q-212S, RD2P, RDA, TDA, AGF, SE, SAD, K2CU, SDV-F 51 max. 35 max. 3.5 4 30 dia. 35 max. t0.6×1.3 PL08-Q 40±0.3 31-dia. hole Two 3.5-dia. or two M3 Socket mounting holes MK2(Z)P 29±0.1 dia. t0.3 21.5 max. PLE08-0 27.7±0.5 dia. Two 3.5-dia. Hold-down Clip mounting holes 45° Eight, 2.5-dia. holes +0.1

0 MK2(Z)P

3.5 35 max. 30 dia. Approx. 20.5 3.9 Two 2-dia. holes 1 4 51 max. PL11 2 1 11 10 (Bottom View) 40±0.3 31-dia. hole Two, 3.5 dia. or M3 device mounting /Hold-down Clip mounting holes Two, 3.5 dia. or M3 Socket mounting holes L L = 40 mm MK3P MK2KP L = 74 mm MM3P MK2(X)KP L = 42 mm MK3ZP MK3LP 51 max. 35 max. 3.5 4 35 max. t0.6×1.3 PL11-Q 22 max. t0.3 29±0.1 dia. PLE11-0 28.7±0.5 Two, 3.5-dia. holes Applicable model/Hold-down Clip mounting holes L Eleven, 2.5-dia. holes 360° L = 42 mm MK3ZP MK3LP L = 40 mm MK3P MK2KP 66 max. 53 45 max. 41 max. Two 2-dia. holes 3.9 22 max. 4 41 PL15 3 4 789 2 12 1415 (Bottom View) 4.2-dia. hole Two, 3.5 dia. or M3 device mounting holes Two, 3.5 dia. or M3 Socket mounting holes MM3XP MM4(X)P MM3(X)KP MM4(X)KP

Products Related to Common Sockets and DIN Tracks Note: When mounting, pay due attention to the direction of the key groove of applicable Relays. Accessories for DIN Track Mounting (Order Separately) (Unit: mm) Note: 1. Order the above products in multiples of 10. 2. The Tracks conform to DIN standards. Dimensions Terminal Arrangement/ Internal Connections Mounting hole and PCB dimensions (bottom view) 4Two, 3.5-dia. holes 31 max. 36.5 max. 46.5 max. 3.9 23 max. Two, 2 dia. PL20 12 10 8 (Bottom View) 56±0.2 Two, 4.5-dia. Relay mounting holes Two, 4-dia. Socket mounting holes 33-dia. hole ±0.2 * Relay mounting holes are not required for the LDNP. 35±0.3 7.3±0.15 27±0.15 4.5 15 25 25 10 15 (5)* 1025 25 *Dimensions in parentheses are for the PFP-50N.1,000 (500)* DIN Tracks PFP-100N PFP-50N Model PFP-100N PFP-50N 15 25 25 1,000 4.5 25 25 1510 1 24 27 35±0.3 1.5 29.2 DIN Track PFP-100N2 Model PFP-100N2 4.8 1.3 35.5 35.3 1.8 1.8 6.2 M4 screw and washer 11.5 M4×8 panhead screw End Plate PFP-M Model PFP-M 44.3 34.8 16.5 Spacer PFP-S Model PFP-S

Products Related to Common Sockets and DIN Tracks Features of Screwless Sockets Safety Precautions  Do not move the screwdriver up, down, or from side to side or rotate it while it is inserted in the hole. Doing so may damage internal components in the Socket.  Do not insert more than one wire into the same hole. Doing so may cause abnormal heating.  There are two internally connected wiring holes for each terminal.  Insert the screwdriver along the hole wall as shown below.  When you remove a Socket from a support rail, insert the end of a screwdriver into the fixture and move the driver as shown by the arrow in the following figure.  When you use a Release Lever to remove a Relay from a P2RF-@@-S Socket, insert a screwdriver at the location shown in the following figure and move the Release Lever in the direction indicated by the arrow to release the lock on the release lever. Precautions for Safe Use Complete Wiring in Three StepsStructured for Easy Wiring Insert a screwdriver. Screwdriver inserted. Insert the wire. Remove screwdriver to complete wiring.  A spring holds the wire in place to reduce wiring work by 30% (according to OMRON comparison) and eliminates the need to manage torque.  DIN terminal numbers also indicated. Contact terminal (common) Coil terminals Release Lever (sold separately) Nameplate (sold separately) Contact terminal (NO) Contact terminal (NC) Screwdriver Screwdriver Fixture rail

Products Related to Common Sockets and DIN Tracks Wiring Tools Applicable Screwdriver Use a flat-blade screwdriver with a tip that is 2.5 mm wide (3.0 mm max.). Applicable Screwdriver (Example) VESSEL No.9900 − (−) 2.5 × 75 Applicable Wires  You can use either solid wires or stranded wires. Applicable wire size: 0.2 to 1.5 mm2 (AWG24 to AWG16)  Strip 8 to 9 mm of insulation from the ends of the wires.  If you insert stranded wires without ferrules, make sure that the wires are twisted when you insert them.  If you use bare ferrules, always attach insulating sleeves.  If you insert a wire with a sheath outer diameter of 2.2 mm or less, do not insert the wire far enough so that the sheath is engaged inside the hole, as shown below.  Two wires with a sheath outer diameter of 3.2 mm or larger cannot be inserted for the same terminal at the same time.  Use heat-shrinking tubes to indicate wire numbers. Precautions for Correct Use 2.5 mm (3.0 mm max. ) You cannot use a screwdriver with a thick shaft. 8 to 9 mm

Products Related to Common Sockets and DIN Tracks Wiring (1) Insert a screwdriver into a screwdriver insertion hole on the Socket. (2) Press the screwdriver in until it reaches the stopper inside the Socket. The spring at the back of the wire insertion hole will be complete open in this condition. The screwdriver will be held in place even if you remove your hand. (3) With the screwdriver held in place, insert the wire or ferrule into the wire insertion hole. (4) Remove the screwdriver. The spring will hold the wire. This concludes the connection procedure. 12 11 10 9 41 31 21 11 Wire insertion holes Screwdriver insertion hole Wire insertion hole Screwdriver insertion hole Screwdriver Cross-section A-A Spring Wire

Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2017.4 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2017 All Right Reserved.