PTD90_V01 BOURNS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

■ Carbon element ■ Ganging up to 8 sections available ■ Knurled and fl atted shaft styles ■ Audio taper option ■ Tracking error within 3 dB ■ RoHS compliant* PTD90 Series - 9 mm Multi-Ganged Potentiometer *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications.

Electrical Characteristics

Total Resistance Tolerance Maximum Operating Voltage Rated Power Insulation Resistance @ 250 VDC Dielectric Withstanding Voltage Environmental Characteristics Operating Temperature Mechanical Characteristics Soldering Condition Manual Soldering or no-clean rosin cored wire 270 °C max. for 3 seconds Wave Soldering with no-clean fl ux 260 °C max. for 5 seconds and one mounting nut supplied per potentiometer Product Dimensions Derating Curve Ambient Temperature (°C) 20 40 50 60 70 80 90 1003010 100 Rating Power Ratio (%) PTD901 M7XP0.75 7.05 ± 0.5 (.278 ± .020) 0.8 ± 0.2 (.031 ± .008) 5.0 (.197) MOUNTING SURFACE RECOMMENDED PCB LAYOUT SCHEMATIC 1.0 +0.2/-0 (.039 +.008/-0) DIA. HOLES 3 PLCS. 5.0 (.197) 5.0 (.197) 1R1 0.3 (.012) 0.7 (.028) PTD902 M7XP0.75 R1R2 9.65 ± 0.5 (.380 ± .020) 0.8 ± 0.2 (.031 ± .008) 2.5 (.098) 2.5 (.098) 5.0 (.197) MOUNTING SURFACE RECOMMENDED PCB LAYOUT 1.0 +0.2/-0 (.039 +.008/-0) DIA. HOLES 6 PLCS. 5.0 (.197) 5.0 (.197) SCHEMATIC 1R1 1'R2 0.3 (.012) 2 PLCS. 2 PLCS. 0.7 (.028) DIMENSIONS: MM (INCHES) *RoHS COMPLIANT Standard Resistance Table Resistance Resistance (Ohms) Code 1,000 102 2,000 202 5,000 502 10,000 103 20,000 203 50,000 503 100,000 104 200,000 204 500,000 504 1,000,000 105

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. PTD90 Series - 9 mm Multi-Ganged Potentiometer Product Dimensions DIMENSIONS: MM (INCHES) PTD904 M7XP0.75 R1R2R3R4 R1R2R3R4 17.2 ± 0.5 (.677 ± .020) 0.8 ± 0.2 (.031 ± .008) 5.0 (.197) MOUNTING SURFACE RECOMMENDED PCB LAYOUT 1.0 +0.2/-0 (.039 +.008/-0) DIA. HOLES 12 PLCS. 5.0 (.197) 5.0 (.197) 2.5 (.098) 5.0 (.197) 2.5 (.098) 2.5 (.098) 2.5 (.098) 5.0 (.197) SCHEMATIC R4 R3 R2 R1 PTD906 M7XP0.75 R1R2R3R4R5R6 R1R2R3R4 24.7 ± 0.5 (.972 ± .020) 0.8 ± 0.2 (.031 ± .008) 5.0 (.197) MOUNTING SURFACE RECOMMENDED PCB LAYOUT 1.0 +0.2/-0 (.039 +.008/-0) DIA. HOLES 18 PLCS. 5.0 (.197) 5.0 (.197)5.0 (.197) 2.5 (.098)5.0 (.197)2.5 (.098) 5.0 (.197) 2.5 (.098) 2.5 (.098) R5R6 2.5 (.098) 2.5 (.098) 5.0 (.197) SCHEMATIC R4 R3 R6 R5 R2 R1 PTD908 M7XP0.75R1R2R3R4R5R6R7R8 R1R2R3R4 32.2 ± 0.5 (1.268 ± .020) 0.8 ± 0.2 (.031 ± .008) 5.0 (.197) MOUNTING SURFACE RECOMMENDED PCB LAYOUT 1.0 +0.2/-0 (.039 +.008/-0) DIA. HOLES 24 PLCS. 5.0 (.197) 5.0 (.197) 5.0 (.197) 5.0 (.197) 2.5 (.098)5.0 (.197)2.5 (.098) 5.0 (.197) 5.0 (.197) 2.5 (.098) 2.5 (.098) 2.5 (.098) R5R6R7R8 2.5 (.098)2.5 (.098) 2.5 (.098) 5.0 (.197) 333 11111111 2 2 2 2 2222 3333 SCHEMATIC R4 R3 R6 R5 R8 R7 R2 R1

Applications

■ Audio/TV sets ■ Automotive sound systems ■ Amplifi ers/mixers/drum machines/synthesizers/DJ equipment ■ Multimedia sound systems ■ Portable electronics

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. PTD90 Series - 9 mm Multi-Ganged Potentiometer Product Dimensions REV. 12/14 DIMENSIONS: MM (INCHES) SHAFT STYLE "K" A B

18 TEETH

1.0 (.039) 6.0 +0/-0.1 (.236 +0/-.004) DIA. L ± (.591)L 1.5 (.059) 0.5 (.020) (.787) (.984) (.197)B 7 (.276) (.394) (.236)A 10 (.394) (.472) 30 ° 9.5 ± 0.3 (.374 ± .012) 6.0 (.236) 4.8 ± 0.3 (.189 ± .012) 6.5 ± 0.3 (.256 ± .012) 3.5 (.138) 0.8 (.031) 5.0 (.197) 0.8 (.031) 2.0 (.079) SHAFT SHOWN IN CCW POSITION SHAFT STYLE "F" B 4.5 (.177) 6.0 +0/-0.1 (.236 +0/-.004) DIA. F L ± 0.5 (.020) (.591)L 20 (.787) (.984) (.197)B 7 (.276) (.394) (.276)F 12 (.472) (.472) 9.5 ± 0.3 (.374 ± .012) 6.0 (.236) 4.8 ± 0.3 (.189 ± .012) 6.5 ± 0.3 (.256 ± .012) 3.5 (.138) 0.8 (.031) 5.0 (.197) 0.8 (.031) 2.0 (.079) SHAFT SHOWN IN CCW POSITION 60 ° 4.5 (.177) How To Order PTD90 1 - 2 0 20 K - B 203 Model

  • PTD90 = No Switch No. of Sections
  • 1 = 1 Section
  • 2 = 2 Sections
  • 3 = 3 Sections
  • 4 = 4 Sections
  • 5 = 5 Sections
  • 6 = 6 Sections
  • 8 = 8 Sections Pin Style
  • 1 = PC Pins vertical/ down facing and ±10 % Total Resistance Tolerance
  • 2 = PC Pins vertical/ down facing and ±20 % Total Resistance Tolerance Center Detent Option
  • 0 = No Detent
  • 2 = Center Detent Standard Shaft Length
  • 15 = 15 mm
  • 20 = 20 mm
  • 25 = 25 mm Shaft Styles
  • K = Knurled Type Shaft (Metal)

18 Toothed Serration Type

  • F = Flatted Metal Shaft Resistance Taper (See Taper Charts) Taper Series followed by Curve Number Resistance Code (See Table) Other shaft styles available. 01 0 100 100 A Series Tapers Terminal 1-2 Output Voltage Terminal 1-3 Input Voltage X 100 (%) Rotational Travel (%) (05A): A1 (10A): A2 (15A): A ): A6 01 0 100 100 B Series Tapers Terminal 1-2 Output Voltage Terminal 1-3 Input Voltage X 100 (%) Rotational Travel (%) (5B): B5 (B): B (1B): B1 (2B): B2 (2B): B2 (3B): B3 (4B): B4 01 0 100 100 C Series Tapers Terminal 1-2 Output Voltage Terminal 1-3 Input Voltage X 100 (%) Rotational Travel (%) (30C ): C (05C): C (10C): C2 (15C): C (25C): C 5(20C): C Tapers