PTD08A006WAD

PTD08A006W TI1 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

www.ti.com SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 6-A,4.75-VTO14-V,NON-ISOLATED, DIGITALPOWERTRAIN™ MODULE Check forSamples: PTD08A006W 1FEATURES APPLICATIONS

• DigitalPower Systems2• Up to6-A Output Current using UCD9XXX DigitalControllers• 4.75-Vto14-V InputVoltage
• Programmable Wide-Output Voltage (0.7V to3.6V)
• Efficienciesup to96%
• DigitalI/O – PWM signal – INHIBIT – Currentlimitflag(FAULT) – Sychronous RectifierEnable (SRE)
• Analog I/O – Temperature – Output currrent
• SafetyAgency Approvals:(Pending) – UL/IEC/CSA-C22.260950-1
• OperatingTemperature:–40°C to85°C

DESCRIPTION

The PTD08A006W isa high-performance6-A rated,non-isolateddigitalPowerTrainmodule.Thismodule isthe power conversionsectionofa digitalpower system which incorporatesTI's UCD7230 MOSFET driverIC.The PTD08A006W must be used inconjunctionwitha digitalpower controllersuch as theUCD9240 or UCD9110 family.The PTD08A006W receivescontrolsignalsfromthedigitalcontrollerand providesparametricand status informationback to the digitalcontroller.Together,PowerTrainmodules and a digitalpower controllerform a sophisticated,robust,and easilyconfiguredpower management solution. Operatingfrom an inputvoltagerange of 4.75 V to 14 V, the PTD08A006W providesstep-down power conversionto a wide range of outputvoltagesfrom,0.7 V to 3.6 V. The wide inputvoltagerange makes the PTD08A006W particularlysuitablefor advanced computing and serverapplicationsthatutilizea loosely regulated8-V,9.6-Vor 12-V intermediatedistributionbus.Additionally,thewide inputvoltagerange increases designflexibilityby supportingoperationwithtightlyregulated5-V or12-V intermediatebus architectures. The module incorporatesoutputover-currentand temperaturemonitoringwhichprotectsagainstmost loadfaults. Output currentand module temperaturesignalsare providedforthe digitalcontrollerto permituser defined over-currentand over-temperaturewarningand faultscerarios. The module uses double-sidedsurfacemount constructionto providea low profileand compact footprint. Package optionsincludeboththrough-holeand surfacemount configurationsthatarelead(Pb)-freeand RoHS compatible. Pleasebe aware thatan importantnoticeconcerningavailability,standardwarranty,and use incriticalapplicationsofTexas Instrumentssemiconductorproductsand disclaimerstheretoappearsattheend ofthisdatasheet. 2POWERTRAIN isa trademarkofTexas Instruments. PRODUCTION DATA informationiscurrentas ofpublicationdate. Copyright© 2009–2010,Texas InstrumentsIncorporatedProductsconform to specificationsper the terms of the Texas Instrumentsstandardwarranty.Productionprocessingdoes not necessarilyincludetestingofallparameters.

(Recommended) VO VO 4 AGND 75 6 IOUTTEMP GND GND PTD08A006 VI INH VBIAS CI2 22 /c109F (Optional) L O A D GND VI GND CO1 47 /c109F (Optional) FAULT SRE PWM CI1 330 /c109F (Recommended) Digital Lines To/From Digital Controller Analog Lines To Digital Controller UDG-08115 PTD08A006W SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 www.ti.com This integratedcircuitcan be damaged by ESD. Texas Instrumentsrecommends thatallintegratedcircuitsbe handled with appropriateprecautions.Failuretoobserveproperhandlingand installationprocedurescan cause damage. ESD damage can rangefromsubtleperformancedegradationtocompletedevicefailure.Precisionintegratedcircuitsmay be more susceptibletodamage because verysmallparametricchanges couldcause thedevicenottomeet itspublishedspecifications. Standard PTD08A006W Application A. C I2and C O1 areoptionalwhen theoperatingfrequencyisgreaterthan500 kHz.

2 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ProductFolderLink(s):PTD08A006W

www.ti.com SLTS292A –JUNE 2009–REVISED FEBRUARY 2010

ORDERING INFORMATION

For themost currentpackage and orderinginformation,see thePackage Option Addendum attheend ofthisdatasheet,or see theTIwebsiteatwww.ti.com. DATASHEET TABLE OF CONTENTS DATASHEET SECTION PAGE NUMBER ENVIRONMENTAL AND ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL CHARACTERISTICS TABLE 4 TERMINAL FUNCTIONS 5 TYPICAL CHARACTERISTICS (VI= 12V) 6 TYPICAL CHARACTERISTICS (VI= 5V) 8 TYPICAL APPLICATION SCHEMATIC 10 GRAPHICAL USER INTERFACE VALUES 11 SHIPPING TRAY DRAWINGS 12 ENVIRONMENTAL AND ABSOLUTE MAXIMUM RATINGS (VoltagesarewithrespecttoGND) UNIT VI Inputvoltage 16 V VB Biasvoltage 16 V TA Operatingtemperaturerange Over VIrange –40 to85 Surfacetemperatureofmodule body orpinsTwave Wave solderingtemperature suffixAD 260 °Cfor5 secondsmaximum Tstg Storagetemperature –55 to125(1) Per Mil-STD-883D,Method 2002.3,1 msec, suffixAD 200Mechanicalshock 1/2sine,mounted G Mechanicalvibration Mil-STD-883D,Method 2007.2,20-2000Hz 15 Weight 3.9 grams MTBF Reliability Per TelcordiaSR-332,50% stress,TA = 40°C, groundbenign 9.4 106 Hr Flammability Meets UL94V-O (1) The shippingtrayortapeand reelcannotbe used tobake partsattemperatureshigherthan65°C. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLink(s):PTD08A006W

SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 www.ti.com

ELECTRICAL CHARACTERISTICS

TA= 25°C, FSW = 350kHz,VI= 12 V,VO = 3.3V,VB= VI,C I1= 330 µF,C I2= 22 µF ceramic,C O1 = 47 µF ceramic,C O2 = 330 µF, and IO = IO(max) (unlessotherwisestated) PARAMETER TEST CONDITIONS PTD08A006W UNIT MIN TYP MAX IO Outputcurrent Over VO range 25°C, naturalconvection 0 6 A VI Inputvoltagerange Over IO range 4.75 14(1) V VOADJ Outputvoltageadjustrange Over IO range 0.7(1) 3.6 V VO = 3.3V 95% VO = 2.5V 92% VI= VB = 5 V VO = 1.8V 89% h Efficiency IO = 6 A, VO = 1.5V 88%fs = 350 kHz VO = 1.2V 86% VO = 1.0V 84% VOPP VO Ripple(peak-to-peak) 20-MHz bandwidth 20 mV PP VB Biasvoltage 4.75 14 V Inhibit(pin8)toAGND Standby 4 IB Biascurrent mA Switching 34 VIH High-levelinputvoltage 2.0 5.5 SRE, INH,& PWM inputlevels V VIL Low-levelinputvoltage 0.8 Frequencyrange 300 1000 kHz PWM input Pulsewidthlimits 130 ns Range -40 125 °C Accuracy,-40°C ≤ TA ≤ 85°C -4 6 °C TEMP output Slope 10 mV/°C Offset,TA = 0°C 500 mV VOH High-leveloutputvoltage,IFAULT = 4mA 2.7 3.3 V VOL FAULT output Low-leveloutputvoltage,IFAULT = 4mA 0 0.6 ILIM Overcurrentthreshold;Reset,followedby auto-recovery 14 A Range 0.15 3.5 V Gain 130 190 250 mV/A IOUT output Offset,IO = 0A,VO = 1.2V 0.44 0.6 0.76 V OutputImpedance 10 15 21 kΩ Nonceramic 330 (2) C I Externalinputcapacitance µF Ceramic 22 (2) Nonceramic 330 (3) 5000(4) CapacitanceValue µF C O Externaloutputcapacitance Ceramic 47 (3) (3) Equivalentseriesresistance(non-ceramic) 1(5) m Ω (1) The maximum inputvoltageisdutycyclelimitedto(VO /(130ns× FSW ))or14 V,whicheverisless.The maximum allowableinputvoltage isa functionofswitchingfrequency. (2) A 22 µF ceramicinputcapacitorisrequiredforproperoperation.An additional330 µF bulkcapacitorratedfora minimum of500mA rms ofripplecurrentisrecommended. When operatingatfrequencies> 500kHz the22 µF ceramiccapacitorisonlyrecommended. Referto theUCD9240 controllerdatasheetand userinterfaceforapplicationspecificcapacitorspecifications. (3) A 47 µF ceramicoutputcapacitorisrequiredforbasicoperation.An additional330 µF bulkcapacitorisrecommended forimproved transientresponse.When operatingatfrequencies> 500kHz the47 µF ceramiccapacitorisonlyrecommended. RefertotheUCD9240 controllerdatasheetand userinterfaceforapplicationspecificcapacitorspecifications. (4) 5,000µF isthecalculatedmaximum outputcapacitancegivena 1V/msec outputvoltagerisetime.Additionalcapacitanceorincreasing theoutputvoltageriseratemay triggertheovercurrentthresholdatstart-up.RefertotheUCD9240 controllerdatasheetand user interfaceforapplicationspecificcapacitorspecifications. (5) Thisistheminimum ESR forallnon-ceramicoutputcapacitance.RefertotheUCD9240 controllerdatasheetand userinterfacefor applicationspecificcapacitorspecifications.

4 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ProductFolderLink(s):PTD08A006W

(Top View) Texas Instruments PTD08A006W www.ti.com SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 TERMINAL FUNCTIONS TERMINAL NAME NO. VI 1 The positiveinputvoltagepower node tothemodule,whichisreferencedtocommon GND. GND Thisisthecommon groundconnectionfortheVIand VO power connections. VO 4 The regulatedpositivepower outputwithrespecttoGND. TEMP 5 Temperaturesense output.The voltagelevelon thispinrepresentsthetemperatureofthemodule. IOUT 6 Currentsense output.The voltagelevelon thispinrepresentstheaverageoutputcurrentofthemodule. AGND 7 Analoggroundreturn.Itisthe0 Vdc referenceforthecontrolinputs. The inhibitpinisa negativelogicinputthatisreferencedtoAGND. Applyinga low-levelsignaltothispindisablestheINH (1) 8 module and turnsofftheoutputvoltage.A 10 kΩ pull-upto3.3V or5 V isrequirediftheINH signalisnotused. Currentlimitflag.The Faultsignalisa 3.3V digitaloutputwhichislatchedhighafteran over-currentcondition.TheFAULT 9 Faultisresetaftertwo completePWM cycleswithoutan over-currentcondition(thirdrisingedge ofthePWM). SynchronousRectifierEnable.Thispinisa highimpedance digitalinput.A 3.3V or5 V logiclevelsignalsisused to SRE 10 enablethesynchronousrectifierswitch.When thissignalishigh,themodule willsourceand sinkoutputcurrent.When thissignalislow,themodule willonlysourcecurrent. PWM 11 ThisisthePWM inputpin.Itisa highimpedance digitalinputthataccepts3.3V or5 V logiclevelsignalsup to1 MHz. VBIAS 12 Biasvoltagesupplyrequiredtopower internalcircuitry.ForoptimalperformanceconnectVBIAS toVI. (1) Denotesnegativelogic:High= Normal operation,Low = Functionactive Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLink(s):PTD08A006W

fSW = 350 kHz 3.3 V 2.5 V 1.8 V 1.2 V 0.8 V 3.3V 2.5V 1.8V 1.2V 0.8V VO /c104– Efficiency – % 0 64321 IO – Ouput Current – A 0 64321 IO – Ouput Current – A 100 /c104– Efficiency – % 3.3 V 2.5 V 1.8 V 1.2 V 0.8 V 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 500 kHz 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 750 kHz 100 /c104– Efficiency – % 3.3 V 2.5 V 1.8 V 1.2 V 0.8 V 0 64321 IO – Ouput Current – A 3.3V 2.5V 1.8V 1.2V 0.8V VO 3.3 V 2.5 V 1.8 V 1.2 V 0.8 V fSW = 1 MHz 100 /c104– Efficiency – % 0 64321 IO – Ouput Current – A 0 65431 fSW = 350 kHz 3.3V 2.5V 1.8V 1.2V 0.8V VO IO – Ouput Current – A 1.0 0.5 1.5 2.5 3.3 V 2.5 V 1.8 V 1.2 V 0.8 V PD – Power Dissipation – W 2.0 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 500 kHz 3.3 V 2.5 V 1.8 V 1.2 V 0.8 V 0 65431 IO – Ouput Current – A 1.0 0.5 1.5 2.5 PD – Power Dissipation – W 2.0 1000900700600400 fSW – Switching Frequency – kHz 300 IBIAS – Input Bias Current – mA 500 800 VI = 12 V 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 750 kHz 3.3 V 2.5 V 1.8 V 1.2 V 0.8 V 0 65431 IO – Ouput Current – A 1.0 0.5 1.5 2.5 PD – Power Dissipation – W 2.0 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 1 MHz 1.2 V 0.8 V 3.3 V 2.5 V 1.8 V 0 65431 IO – Ouput Current – A 1.0 0.5 1.5 2.5 PD – Power Dissipation – W 2.0 PTD08A006W SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 www.ti.com TYPICAL CHARACTERISTICS (VI = 12 V) (1) EFFICIENCY vs EFFICIENCY vs EFFICIENCY vs LOAD CURRENT LOAD CURRENT LOAD CURRENT Figure1. Figure2. Figure3. EFFICIENCY vs POWER DISSIPATION vs POWER DISSIPATION vs LOAD CURRENT LOAD CURRENT LOAD CURRENT Figure4. Figure5. Figure6. POWER DISSIPATION vs POWER DISSIPATION vs INPUT BIAS CURRENT vs LOAD CURRENT LOAD CURRENT SWITCHING FREQUENCY Figure7. Figure8. Figure9. (1) The electricalcharacteristicdatahas been developedfromactualproductstestedat25°C. Thisdataisconsideredtypicalforthe converter.

6 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ProductFolderLink(s):PTD08A006W

TA – Ambient Temperature – °C fSW = 350 kHz VO = 3.3 V Natural Convection 0 65431 IO – Ouput Current – A TA – Ambient Temperature – °C fSW = 500 kHz VO = 3.3 V 0 65431 IO – Ouput Current – A Natural Convection TA – Ambient Temperature – °C fSW = 350 kHz VO = 1.2 V 0 65431 IO – Ouput Current – A Natural Convection TA – Ambient Temperature – °C fSW = 500 kHz VO = 1.2 V 0 65431 IO – Ouput Current – A Natural Convection TA – Ambient Temperature – °C fSW = 750 kHz VO = 1.2 V 100LFM Nat conv

100 LFM

IO – Ouput Current – A Natural Convection PTD08A006W www.ti.com SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 TYPICAL CHARACTERISTICS (VI = 12 V) Safe OperatingArea (1) AMBIENT TEMPERATURE vs AMBIENT TEMPERATURE vs AMBIENT TEMPERATURE vs LOAD CURRENT LOAD CURRENT LOAD CURRENT Figure10. Figure11. Figure12. AMBIENT TEMPERATURE vs AMBIENT TEMPERATURE vs LOAD CURRENT LOAD CURRENT Figure13. Figure14. (1) The temperaturederatingcurvesrepresenttheconditionsatwhichinternalcomponents areatorbelowthemanufacturer's maximum operatingtemperatures.Deratinglimitsapplytomodules soldereddirectlytoa 100 mm x 100 mm double-sidedPCB with2 oz.copper. Forsurfacemount packages(AS and AZ suffix),multipleviasmust be utilized.Pleaserefertothemechanicalspecificationformore information. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLink(s):PTD08A006W

fSW = 350 kHz 3.3 V 2.5 V 1.8 V 1.2 V 0.8 V 3.3V 2.5V 1.8V 1.2V 0.8V VO IO – Ouput Current – A 100 /c104– Efficiency – % 0 65431 IO – Ouput Current – A 3.3 V 2.5 V 1.8 V 1.2 V 0.8 V 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 500 kHz 100 /c104– Efficiency – % 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 750 kHz 100 /c104– Efficiency – % 3.3 V 1.8 V 1.2 V 0.8 V 0 65431 IO – Ouput Current – A 2.5 V 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 1 MHz 100 /c104– Efficiency – % 3.3 V 2.5 V 1.2 V 0.8 V 0 65431 IO – Ouput Current – A 1.8 V 0 65431 fSW = 350 kHz 3.3V 2.5V 1.8V 1.2V 0.8V VO IO – Ouput Current – A 0.50 1.00 1.50 0.8 V PD – Power Dissipation – W 0.25 0.75 1.25 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 500 kHz 0.8 V 2.5 V 1.2 V 1.8 V 3.3 V 0 65431 IO – Ouput Current – A 0.50 1.00 1.50PD – Power Dissipation – W 0.25 0.75 1.25 1000900700600400 fSW – Switching Frequency – kHz 300 IBIAS – Input Bias Current – mA 500 800 VI = 5 V 0 65431 IO – Ouput Current – A 0.50 1.00 1.50PD – Power Dissipation – W 0.25 0.75 1.25 0.8 V 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 750 kHz 3.3V 2.5V 1.8V 1.2V 0.8V VO fSW = 1 MHz 0 65431 IO – Ouput Current – A 0.50 1.00 1.50PD – Power Dissipation – W 0.25 0.75 1.25 PTD08A006W SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 www.ti.com TYPICAL CHARACTERISTICS (VI = 5 V) (1) EFFICIENCY vs EFFICIENCY vs EFFICIENCY vs LOAD CURRENT LOAD CURRENT LOAD CURRENT Figure15. Figure16. Figure17. EFFICIENCY vs POWER DISSIPATION vs POWER DISSIPATION vs LOAD CURRENT LOAD CURRENT LOAD CURRENT Figure18. Figure19. Figure20. POWER DISSIPATION vs POWER DISSIPATION vs INPUT BIAS CURRENT vs LOAD CURRENT LOAD CURRENT SWITCHING FREQUENCY Figure21. Figure22. Figure23. (1) The electricalcharacteristicdatahas been developedfromactualproductstestedat25°C. Thisdataisconsideredtypicalforthe converter.

8 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ProductFolderLink(s):PTD08A006W

TA – Ambient Temperature – °C Nat Conv Nat conv fSW = 350 kHz VO = 3.3 V 0 65431 IO – Ouput Current – A TA – Ambient Temperature – °C Nat Conv fSW = 500 kHz VO = 3.3 V Nat conv 0 65431 IO – Ouput Current – A TA – Ambient Temperature – °C Nat Conv Nat conv fSW = 500 kHz VO = 1.2 V 0 65431 IO – Ouput Current – A TA – Ambient Temperature – °C fSW = 750 kHz VO = 1.2 V 0 65431 IO – Ouput Current – A Natural Convection Nat conv PTD08A006W www.ti.com SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 TYPICAL CHARACTERISTICS (VI = 5 V) Safe OperatingArea (1) AMBIENT TEMPERATURE vs AMBIENT TEMPERATURE vs AMBIENT TEMPERATURE vs LOAD CURRENT LOAD CURRENT LOAD CURRENT Figure24. Figure25. Figure26. AMBIENT TEMPERATURE vs LOAD CURRENT Figure27. (1) The temperaturederatingcurvesrepresenttheconditionsatwhichinternalcomponents areatorbelowthemanufacturer's maximum operatingtemperatures.Deratinglimitsapplytomodules soldereddirectlytoa 100 mm x 100 mm double-sidedPCB with2 oz.copper. Forsurfacemount packages(AS and AZ suffix),multipleviasmust be utilized.Pleaserefertothemechanicalspecificationformore information. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 9 ProductFolderLink(s):PTD08A006W

–Vsens-rail3 10 k/c87 0.1 /c109F FCX491A +3.3 V UCD9240RGC EAp1 EAn2 EAp2 EAn1 EAn4 EAp4 EAn3 EAp3 AddrSens1 AddrSens0 CS-1A(COMP1) CS-2A(COMP2) CS-2B CS-1B CS-4A(COMP4) CS-3A(COMP3) +Vsens-rail1 –Vsens-rail2 +Vsens-rail2 –Vsens-rail1 –Vsens-rail4 +Vsens-rail4 +Vsens-rail3 CS-rail2B CS-rail1A CS-rail4A CS-rail3A CS-rail2A CS-rail1B Temp Vtrack Vin/Iin PMBus-Data PMBus-Clk PowerGood (TMS) PMBus-Ctrl PMBus-Alert +3.3 V 52V33FB V33A V33D V33DIO-1 V33DIO-2 BPCap 4.7 /c109F DPWM-1A 15 k/c87 0.1 /c109F FAN-Tach36

41 FAN-PWM

9 RESET

+3.3 V PTD08A010W FAULT PWM SRE INH IOUT PTD08A010W FAULT PWM SRE INH IOUT Commutation UCD7230 Driver Logic FAULT PWM SRE INH IOUT Temp Sensor PTD08A020W Temp-rail1A INH +3.3 V VIN VO PTD08A020W FAULT PWM SRE INH IOUT Temp-rail1B CS-rail1A +Vsens-rail1 –Vsens-rail1 Temp-rail2A Temp-rail2B +Vsens-rail2 –Vsens-rail2 CS-rail1B CS-rail2A CS-rail2B PTD08A010W FAULT PWM SRE INH IOUT PTD08A010W FAULT PWM SRE INH IOUT Temp-rail3A Temp-rail4A +Vsens-rail4 –Vsens-rail4 CS-rail3A CS-rail4A +Vsens-rail3 –Vsens-rail3 82.5 k/c87 TEMP VOUT GND VBIAS TEMP GND TEMP VOUT GND TEMP VOUT GND TEMP VOUT GND TEMP VOUT GND VBIAS VIN VIN VBIAS VIN VIN VBIAS VIN VIN VBIAS VIN VIN VBIAS VIN VIN [A] UDG-08035 PTD08A006W SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 www.ti.com

APPLICATION INFORMATION

Figure28. TypicalApplicationSchematic Figure28 shows theUCD9240 power supplycontrollerworkingina system whichrequirestheregulationoffour independentpower supplies.The loopforeach power supplyiscreatedby therespectivevoltageoutputsfeeding intotheErrorADC differentialinputs,and completedby DPWM outputsfeedingintotheUCD7230 driverswhich areshown on thePTD08A0x0W modules.

10 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ProductFolderLink(s):PTD08A006W

www.ti.com SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 UCD9240 GraphicalUser Interface(GUI) When usingthe UCD9240 digitalcontrolleralong withdigitalPowerTrainmodules to designa digitalpower system,severalinternalparametersofthemodules are requiredtorun theFusionDigitalPower DesignerGUI. See theplantparametersbelowforthePTD08A006W digitalPowerTrainmodules. Table1.PTD08A006W PlantParameters PTD08A006W PlantParameters L (µH) DCR (mΩ) Rds-on-hi(mΩ) Rds-on-lo(mΩ) 0.90 2.2 3.6 3.6 Internaloutputcapacitanceispresenton the digitalPowerTrainmodules themselves.When usingthe GUI interfacethiscapacitanceinformationmust be includedalongwithany additionalexternalcapacitance.See the capacitorparametersbelowforthePTD08A006W digitalPowerTrainmodules. Table2.PTD08A006W CapacitorParameters PTD08A006W CapacitorParameters C (µF) ESR (mΩ) ESL (nH) Quantity 47 1.5 2.5 1 Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 11 ProductFolderLink(s):PTD08A006W

SLTS292A –JUNE 2009–REVISED FEBRUARY 2010 www.ti.com TRAY

12 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ProductFolderLink(s):PTD08A006W

www.ti.com 3-Dec-2010 Addendum-Page 1 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) PTD08A006WAD ACTIVE Through- Hole Module EGS 12 36 Pb-Free (RoHS) SN Level-1-235C-UNLIM/ Level-3-260C-168HRS Request Free Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DLP® Products www.dlp.com Communications and www.ti.com/communications Telecom DSP dsp.ti.com Computers and www.ti.com/computers Peripherals Clocks and Timers www.ti.com/clocks Consumer Electronics www.ti.com/consumer-apps Interface interface.ti.com Energy www.ti.com/energy Logic logic.ti.com Industrial www.ti.com/industrial Power Mgmt power.ti.com Medical www.ti.com/medical Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Space, Avionics & www.ti.com/space-avionics-defense Defense RF/IF and ZigBee® Solutionswww.ti.com/lprf Video and Imaging www.ti.com/video Wireless www.ti.com/wireless-apps Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2010, Texas Instruments Incorporated