PT78SR109S

PT79SR100 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

For assistance or to order, call (800) 531-5782 Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.powertrends.com22 Application Notes Mechanical Outline Product Selector Guide Revised 5/15/98 PT79SR100 Series -1.5 AMP NEGATIVE STEP-DOWN INTEGRATED SWITCHING REGULATOR

• High Efficiency > 85%
• Self-Contained Inductor
• Short Circuit Protection
• Over-T emperature Protection The PT79SR100 Series is a new line of Negative Input/Negative Out- put 3-terminal Integrated Switching Regulators (ISRs). These ISRs have a maximum output current of -1.5 Amps and an output voltage that is laser trimmed to most industry standard volt- ages. They have excellent line and load regulation, and are ideal for applications, such as RS232 and Ethernet communica- tions, ECL logic, and op-amp circuitry. PT79SR1 COMCOM -Vin C1 1 C2D1 -Vout Pin-Out Information Pin Function

1 GND

Ordering Information

05 = -5.0 Volts 52 = -5.2 Volts 08 = -8.0 Volts 09 = -9.0 Volts 12 = -12.0 Volts 15 = -15.0 Volts Package Suffix V = Vertical Mount S = Surface Mount H = Horizontal Mount Standard Application C1 = Optional ceramic (1µF) C2 = Optional ceramic (1-5µF) D1 = Zener diode required to clamp turn-on overshoot (See Application Note) Specifications Characteristics PT79SR100 SERIES (Ta = 25°C unless noted) Symbols Conditions Min Typ Max Units Output Current I o Over Vin range -0.1* — -1.5 A Short Circuit Current I sc Vin=Vo-4V — -3.5 — Apk Input Voltage Range V in Io=-0.1 to -1.5 A V o=-5V -9 — -30 V Output Voltage Tolerance DVo Over Vin range, Io=-1.5 A — ±1.0 ±3.0 %V oTa=-20°C to shutdown Line Regulation Reg line Over Vin range — ±1.0 ±2.0 %V o Load Regulation Reg load -0.1 £ Io £ -1.5 A — ±0.5 ±1.0 %V o Vo Ripple/Noise V n Vin=-15V, Io=-1.0 A,Vo=-5V — 35 — mV pp Transient Response t tr 50% load change — 100 — µSec Vo=overshoot/undershoot — 30 — %V o Efficiency h Vin=-10V, Io=-1.0A, Vo=-5V — 85 — % Switching Frequency ƒ o Over Vin and Io ranges 0.95 1.0 1.05 MHz Absolute Maximum T a -40 — +85 °COperating T emperature Range Recommended Operating T a Free Air Convection, (40-60LFM) -40 — +60** °CTemperature Range Over V in and Io ranges Thermal Resistance qja Free Air Convection, (40-60LFM) — 45 — °C/W Temperature Coefficient T c Over Vin and Io ranges — ±0.5 ±1.5 mV/°C Storage Temperature T s — -40 — +125 °C Mechanical Shock — Per Mil-STD-883D, Method 2002.3 — 500 — G’s Mechanical Vibration — Per Mil-STD-883D, Method 2007.2, —5 — G’s20-2000 Hz, soldered in a PC board Weight — — — 7.0 — Grams * ISR will operate down to no load with reduced specifications. ** See Thermal Derating chart. Pkg Style 500

For assistance or to order, call (800) 531-5782 Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.powertrends.com 23 Wide Input Range Products DATA SHEETS CHARACTERISTIC DATA PT79SR105, -5.0 VDC (See Note 1) PT79SR112, -12.0 VDC (See Note 1) PT79SR115, -15.0 VDC (See Note 1) Efficiency vs Output Current Efficiency vs Output Current Efficiency vs Output Current Ripple vs Output Current Ripple vs Output Current Ripple vs Output Current Power Dissipation vs Output Current Power Dissipation vs Output Current Power Dissipation vs Output Current Note 1: All data listed in the above graphs, except for derating data, has been developed from actual products tested at 25°C. This data is considered typical data for the ISR. Note 2: Thermal derating graphs are developed in free air convection cooling of 40-60 LFM soldered in a printed circuit board. (See Thermal Application Notes.) Thermal Derating (Ta) (See Note 2) Thermal Derating (Ta) (See Note 2) Thermal Derating (Ta) (See Note 2) PT79SR100 Series Efficiency - %Ripple-(mV)Iout-(Amps)PD-(Watts) Efficiency - %Ripple-(mV)Iout-(Amps)PD-(Watts) Efficiency - %Ripple-(mV)Iout-(Amps)PD-(Watts) Iout-(Amps) Iout-(Amps) Iout-(Amps) Vin-(Volts) Iout-(Amps) Iout-(Amps) Iout-(Amps) Vin-(Volts) Iout-(Amps) Iout-(Amps) Iout-(Amps) Vin-(Volts) 100 10.0V 15.0V 20.0V 25.0V 30.0V Vin 30.0V 25.0V 20.0V 15.0V 10.0V Vin 0.5 1.5 30.0V 25.0V 20.0V 15.0V 10.0V Vin 100 16.0V 20.0V 25.0V 30.0V Vin 0.5 1.5 2.5 30.0V 25.0V 20.0V 16.0V Vin 100 19.0V 21.0V 24.0V 27.0V 30.0V Vin 120 150 30.0V 27.0V 24.0V 21.0V 19.0V Vin 0.2 0.4 0.6 0.8 1.2 1.4 1.6 7 9 11 13 15 17 19 21 23 25 27 29 31 60˚C 70˚C 85˚C 50˚C 0.2 0.4 0.6 0.8 1.2 1.4 1.6 15 17 19 21 23 25 27 29 31 60˚C 70˚C 85˚C 50˚C 0.2 0.4 0.6 0.8 1.2 1.4 1.6 18 20 22 24 26 28 30 60˚C 70˚C 85˚C 50˚C 100 30.0V 25.0V 20.0V 16.0V Vin 0.5 1.5 2.5 30.0V 27.0V 24.0V 21.0V 19.0V Vin

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright  1999, Texas Instruments Incorporated