PT6321 PTC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Fluorescent Display Tube Controller Driver Tel: 886-66296288‧Fax: 886-29174598‧ http://www.princeton.com.tw‧2F, 233-1, Baociao Road, Sindian, Taipei 23145, Taiwan

DESCRIPTION

The PT6321 is a dot matrix fluorescent display tube controller driver IC whic h displays characters, numerics and symbols. Dot matrix fluorescent display tube drive signals are generat ed by serial data sent from a microcontroller. A display system is easily realized by internal ROM and RAM for character display.

FEATURES

  • Logic power supply(V DD): 3.3V±10% / 5.0V±10%
  • Fluorescent display tube drive power supply (V DISP): 20V~60V
  • VFD driver output current (VFD driver output can directly be connected to the fluorescent display tube. No pull-down resistor is required.) - Segment driver (SEG1 to SEG35): -5.0mA DISP=60V) - Segment driver (AD1 to AD4): -10.0mA (VDISP=60V) - Grid driver (COM1 to COM24): -20.0mA (VDISP=60V)
  • General output port output current - Output driver (P1-4): ±1.0mA (VDD=3.3V±10%) ±2.0mA (VDD=5.0V±10%)
  • Content of display - CGROM: 5x7 dots, 240 types (character data) - CGRAM: 5x7 dots, 16 types (character data) - ADRAM: 24 (display digit) x 4 bits (symbol data) - DCRAM: 24 (display digit) x 8 bits (register for character data display) - General output port: 4 bits (static mode)
  • Display control function - Display digit: 9 to 24 digits - Display duty (contrast adjustment): 8 stages - All lights ON/OFF
  • 3 interfaces with microcontroller: DA, /CS, /CP(4 interfaces if /RESET is added)
  • 1-byte instruction execut ion (excluding data write to RAM)
  • Built-in oscillation circuit (external C and R) 80-pin plastic LQFP (LQFP80-P-1414-0.65-K)

V1.0 2 August, 2009 BLOCK DIAGRAM

V1.0 3 August, 2009 APPLICATION CIRCUIT Notes: *1. The VDISP voltage depends on the fluorescent display tube used. Adjust the value of the constants R3 and ZD to the VDISP voltage used. *2. The value of R1 & C1 depend on PT6321 supply voltage of VDD (VDD=5V: R1=3.3KΩ, C1=47pF; VDD=3.3V: R1=3.3KΩ, C1=39pF) *3. R2=1KΩ, C2=0.1µF

V1.0 4 August, 2009 ORDER INFORMATION Valid Part Number Package Type Top Code PT6321-LQ 80 Pins, LQFP PT6321-LQ PIN CONFIGURATION

V1.0 5 August, 2009 PIN DESCRIPTION Pin Name I/O Connects to Description Pin No AD1~4 O Fluorescent tube anode electrode Fluorescent display tube anode electrode drives output. Directly connected to fluorescent display tube. No pull-down resistor is required. I OH>–10.0mA 1,2,79,80 SEG1~35 O Fluorescent tube anode electrode Fluorescent display tube anode electrode drives output. Directly connected to fluorescent display tube. No pull-down resistor is required. IOH>–5.0mA 3-37 VDISP1~2 Power supply V DISP-PGND are power supplies for driving fluorescent tubes 38,78 COM1~24 O Fluorescent tube grid electrode Fluorescent display tube grid electrode drives output. Directly connected to fluorescent display tube. No pull-down resistor is required. I OH>–20.0mA 39-62 PGND1~2 Power supply High Voltage GND pin 63,76 LGND Power supply Logic GND pin 64 OSC0 I Connect R and C externally. The RC time constant depends on the VDD voltage used. Set the target oscillation frequency to 2 MHz. OSC1 O C1, R1 (RC oscillation circuit) See Application Circuit) 66 Reset input. Setting this pin to "Low" initializes all the functions. The initial status is as follows.

  • Address of each RAM….. address "00"H
  • Data of each RAM….. Content is undefined
  • Number of display digits….. 24 digits
  • Contrast adjustment….. 8/16
  • All lights ON or OFF….OFF mode
  • All outputs….. "Low" level /RESET I Microcontroller or C2, R2 (Circuit when R and C are connected externally) See application Circuit /CS I Microcontroller Chip select input Setting this pin to "H" disables serial data transfer. 68 /CP I Microcontroller Shift clock input. Serial data is shifted on the rising edge of /CP. 69 DA I Microcontroller Serial data input (positive logic). Input from LSB. 70 VDD Power supply Logic Voltage Pin 71 P1~4 O LED drive control terminals General port output. Output of these pins in static operation, so these pins can drive the LED. IOH>–2.0mA 72-75

V1.0 6 August, 2009 IMPORTANT NOTICE Princeton Technology Corporation (PTC ) reserves the right to make co rrections, modifications, enhancements, improvements, and other changes to its products and to discontinue any product without notice at any time. PTC cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a PTC product. No circuit patent licenses are implied. Princeton Technology Corp. 2F, 233-1, Baociao Road, Sindian, Taipei 23145, Taiwan Tel: 886-2-66296288 Fax: 886-2-29174598 http://www.princeton.com.tw