PT500-2000 | DigiCamel IC Datasheet

Online Datasheet

Read PT500-2000 online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 4

Technical content

Horizontal or Vertical Mount FIG. “1” STANDARD VERTICAL DASH NUMBER* IND. (µH) ±15% @ 1 kHz DCR MAXIMUM (OHMS) RATED IDC (AMPS) FIG. “2” HORIZONTAL FIG. “3” 2-LEAD VERTICAL FIG. “4” 4-LEAD VERTICAL PT SERIES POWER TOROIDS PT5 -5 30 PT5 -7 00 PT5 -800 PT5 -1000 PT10-5 30 PT10-680 PT10-82 0 PT10-990 PT2 5 -680 PT2 5 -800 PT2 5 -900 PT2 5 -1000 PT5 0-7 80 PT5 0-900 PT5 0-102 0 PT5 0-132 0 PT7 5 -900 PT7 5 -980 PT7 5 -12 60 PT7 5 -15 5 0 PT100-1000 PT100-1100 PT100-12 60 PT100-15 5 0 PT15 0-1040 PT15 0-12 5 0 PT15 0-15 00 PT15 0-2 05 0 PT2 5 0-12 00 PT2 5 0-15 00 PT2 5 0-1800 PT300-12 00 PT300-15 00 PT300-17 5 0 PT400-12 00 PT400-15 00 PT400-17 5 0 PT5 00-145 0 PT5 00-17 5 0 PT5 00-2 000 PT7 5 0-1400 PT7 5 0-17 00 PT7 5 0-2 05 0 PT1000-1400 PT1000-17 5 0 PT1000-2 05 0 Power Inductors 2 7 0 Q uaker R d., E ast Aurora N Y 1405 2 • Phone 7 16-65 2 -3600 • F ax 7 16-65 2 -4814 • E -m ail: apisales@ delevan .com • w w w.delevan.com 2 5 2 5 2 5 2 5 5 0 5 0 5 0 5 0 7 5 7 5 7 5 7 5 100 100 100 100 15 0 15 0 15 0 15 0 2 5 0 2 5 0 2 5 0 300 300 300 400 400 400 5 00 5 00 5 00 7 5 0 7 5 0 7 5 0 1000 1000 1000 0.015 0.012 0.010 0.008 0.02 0 0.015 0.010 0.008 0.035 0.02 5 0.02 0 0.014 0.05 0 0.030 0.02 5 0.02 0 0.060 0.040 0.035 0.02 5 0.080 0.05 0 0.035 0.02 8 0.100 0.060 0.05 0 0.040 0.130 0.080 0.05 5 0.15 0 0.100 0.07 5 0.2 5 0 0.180 0.110 0.2 2 0 0.160 0.090 0.35 0 0.2 80 0.15 0 0.62 0 0.42 0 0.2 00 6.1 7 .4 10.6 12 .8 4.9 6.8 9.3 13.2 4.4 6.6 7 .0 10.4 3.8 5 .6 7 .0 11.0 3.9 5 .2 7 .4 10.6 3.5 5 .1 7 .8 10.3 3.4 5 .7 7 .7 12 .3 3.8 6.1 9.1 3.3 5 .5 7 .3 2 .4 4.7 6.0 3.4 5 .0 8.0 2 .6 3.7 6.4 1.8 3.1 5 .9

••
•• Notes to Figure 5 (Page 100) The PT T oroid Series inductance is speciﬁed at AC and D C signal levels w hich have no signiﬁcant effect on the perm eability of the pow dered iron toroidal core. Superim posed AC and D C voltages w ill change the perm eability and therefore the inductance, under operating conditions. T ypically, D C currents w ill reduce the inductance, w hile AC signals w ill increase the inductance up to a point, before beginning to decrease. Supporting inform ation is provided, detailing the AC or D C effects upon each part. Saturation resulting from D C currents is speciﬁed w ith waveform having less than a 1% ripple content. W hen considering the AC waveform , both the frequency and voltage level m ust be taken into account. A s an aid in deﬁning w hat effect the alternating sine wave signal w ill have, the voltage/frequency factor curve can be used. T o determ ine w hat change of inductance can be expected at a given voltage level and frequency, sim ply divide the sinusoidal R M S voltage by the frequency. The voltage is in volts and the frequency is in hertz. A s an exam ple, if using part num ber PT2 5 -680 at a 1VR M S signal level, and a frequency of 2 5 K H z, the voltage/frequency factor is calculated to be: 1VR M S/2 5 ,000H z = 40 x 10–6. R eferring to the graph, a 39% increase in inductance w ould be expected. Notes to Figure 6 (Page 100) Typical saturation effects as a function of D C ﬂow ing through the part. D ata is representative of a D C w aveform w ith less than 1% ripple, and an AC w aveform less than 10 gauss. Note This inform ation is intended to be used in assisting the designer in part selection. E ach operating application m ay contain other variables w hich m ust be considered in part selection; such as tem perature effects, w aveform distortion, etc.… D elevan Sales/E ngin eering staff is available to provide inform ation as needed to ﬁt each application. Inductance tested at 1 kH z, <10 gauss and 0 A D C DC Resistance at 2 5 °C Rated Idc based on 40°C m axim um rise from 2 5 °C am bient w ith

0 A rm s

Windings single layered to m axim ize operating frequency and m inim ize board space Self leads solder coated to w ithin 0.05 0" of seating plane Other values available on request Packaging Bulk only Mounting Standard m ounting is self -lead radial per F igure “1”. O ptional m ounting m ethods are self -leaded horizontal per F igure “2 ” or vertical base m ounted per F igures “3” and “4”. STANDARD VERTICAL HORIZONTAL VERTICAL 2-LEAD VERTICAL 4-LEAD FIGURE FIGURE FIGURE FIGURE *C om plete part # m ust include series # PLU S the dash # F or surface ﬁnish inform ation, refer to w w w.delevanﬁnishes.com MOUNTING AVAILABLE

27 0 Q uaker R d., East Aurora N Y 1405 2 • Phone 7 16-65 2-3600 • Fax 7 16-65 2-48 14 • E-m ail: apisales@ delevan .com • w w w.delevan.com PT SERIES (continued) mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches IND.(µH) ± 15% @1kHz DCR MAX. (OHMS) PART NUMBER RATED IDC (Amps) A Max. 5 0 5 0 5 0 5 0 7 5 7 5 7 5 7 5 100 100 100 100 15 0 15 0 15 0 15 0 25 0 25 0 25 0 300 300 300 400 400 400 5 00 5 00 5 00 7 5 0 7 5 0 7 5 0 1000 1000 1000 0.015 0.012 0.010 0.008 0.020 0.015 0.010 0.008 0.035 0.025 0.020 0.014 0.05 0 0.030 0.025 0.020 0.060 0.040 0.035 0.025 0.08 0 0.05 0 0.035 0.028 0.100 0.060 0.05 0 0.040 0.130 0.08 0 0.05 5 0.15 0 0.100 0.07 5 0.25 0 0.18 0 0.110 0.220 0.160 0.090 0.35 0 0.28 0 0.15 0 0.620 0.420 0.200 6.1 7 .4 10.6 12.8 4.9 6.8 9.3 13.2 4.4 6.6 7 .0 10.4 3.8 5 .6 7 .0 11.0 3.9 5 .2 7 .4 10.6 3.5 5 .1 7 .8 10.3 3.4 5 .7 7 .7 12.3 3.8 6.1 9.1 3.3 5 .5 7 .3 2.4 4.7 6.0 3.4 5 .0 8 .0 2.6 3.7 6.4 1.8 3.1 5 .9 0.5 3 0.7 0 0.8 0 1.00 0.5 3 0.68 0.8 2 0.99 0.68 0.8 0 0.90 1.00 0.7 8 0.90 1.02 1.32 0.90 0.98 1.26 1.5 5 1.00 1.10 1.26 1.5 5 1.04 1.25 1.5 0 2.05 1.20 1.5 0 1.8 0 1.20 1.5 0 1.7 5 1.20 1.5 0 1.7 5 1.45 1.7 5 2.05 1.40 1.7 0 2.05 1.40 1.7 5 2.05 13.46 17 .7 8 20.32 25 .40 13.46 17 .27 20.8 3 25 .15 17 .27 20.32 22.8 6 25 .40 19.8 1 22.8 6 25 .91 33.5 3 22.8 6 24.8 9 32.00 39.37 25 .40 27 .94 32.00 39.37 26.42 31.7 5 38 .10 5 2.07 30.48 38 .10 45 .7 2 30.48 38 .10 44.45 30.48 38 .10 44.45 36.8 3 44.45 5 2.07 35 .5 6 43.18 5 2.07 35 .5 6 44.45 5 2.07 B Max. 0.23 0.33 0.36 0.40 0.23 0.33 0.37 0.40 0.37 0.35 0.40 0.40 0.36 0.38 0.62 0.63 0.36 0.38 0.60 0.64 0.36 0.5 0 0.60 0.64 0.5 0 0.5 8 0.62 0.92 0.5 5 0.60 0.7 7 0.5 5 0.60 0.7 6 0.5 5 0.60 0.7 8 0.5 8 0.7 5 0.8 8 0.5 5 0.7 0 0.8 5 0.5 5 0.7 0 0.8 5 5 .8 4 8 .38 9.14 10.16 5 .8 4 8 .38 9.40 10.16 9.40 8 .8 9 10.16 10.16 9.14 9.65 15 .7 5 16.00 9.14 9.65 15 .24 16.26 9.14 12.7 0 15 .24 16.26 12.7 0 14.7 3 15 .7 5 23.37 13.97 15 .24 19.5 6 13.97 15 .24 19.30 13.97 15 .24 19.8 1 14.7 3 19.05 22.35 13.97 17 .7 8 21.5 9 13.97 17 .7 8 21.5 9 C Nominal 0.17 0.24 0.31 0.34 0.17 0.24 0.29 0.34 0.29 0.28 0.30 0.37 0.27 0.30 0.43 0.5 3 0.29 0.30 0.49 0.5 3 0.29 0.42 0.49 0.5 3 0.41 0.48 0.5 0 0.8 0 0.49 0.5 0 0.69 0.48 0.5 1 0.65 0.48 0.5 0 0.7 0 0.5 0 0.62 0.7 6 0.48 0.62 0.7 8 0.48 0.62 0.7 8 4.32 6.10 7 .8 7 8 .64 4.32 6.10 7 .37 8 .64 7 .37 7 .11 7 .62 9.40 6.8 6 7 .62 10.92 13.46 7 .37 7 .62 12.45 13.46 7 .37 10.67 12.45 13.46 10.41 12.19 12.7 0 20.32 12.45 12.7 0 17 .5 3 12.19 12.95 16.5 1 12.19 12.7 0 17 .7 8 12.7 0 15 .7 5 19.30 12.19 15 .7 5 19.8 1 12.19 15 .7 5 19.8 1 D Min. 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 0.5 0 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 E Nominal 0.025 0.032 0.040 0.05 1 0.025 0.032 0.040 0.05 1 0.025 0.032 0.040 0.05 1 0.025 0.032 0.040 0.05 1 0.025 0.032 0.040 0.05 1 0.025 0.032 0.040 0.05 1 0.025 0.032 0.040 0.05 1 0.025 0.036 0.05 1 0.025 0.032 0.045 0.020 0.025 0.040 0.025 0.036 0.045 0.020 0.025 0.036 0.016 0.025 0.032 0.64 0.8 1 1.02 1.30 0.64 0.8 1 1.02 1.30 0.64 0.8 1 1.02 1.30 0.64 0.8 1 1.02 1.30 0.64 0.8 1 1.02 1.30 0.64 0.8 1 1.02 1.30 0.64 0.8 1 1.02 1.30 0.64 0.91 1.30 0.64 0.8 1 1.14 0.5 1 0.64 1.02 0.64 0.91 1.14 0.5 1 0.64 0.91 0.41 0.64 0.8 1 F Nominal 0.45 0 0.600 0.7 20 0.95 0 0.45 0 0.600 0.7 20 0.95 0 0.5 8 0 0.7 00 0.8 20 0.95 0 0.68 0 0.7 90 0.920 1.220 0.7 7 0 0.8 90 1.200 1.5 00 0.8 8 0 0.8 90 1.200 1.5 00 0.8 8 0 1.160 1.420 2.000 1.200 1.45 0 1.7 5 0 1.200 1.400 1.7 5 0 1.15 0 1.400 1.7 5 0 1.400 1.7 00 2.000 1.400 1.660 2.000 1.360 1.660 2.000 11.43 15 .24 18 .30 24.13 11.43 15 .24 18 .30 24.13 14.7 3 17 .7 8 20.8 3 24.13 17 .27 20.07 23.37 30.99 19.5 6 22.61 30.48 38 .10 22.35 22.61 30.48 38 .10 22.35 29.46 36.07 5 0.8 0 30.48 36.8 3 44.45 30.48 35 .5 6 44.45 29.21 35 .5 6 44.45 35 .5 6 43.18 5 0.8 0 35 .5 6 42.16 5 0.8 0 34.5 4 42.16 5 0.8 0 ELECTRICAL PHYSICAL PARAMETERS Note: Vertical conﬁguration is standard; add sufﬁx “H M ” for horizontal m ounting SERIES PT IRON CORE P T5 -5 30 P T5 -7 00 P T5 -8 00 P T5 -1000 P T10-5 30 P T10-68 0 P T10-8 20 P T10-990 P T25 -68 0 P T25 -8 00 P T25 -900 P T25 -1000 P T5 0-7 8 0 P T5 0-900 P T5 0-1020 P T5 0-1320 P T7 5 -900 P T7 5 -98 0 P T7 5 -1260 P T7 5 -15 5 0 P T100-1000 P T100-1100 P T100-1260 P T100-15 5 0 P T15 0-1040 P T15 0-125 0 P T15 0-15 00 P T15 0-205 0 P T25 0-1200 P T25 0-15 00 P T25 0-18 00 P T300-1200 P T300-15 00 P T300-17 5 0 P T400-1200 P T400-15 00 P T400-17 5 0 P T5 00-145 0 P T5 00-17 5 0 P T5 00-2000 P T7 5 0-1400 P T7 5 0-17 00 P T7 5 0-205 0 P T1000-1400 P T1000-17 5 0 P T1000-205 0 Power Toroids FIGURE 1: STANDARD VERTICAL MOUNT FIGURE 2: HORIZONTAL MOUNT

FIGURE# Power Inductors 270 Q uaker R d., East Aurora N Y 140 52 • Phone 716-652-360 0 • Fax 716-652-4814 • E-m ail: apisales@ delevan .com • w w w.delevan.com PT SERIES (continued) mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches IND.(µH) ± 15% @1kHz DCR MAX. (OHMS) PART NUMBER RATED IDC (Amps) A Max. B Max. C Typical D Typical E Max. F Typical ELECTRICAL PHYSICAL PARAMETERS Power Toroids 10 0 10 0 10 0 150 150 150 250 250 30 0 30 0 40 0 40 0 40 0 50 0 50 0 750 750 750 10 0 0 10 0 0 10 0 0 0 .0 15 0 .0 12 0 .0 10 0 .0 20 0 .0 15 0 .0 10 0 .0 35 0 .0 25 0 .0 20 0 .0 50 0 .0 30 0 .0 25 0 .0 60 0 .0 40 0 .0 35 0 .0 80 0 .0 50 0 .0 35 0 .10 0 0 .0 60 0 .0 50 0 .130 0 .0 80 0 .150 0 .10 0 0 .250 0 .180 0 .110 0 .220 0 .160 0 .350 0 .280 0 .150 0 .620 0 .420 0 .20 0 6.1 7.4 10 .6 4.9 6.8 9.3 4.4 6.6 7.0 3.8 5.6 7.0 3.9 5.2 7.4 3.5 5.1 7.8 3.4 5.7 7.7 3.8 6.1 3.3 5.5 2.4 4.7 6.0 3.4 5.0 2.6 3.7 6.4 1.8 3.1 5.9 0 .580 0 .650 0 .830 0 .580 0 .650 0 .830 0 .650 0 .830 0 .950 0 .830 0 .830 1.250 0 .950 0 .950 1.250 0 .950 0 .950 1.250 0 .950 1.250 1.50 0 1.250 1.50 0 1.250 1.50 0 1.250 1.50 0 1.750 1.450 1.750 1.40 0 1.70 0 2.0 50 1.40 0 1.750 2.0 50 14.73 16.51 21.0 8 14.73 16.51 21.0 8 16.51 21.0 8 24.13 21.0 8 21.0 8 31.75 24.13 24.13 31.75 24.13 24.13 31.75 24.13 31.75 38.10 31.75 38.10 31.75 38.10 31.75 38.10 44.45 36.83 44.45 35.56 43.18 52.0 7 35.56 44.45 52.0 7 0 .340 0 .450 0 .450 0 .340 0 .450 0 .450 0 .450 0 .450 0 .60 0 0 .450 0 .450 0 .70 0 0 .60 0 0 .60 0 0 .70 0 0 .60 0 0 .60 0 0 .70 0 0 .60 0 0 .70 0 0 .80 0 0 .70 0 0 .80 0 0 .70 0 0 .80 0 0 .70 0 0 .80 0 0 .90 0 0 .80 0 0 .90 0 0 .80 0 0 .90 0 0 .90 0 0 .80 0 0 .90 0 0 .90 0 8.64 11.43 11.43 8.64 11.43 11.43 11.43 11.43 15.24 11.43 11.43 17.78 15.24 15.24 17.78 15.24 15.24 17.78 15.24 17.78 20 .32 17.78 20 .32 17.78 20 .32 17.78 20 .32 22.86 20 .32 22.86 20 .32 22.86 22.86 20 .32 22.86 22.86 0 .220 0 .30 0 0 .30 0 0 .220 0 .30 0 0 .30 0 0 .30 0 0 .30 0 0 .450 0 .30 0 0 .30 0 0 .50 0 0 .450 0 .450 0 .50 0 0 .450 0 .450 0 .50 0 0 .450 0 .50 0 0 .60 0 0 .50 0 0 .60 0 0 .50 0 0 .60 0 0 .50 0 0 .60 0 0 .70 0 0 .60 0 0 .70 0 0 .60 0 0 .70 0 0 .70 0 0 .60 0 0 .70 0 0 .70 0 5.59 7.62 7.62 5.59 7.62 7.62 7.62 7.62 11.43 7.62 7.62 12.70 11.43 11.43 12.70 11.43 11.43 12.70 11.43 12.70 15.24 12.70 15.24 12.70 15.24 12.70 15.24 17.78 15.24 17.78 15.24 17.78 17.78 15.24 17.78 17.78 0 .0 25 0 .0 32 0 .0 40 0 .0 25 0 .0 32 0 .0 40 0 .0 25 0 .0 32 0 .0 40 0 .0 25 0 .0 32 0 .0 40 0 .0 25 0 .0 32 0 .0 40 0 .0 25 0 .0 32 0 .0 40 0 .0 25 0 .0 32 0 .0 50 0 .0 25 0 .0 50 0 .0 25 0 .0 50 0 .0 20 0 .0 50 0 .0 50 0 .0 50 0 .0 50 0 .0 50 0 .0 50 0 .0 50 0 .0 50 0 .0 50 0 .0 50 0 .63 0 .81 1.0 2 0 .63 0 .81 1.0 2 0 .63 0 .81 1.0 2 0 .63 0 .81 1.0 2 0 .63 0 .81 1.0 2 0 .63 0 .81 1.0 2 0 .63 0 .81 1.27 0 .63 1.27 0 .63 1.27 0 .51 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 0 .640 0 .810 0 .910 0 .640 0 .790 0 .930 0 .790 0 .910 1.0 10 0 .890 1.110 1.130 1.0 10 1.0 90 1.390 1.130 1.230 1.390 1.170 1.380 1.630 1.330 1.630 1.330 1.630 1.330 1.630 1.880 1.580 1.880 1.530 1.830 2.180 1.530 1.980 2.180 16.26 20 .57 23.11 16.26 20 .0 7 23.62 20 .0 7 23.11 25.65 22.61 28.19 28.70 25.65 27.69 35.31 28.70 31.24 35.31 29.72 35.0 5 41.40 33.78 41.40 33.78 41.40 33.78 41.40 47.75 40 .13 47.75 38.86 46.48 55.37 38.86 50 .29 55.37 0 .290 0 .325 0 .415 0 .290 0 .325 0 .415 0 .325 0 .415 0 .475 0 .415 0 .415 0 .625 0 .475 0 .475 0 .625 0 .475 0 .475 0 .625 0 .475 0 .625 0 .90 0 0 .625 0 .90 0 0 .625 0 .90 0 0 .625 0 .90 0 1.20 0 0 .90 0 1.20 0 0 .90 0 1.20 0 1.20 0 0 .90 0 1.20 0 1.20 0 7.37 8.25 10 .54 7.37 8.25 10 .54 8.25 10 .54 12.0 6 10 .54 10 .54 15.87 12.0 6 12.0 6 15.87 12.0 6 12.0 6 15.87 12.0 6 15.87 22.86 15.87 22.86 15.87 22.86 15.87 22.86 30 .48 22.86 30 .48 22.86 30 .48 30 .48 22.86 30 .48 30 .48 SERIES PT VERTICAL MOUNT IRON CORE PT5-530-VM PT5-700-VM PT5-800-VM PT10-530-VM PT10-680-VM PT10-820-VM PT25-680-VM PT25-800-VM PT25-900-VM PT50-780-VM PT50-900-VM PT50-1020-VM PT75-900-VM PT75-980-VM PT75-1260-VM PT100-1000-VM PT100-1100-VM PT100-1260-VM PT150-1040-VM PT150-1250-VM PT150-1500-VM PT250-1200-VM PT250-1500-VM PT300-1200-VM PT300-1500-VM PT400-1200-VM PT400-1500-VM PT400-1750-VM PT500-1450-VM PT500-1750-VM PT750-1400-VM PT750-1700-VM PT750-2050-VM PT1000-1400-VM PT1000-1750-VM PT1000-2050-VM FIGURE 3: 2-LEAD VERTICAL BASE MOUNT FIGURE 4: 4-LEAD VERTICAL BASE MOUNT

270 Q uaker R d., East Aurora N Y 1 4052 • Phone 71 6-652-3600 • Fax 71 6-652-481 4 • E-m ail: apisales@ delevan .com • w w w.delevan.com SERIES PTxxxR PT Power Toroids - Horizontal or Vertical Mount 1 ) PT5-530 2) PT1 0-530 3) PT5-700 4) PT5-800 5) PT1 0-680 6) PT5-1 000 7) PT1 0-820 8) PT1 0-990 9) PT25-680 1 0) PT25-800 1 1 ) PT25-900 1 2) PT25-1 000 1 3) PT50-780 1 4) PT50-900 1 5) PT75-900 1 6) PT75-980 1 7) PT50-1 020 1 8) PT1 00-1 000 1 9) PT1 00-1 1 00 20) PT50-1 320 21 ) PT1 50-1 040 22) PT75-1 260 23) PT1 00-1 260 24) PT75-1 550 25) PT1 00-1 550 26) PT1 50-1 250 27) PT1 50-1 500 28) PT250-1 200 29) PT300-1 200 30) PT250-1 500 31 ) PT400-1 200 32) PT300-1 500 33) PT400-1 500 34) PT250-1 800 35) PT1 50-2050 36) PT300-1 750 37) PT500-1 450 38) PT400-1 750 39) PT750-1 400 40) PT500-1 750 41 ) PT1 000-1 400 42) PT750-1 750 43) PT500-2000 44) PT1 000-1 750 45) PT750-2050 46) PT1 000-2050 KEY TO FIGURE 5 CURVE NUMBERS G raphs apply to all m ounting styles. For m ore detailed graphs, contact factory. For m ore detailed graphs, contact factory

Product Information

PT500-2000 specifications and overview.

Summary

Power Toroids - Horizontal or Vertical Mount

Description

Power Toroids - Horizontal or Vertical Mount

Source title PT500-2000 Datasheet(PDF) - API Delevan

Related Parts

More parts from the same family.

Browse manufacturer