PT14

PT14 FERROXCUBE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Supersedes data of September 2004 2008 Sep 01 FERROXCUBE PT14/8 PT, PTS, PTS/I cores and accessories

2008 Sep 01 1037

PT, PTS, PTS/I cores and accessories PT14/8 (1408TS) CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.910 mm −1 Ve effective volume 492 mm 3 Ie effective length 21.1 mm Ae effective area 23.3 mm 2 Amin minimum area 19.9 mm 2 m mass of set ≈ 2.8 g handbook, halfpage 5.8 ±0.2 CBW109 8.3 ±0.15 3.1 ±0.075 5.9 ±0.1 8.6 min. 11.8 ±0.2 14.05 ±0.25 3.3 ±0.6 9.4 ±0.15 Fig.1 PT14/8 core set. Dimensions in mm. Core sets for general purpose transformers and power applications Clamping force for AL measurements, 15 ±15 N. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C81 63 ±3% ≈ 45 ≈ 630 PT14/8-3C81-A63 100 ±3% ≈ 72 ≈ 360 PT14/8-3C81-A100 160 ±3% ≈ 115 ≈ 210 PT14/8-3C81-A160 250 ±3% ≈ 180 ≈ 120 PT14/8-3C81-A250 315 ±5% ≈ 227 ≈ 90 PT14/8-3C81-A315 2400 ±25% ≈ 1730 ≈ 0 PT14/8-3C81 3C91 2400 ±25% ≈ 1730 ≈ 0 PT14/8-3C91 3F3 63 ±3% ≈ 45 ≈ 630 PT14/8-3F3-A63 100 ±3% ≈ 72 ≈ 360 PT14/8-3F3-A100 160 ±3% ≈ 115 ≈ 210 PT14/8-3F3-A160 250 ±3% ≈ 180 ≈ 120 PT14/8-3F3-A250 315 ±5% ≈ 227 ≈ 90 PT14/8-3F3-A315 1650 ±25% ≈1190 ≈ 0 PT14/8-3F3

2008 Sep 01 1038

PT, PTS, PTS/I cores and accessories PT14/8 (1408TS) Core sets of high permeability grades Clamping force for AL measurements, 15 ±5N . Properties of core sets under power conditions Note 1. Measured at 60 °C. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3E27 4500 ±25% ≈ 3240 ≈ 0 PT14/8-3E27 GRADE B (mT) at CORE LOSS (W) at H = 250 A/m; f = 25 kHz; T=1 0 0 °C f = 25 kHz; = 200 mT; T = 100 °C f = 100 kHz; =1 0 0m T ; T = 100 °C f = 100 kHz; = 200 mT; T = 100 °C f=4 0 0k H z ; =5 0m T ; T = 100 °C Bˆ Bˆ Bˆ Bˆ

2008 Sep 01 1039

PT, PTS, PTS/I cores and accessories PT14/8 (1408TS) COIL FORMERS General data 6-pins PT14/8 coil former Winding data and area product for 6-pins PT14/8 coil former Additional coil formers and mounting parts are those of “P14/8”, but “area product” is different. Winding data and area product (for PT14/8) for CP-P14/8 coil former PARAMETER SPECIFICATION Coil former material polyamide (PA), glass-reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E41938(M) Pin material copper-tin alloy (CuSn), tin (Sn) plated Maximum operating temperature 130 °C, “IEC 60085” class B Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 7.9 4.1 29.2 184 CPV-PT14/8-1S-6P NUMBER OF SECTIONS WINDING AREA (mm2) MINIMUM WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 8.8 4.1 28.9 205 CP-P14/8-1S 22 × 4.0 2 × 1.85 28.9 2 x 93.2 CP-P14/8-2S handbook, full pagewidth 12.95 max 5.21 min 1.1 3.8 4.06 5.51 max 11.53 max7.16 7.85 max 16.64 max 6.15 min MGB614 Fig.2 PT14/8 coil former; 6-pins. Dimensions in mm.

2008 Sep 01 1040

PT, PTS, PTS/I cores and accessories PT14/8 (1408TS) Winding data and area product (for PT14/8) for CP-P14/8-A coil former Winding data and area product (for PT14/8) for 4-pins P14/8 coil former for PCB mounting Winding data and area product (for PT14/8) for 6-pins P14/8 coil former for PCB mounting NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 9.4 4.5 29.0 219 CP-P14/8-1S-A 2 2 x 4.32 2 x 2.0 29.0 2 x 101 CP-P14/8-2S-A 33 × 2.19 3 × 1.2 29.0 3 x 51.0 CP-P14/8-3S-A NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) LENGTH OF PINS (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 8.65 4.4 29.0 4.4 202 CPV-P14/8-1S-4SPD 1 8.65 4.4 29.0 6.8 202 CPV-P14/8-1S-4SPDL NUMBER OF SECTIONS MINIMUM WINDING AREA (mm NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) LENGTH OF PINS (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 8.65 4.4 29.0 4.4 202 CPV-P14/8-1S-6PD 1 8.65 4.4 29.0 6.8 202 CPV-P14/8-1S-6PDL

2008 Sep 01 1041

PT, PTS, PTS/I cores and accessories PT14/8 (1408TS) DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelimin ary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.