PT0402FR-070R025L YAGEO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512 RoHS compliant & Halogen free Product specification – December 30, 2015 V.1

Chip Resistor Surface Mount www.yageo.com Dec. 30, 2015 V.1 Product specification SERIES PT 0402/0603/0805/1206/2010/2512 ORDERING INFORMATION - GLOBAL PART NUMBER Part numbers is identified by the series, size, tolerance, packing type , temperature coefficient, t aping reel and resistance value. SCOPE This specification describes PT series current sensor - low TCR and high power with lead -free terminations made by th ick film process.

APPLICATIONS

 Converters  Printer equipment  Server board  Telecom  Consumer electronics  Car electronics

FEATURES

 AEC-Q200 qualified  Halogen Free Epoxy  RoHS compliant  Reduc e environmentally  High component and equipment reliability  Non-forbidden material used in products /production  Low resi stances applied to current sensing  Moisture sensitivity level: MSL 1 ORDERING EXAMPLE The ordering code of a PT0603 chip resistor, 1/5W, value 0.56 with ±1% tolerance, supplied in 7-inch tape reel is: PT0603FR-7W0R56L. NOTE 1. All our Rchip products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) Resistance rule of global part number Resistance code rule Example 0RXXX (25 to 910 mΩ) 0R025 = 25 mΩ 0R1 = 100 mΩ 0R91 = 910 mΩ YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) PT XXXX X X X XX XXXX L (1) SIZE 0402 / 0603 / 0805 / 1206 / 2010 / 2512 (2) TOLERANCE F = ± 1% G = ± 2% J = ± 5% “-“ = jumper ordering (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE – = Based on spec. (5) TAPING REEL 07 = 7 inch dia. Reel and standard power 13 = 13 inch dia. Reel and standard power 7W = 7 inch dia. reel and 2 x standard power 3W = 13 inch dia. reel and 2 x standard power (6) RESISTANCE VALUE There are 3~5 digits indicated the resistor value. Letter R is decimal point. Detailed coding rules of resistance are shown in the table of “Resistance rule of global part number”. (7) DEFAULT CODE Letter L is system default code for order only (Note)

Chip Resistor Surface Mount www.yageo.com Dec. 30, 2015 V.1 Product specification SERIES PT 0402/0603/0805/1206/2010/2512 MARKING PT0402 No marking PT0603 E-24 series / Non -E series (R= 250/400/500 mΩ): 3 digits The “R” is used as a decimal point ; the other 2 digits are significant. PT0805 / PT1206 / PT2010 / PT2512 E-24 series / Non-E series (R= 250/400/500 m Ω): 4 digits The “R” is used as a decimal point ; the other 3 digits are significant. For further marking information, please refer to data sheet “Chip resistors marking ”. Fig. 3 Value = 220 mΩ Fig. 2 Value = 220 mΩ Fig. 4 Fig. 5 Chip resistor outlines OOUUTTLLIINNEESS CONSTRUCTION The resistors are constructed out of a high -grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive paste. The composition of the paste is adjusted to give the approximately required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the three external terminations (Cu/Ni/matte tin) are added, as shown in Fig. 5.

Chip Resistor Surface Mount www.yageo.com Dec. 30, 2015 V.1 Product specification SERIES PT 0402/0603/0805/1206/2010/2512 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) Note: For resistance range: 75mΩ ≦ R < 91mΩ Table 1 DIMENSIONS For dimensions, please refer to Table 1 Fig. 6 Chip resistor dimensions

Chip Resistor Surface Mount www.yageo.com Dec. 30, 2015 V.1 Product specification SERIES PT 0402/0603/0805/1206/2010/2512

ELECTRICAL CHARACTERISTICS

Temp. range Max working voltage Tolerance Temperature Coefficient of Resistance Jumper criteria PT0402 1/16W -55°C to +155°C (PxR)^1/2 E24 ±2%, ±5% E24/E96 ±1% 50mΩ ≦ R＜68mΩ 68mΩ ≦ R＜100mΩ 100mΩ ≦ R＜1Ω ±600ppm/°C ±300ppm/°C ±200ppm/°C Max. resistance Rated current 10mΩ 1/8 W -- PT0603 1/10W 50mΩ 50mΩ ＜R＜68mΩ 68mΩ ≦ R＜100mΩ 100mΩ ≦ R＜1Ω 0/+400ppm/°C 0/+350ppm/°C 0/+300ppm/°C ±200ppm/°C Max. resistance Rated current 8mΩ 1/5 W -- 1/3 W 50mΩ 50mΩ ＜R＜68mΩ 68mΩ 0/+400ppm/°C 0/+350ppm/°C 0/+300ppm/°C PT0805 1/8 W 50mΩ 50mΩ ＜R＜68mΩ 68mΩ ≦ R＜100mΩ 100mΩ ≦ R＜1Ω 0/+350ppm/°C 0/+300ppm/°C 0/+250ppm/°C ±100ppm/°C Max. resistance Rated current 5mΩ 1/4 W -- PT1206 1/4 W 50mΩ ≦ R < 75mΩ 75mΩ ≦ R≦ 100mΩ 100mΩ ＜R＜1Ω ±350ppm/°C ±100ppm/°C ±75ppm/°C Max. resistance Rated current 5mΩ 10A 1/2 W -- PT2010 3/4 W 100 mΩ 100 mΩ < R < 1 Ω ±100 ppm/°C ±75 ppm/°C 1W -- PT2512 1W -- 2W --

Chip Resistor Surface Mount www.yageo.com Dec. 30, 2015 V.1 Product specification SERIES PT 0402/0603/0805/1206/2010/2512 PACKING STYLE AND PACKAGING QUANTITY PACKING STYLE REEL DIMENSION PT0402 PT0603 PT0805 PT1206 PT2010 PT2512 Paper taping reel (R) 7" (178 mm) 10,000 5,000 5,000 5,000 --- --- Embossed taping reel (K) 7" (178 mm) --- --- --- --- 4,000 4,000 NOTE 1. For paper/embossed tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”. Table 3 Packing style and packaging quantity Fig. 7 Maximum dissipation (P max) in percentage of rated power as a function of the operating ambient temperature (Tamb) FUNCTIONAL DESCRIPTION OOPPEERRAATTIINNGG TTEEMMPPEERRAATTUURREE RRAANNGGEE Range: –55 °C to +155 °C PPOOWWEERR RRAATTIINNGG Each type rated power at 7 0 °C: PT0402=1/16W, 1/8W PT0603 =1/10W, 1/5W, 1/3W PT0805 =1/8W, 1/4W PT1206 =1/4W, 1/2W PT2010 =3/4W, 1W PT2512 =1W, 2W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V = √(P X R ) Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value (Ω) FOOTPRINT AND SOLDERING PROFILES Recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting ”.

Chip Resistor Surface Mount www.yageo.com Dec. 30, 2015 V.1 Product specification SERIES PT 0402/0603/0805/1206/2010/2512 TESTS AND REQUIREMENTS TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Coefficient of Resistance (T.C.R.) MIL-STD-202 Method 304 At +25/+125 °C Refer to table 2 Formula: Where t1=+25 °C or specified room temperature t2=+125 °C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Life/ Endurance MIL-STD-202 Method 108A IEC 60115-1 4.25.1 1,000 hours at 70± 2 °C applied RCWV 1.5 hours on, 0.5 hour off, still air required ± (1.0%+0.0005 Ω) High Temperature Exposure MIL-STD-202 Method 108A IEC 60068-2-2 1,000 hours at maximum operating temperature depending on specification, unpowered No direct impingement of forced air to the parts Tolerances: 155± 3 °C ± (1.0%+0.0005 Ω) Moisture Resistance MIL-STD-202 Method 106 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24± 2 hours after test conclusion ± (0.5%+0.0005 Ω) Thermal Shock MIL-STD-202 Method 107 -55/+125 °C Number of cycles required is 300. Maximum Devices mounted: transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air ± (1.0%+0.0005 Ω) Table 4 Test condition, procedure and requirements R2–R1 R1(t2–t1)

Chip Resistor Surface Mount www.yageo.com Dec. 30, 2015 V.1 Product specification SERIES PT 0402/0603/0805/1206/2010/2512 TEST TEST METHOD PROCEDURE REQUIREMENTS Short Time Overload IEC60115-1 4.13 PT standard power: 2.5 times rated voltage for 5 sec at room temperature PT high power: 5 times rated power for 5 sec at room temperature PT jumper: 2.5 times rated current for 5 sec at room temperature ± (1.0%+0.0005 Ω) No visible damage Board Flex/ Bending IEC 60115-1 4.33 Device mounted on PCB test board as described, only 1 board bending required Bending for 0402: 5 mm 0603/0805: 3 mm 1206 and above: 2 mm Holding time: minimum 60± 1 seconds Ohmic value checked during bending ± (1.0%+0.0005 Ω) No visible damage Solderability - Wetting J-STD-002 test B Electrical Test not required Magnification 50X SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245± 3 °C Dipping time: 3± 0.5 seconds Well tinned (≥95% covered) No visible damage - Leaching J-STD-002 test D Leadfree solder, 260 °C, 30 seconds immersion time No visible damage - Resistance to Soldering Heat IEC 60115-1 4.18 Condition B, no pre-heat of samples. Leadfree solder, 260± 5 °C, 10±1 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol ± (0.5%+0.0005 Ω) No visible damage

Chip Resistor Surface Mount www.yageo.com Dec. 30, 2015 V.1 Product specification SERIES PT 0402/0603/0805/1206/2010/2512

REVISION HISTORY

“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 1 Jul. 02, 2015 - - Extend resistor value Version 0 Aug. 21, 2014 - - New datasheet for current sensor - low TCR PT series sizes of 0402/0603/0805/1206 /2010/2512, 1%, 2%, 5% with lead -free termination