100004656 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Edition • 2023-07-21T15:45:46+02:00 Pressure Transmitter With Current Output (2-Wire) PT0.1R-1503-I2-H1143/D840 Type PT0.1R-1503-I2-H1143/D840 ID 100004656 Pressure range Pressure type Relative pressure Pressure range 0…0.1 bar 0…1.45 psi 0…0.01 MPa Admissible overpressure ð 2 bar Permissible vacuum -0.3 bar Burst pressure ï 2 bar Response time < 150 ms Adjustment position Vertical, pressure connection at bottom Vertical position error, pressure connection at top + 0.2 mbar Horizontal position error + 0.1 mbar Long-term stability 0.25 % FS, Acc. to IEC EN 60770-1 Power supply Operating voltage 10…30 VDC Current consumption ð 23 mA Short-circuit/reverse polarity protection yes / yes Protection type and class IP67 / III Insulation voltage 500 VDC Outputs Output 1 Analog output Analog output Current output 4…20 mA Load ð (Supply voltage -10)/20 kò Resolution < ± 0.1 % FS Accuracy LHR ±0.35 % FS (FS < 100 mbar ±0.7 % FS) Temperature behaviour Medium temperature -15…+85 °C Temperature coefficient span TkS ± 0.07 % FS/10 K ■ Ceramic measuring cell ■ Extremely high measuring accuracy ■ Compact and robust design ■ Excellent temperature behavior ■ Pressure range 0…100 mbar rel. ■ 10…30 VDC ■ Analog output 4…20 mA ■ Process connection 1/4"-18 NPT male thread ■ Plug-in device, M12 × 1 Wiring Diagram Functional principle The pressure sensors in the PT…-1500 prod- uct series operate with a ceramic measuring cell in various micropressure ranges of up to -100…600 mbar in 2- or 3-wire technolo- gy. Depending on the sensor variant, the pro- cessed signal is available as an analog output signal (4…20 mA, 0…10 V, 0…5 V, ratiomet- ric). In addition to the standard variants, there are special sensors for uses such as ATEX areas.
Edition • 2023-07-21T15:45:46+02:00 Environmental conditions Ambient temperature -25…+85 °C Storage temperature -40…+85 °C Vibration resistance 20 g, 15…2000 Hz, 15…25 Hz with amplitude ± 15 mm, 1 octave/minute in all 3 directions, 50 con- tinuous loads, according to IEC 68-2-6 Shock resistance 50 g, 6 ms, half sinusoidal curve, all 6 directions, free fall from 1 m onto concrete (6x) acc. to IEC 68-2-27 Mechanical data Housing material Stainless-steel/Plastic, 1.4404 (AISI 316L)/polyary- lamide 50 % GF UL 94 V-0 Pressure connection material Stainless steel 1.4404 (AISI 316L) Pressure transducer material Ceramic AlO Sealing material FPM Process connection 1/4″ NPT-18 male thread Wrench size pressure connection / coupling nut 27 Electrical connection Connector, M12 × 1 Max. tightening torque of housing nut 27 Nm Reference conditions acc. to IEC 61298-1 Temperature 15…+25 °C Atmospheric pressure 800…1060 hPa abs. Humidity 45 % rel. Auxiliary power 24 VDC Tests/approvals Approvals cULus UL registration number E302799 MTTF 965 years acc. to SN 29500 (Ed. 99) 40 °C A wide range of process connections and electrical connections offer a high degree of flexibility in a wide range of applications.