MQDC-506-USB BANNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Figure 1. Pro Converter Cable LED 1 Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the United States and/or other countries.
11 March 2019
Full Preview Capabilities Setup (Recommended) A B C E D F Key A = Pro Converter Cable (MQDC-506-USB) B = Splitter (CSB-M1251FM1251M) C = PC running Pro Editor software D = Any Banner Pro Series-enabled device (K50 shown) E = Power Supply (PSW-24-1) F = 8-Pin to 5-Pin Double-Ended Cordset (MQDC-801-5M-PRO), required for 8-Pin models Install the Pro Converter Cable Driver (Windows 7) When connected to a PC running Microsoft Windows 7 for the first time, the Pro Converter Cable drivers must be installed manually. To manually install the Pro Converter Cable driver on a Windows 7 device, follow these steps. Note: After connecting the Pro Converter Cable to a PC running Microsoft Windows 7 the following message may appear: "Device driver software not successfully installed". 1. Download the latest driver file from www.bannerengineering.com/proeditor. 2. Open Control Panel. 3. Open Device Manager (in the System and Security category). The Pro Converter Cable is listed as Communications Translator under Other Devices with an exclamation mark icon next to it indicating that the device driver has not been successfully installed. 5. Click Browse my computer for driver software. 6. Click Let me pick from a list of device drivers on my computer. 7. Make sure that Show All Devices is selected and click Next. 10. Click OK. 11. A warning displays that the driver is unsigned. Click Yes. The Pro Converter Cable is listed as a COM Port under Ports in Device Manager. Specifications and Requirements Pro Converter Cable Specifications Pro Editor Software PC Requirements Input Voltage
5 V dc from USB Type A connector
20 V dc
View compatible devices at www.bannerengineering.com/ proeditor Certifications Indicators
2 LED indicators:
Green Flashing: Power on Amber Solid: Device on Red Flashing: Device power fault Communications 5-pin M12/Euro-style quick disconnect connector compatible with Banner Pro Series-enabled devices Operating System Microsoft ® Windows ® operating system versions 7 or 10 Hard Drive Space 20 MB USB Available USB port Screen Resolution 1366 × 768 full color minimum Third-Party Software .NET version 4.5.2 or higher Important: Administrative rights are required to install the Pro Editor software. Pro Editor Converter Cable 2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 206059 Rev. C
Includes:
- Pro Converter Cable (MQDC-506- USB)
- Splitter (CSB-M1251FM1251M)
- Power Supply (PSW-24-1) PRO-KIT-K50 Includes:
- Pro Series-enabled K50 (K50L2RGB7Q)
- Pro Converter Cable (MQDC-506- USB)
- Splitter (CSB-M1251FM1251M)
- Power Supply (PSW-24-1) MQDC-506-USB
- Pro Converter Cable
- 1.83 m (6 ft) M12/Euro-style quick disconnect to Device and USB to PC
- Required for connection to Pro Editor CSB-M1251FM1251M
- 5-pin parallel Y splitter (Male- Male-Female)
- For full Pro Editor preview capability
- Requires external power supply, sold separately PSW-24-1
- 24 V dc, 1 A power supply
- 2 m (6.5 ft) PVC cable with M12/ Euro-style quick disconnect
- Provides external power with splitter cable, sold separately ACC-PRO-CABLE5
- Mating accessory for cabled and terminal models
- 150 mm (6 inch) PVC cable with M12/Euro-style quick disconnect
- Lever wire nuts included (qty 5)
- Required to connect cabled models to Pro Converter Cable, sold separately MQDC-801-5M-PRO
- 8-pin to 5-pin double-ended cordset
- 0.31 m (1 ft) PVC cable with M12/ Euro-style quick disconnects
- Required to connect 8-pin Pro Series-enabled devices to Pro Converter Cable (MQDC-506- USB), sold separately Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. Pro Editor Converter Cable P/N 206059 Rev. C www.bannerengineering.com - Tel: + 1 888 373 6767 3
FCC Part 15 and CAN ICES-3 (B)/NMB-3(B) This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the manufacturer. Pro Editor Converter Cable © Banner Engineering Corp. All rights reserved