PSW-1211 MINI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Outline Dimensions ( )inch mm Maximum Ratings Features
- military, hi-rel application
- antenna switching
- UHF/VHF
- satellite communications
- test set-ups
- wideband, 10 to 2500 MHz
- hermetic, metal case
Applications
Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C Power +20 dBm Control Current 5mA CASE STYLE: A06 Outline Drawing PSW-1211 PSW-1211 INSERTION LOSS 0.0 0.5 1.0 1.5 2.0 2.5 0 500 1000 1500 2000 2500 FREQUENCY (MHz) INSERTION LOSS (dB) at RF level of 10 dBm PSW-1211 ISOLATION 100 0 500 1000 1500 2000 2500 FREQUENCY (MHz) ISOLATION (dB) at RF level of 10 dBm PSW-1211 VSWR 1.0 1.1 1.2 1.3 1.4 1.5 0 500 1000 1500 2000 2500 FREQUENCY (MHz) VSWR INPUT OUTPUT at RF level of 10 dBm L= low range(fL to 10 fL) M=mid range(10 fL to fU/2) U=upper range (fU/2 to fU) lw=low band (fL to fU/2) Typical Performance Data Switch Electrical Specifications MODEL NO. FREQ. (MHz) INSERTION LOSS (dB) IN-OUT ISOLATION (dB) Low band lw Upper band U Frequency Band L M U PSW-1211 10 2500 1.1 1.9 1.9 2.7 50 40 35 28 28 22 Additional Specifications VSWR ("ON" STATE) 1.7 MAX. SWITCHING TIME (µSEC) RISE TIME (µSEC) 4 MAX. 2 TYP . CONTROL VOLTAGE ON condition OFF condition +5V 1 dB COMPRESSION 10 to 200 MHz Above 200 MHz +6 increasing to +19 dBm +19 dBm min. Freq. (MHz) INSERTION LOSS (dB) AMP . UNBAL ISOLATION (dB) DELTA VSWR IN OUT(RF 1) ON OFF ON IN-OUT OFF IN-OUT σ σ σ 1 5 7 C ontrol #1 C ontrol #2 R F Output #1 Output #2 R F R F -in Control Logic LOGIC CONTROL 1 CONTROL 2 RF OUT 2 RF OUT 1 State 1: 0V +5V ON OFF State 2: +5V 0V OFF ON Pin Connections RF IN 5 RF OUT 1 2 RF OUT 2 8 CONTROL 1 1 CONTROL 2 7 GROUND 3,4,6 CASE GND 3,6 A B C D E F G H J K wt .200 .20 .14 .031 grams Permanent damage may occur if any of these limits are exceeded. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits 50W SPDT Pin Diode Reflective 10 to 2500 MHz Switch Plug-In REV. A M151107 PSW-1211 WP/CP/AM 151002