AIS800-64O-AF-UN EDGE-CORE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

The Edgecore AIS800-64O and AIS800-64D are high-performance, low latency switches for high-performance data centers. Application Scenarios: ■ Spine Switch A next-generation, highest-capacity switch for data center spine use case. Breakout options include 2 x 400G, 4 x 200G, and 8 x 100G per port, with a maximum of 320 logical ports. Offers reduced cost and power per bit. Scalable and enables migration to 400G leaf connectivity in data centers. ■ AI/ML Clusters Standards-based (Ethernet) networking for AI/ML training, leveraging low latency and high-throughput RoCEv2. Reduces Job Completion Time (JCT) using the cognitive routing and congestion management capabilities of the switch. Fully programmable telemetry enables sophisticated on-chip applications for heightened network insight and efficient network management. ■ High-Performance Computing The large number of high-capacity Ethernet ports enables server interfaces to transition to higher speeds and denser networks. Enables the virtualization of compute and storage with VxLAN switching and routing. ■ Cloud DCI Support 400G QSFP-DD ZR/OpenZR+/+6dBm ZR+ and future proof 800G OSFP ZR/ZR+/+6dBm for Cloud DCI scenario. Key Features and Benefits ■ OSFP800 or QSFP-DD800 switch ports, each supporting 1 x 800 GbE (100G PAM4), or via breakout cables 2 x 400G GbE, 4 x 200 GbE, or 8 x 100 GbE. ■ OSFP800 or QSFP-DD800 switch ports also support 1 x 400 GbE (50G PAM4), 1 x 100 GbE (NRZ), and via breakout cables 2 x 200 GbE, 4 x 100 GbE, or 8 x 50 GbE. ■ Up to 30 W power budget per QSFP800 and QSFP-DD800 port. ■ Incorporates Broadcom Tomahawk 5 switch series silicon.

  • Highest Radix: Up to 320 logical ports on a single chip, low latency
  • Cognitive/Adaptive routing and Dynamic Load Balancing (DLB) and Global Load Balancing (GLB)
  • Advanced shared buffering
  • Programmable in-band telemetry
  • Supports end-to-end congestion control
  • Power efficient due to a monolithic 5nm die
  • Hardware-based link failover for network resiliency and reduced job completion time
  • Support for SRv6
  • Support for VxLAN RIOT ■ BMC module with serial-over-LAN support ■ SyncE and PTPv2 support with 1PPS, 10MHz, and ToD connectors on the front panel ■ Contains e-fuses to protect transceivers and internal components ■ 2 RU form factor ■ Supports hot/cold aisles with front-to-back/AFO/port intake airflow SKU and back-to-front/AFI/port exhaust airflow SKU ■ All ports on front; PSUs and fans accessible from rear ■ Hot-swappable, load-sharing, redundant 3000 W AC/DC PSUs ■ 4 Hot-swappable fan modules with 7+1 redundant fans ■ Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of compatible open source and commercial NOS offerings AIS800

Free Soſtware Included 1110 Airflow: front-to-back Airflow: back-to-front

Description

  1. 64 x 800G OSFP800 ports 8. Port indicators 2. 64 x 800G QSFP-DD800 ports 9. System LEDs 3. 2 x 25G SFP28 ports 10. 1PPS connector 4. RJ-45 management port 11. 10 MHz connector 5. USB 3.0 storage port 12. PSU1 6. RJ-45 console port 13. PSU2 7. ToD port 14. 4 Hot-swappable fan modules with 7+1 redundant fans

Soſtware ■ Switch is loaded with Open Network Install Environment (ONIE) soſtware installer ■ Compatible with the following NOS options: Open source options, plus commercial NOS offerings. System and Port LEDs ■ Port LEDs: Link Status, Activity, Rate ■ Management Port LEDs: Link Status, Activity RJ-45 Port: Link Status, Activity ■ System LEDs: Locator, Diagnostic, PSU, Fan Status, Alarm ■ Reset Button Power ■ PSUs: 2 redundant, load-sharing, hot-swappable 3000 W AC/DC ■ AC PCU: AC input rating: 200-240 VAC at 50-60Hz (16 A/3000 W max.) AC PSU Inlet: IEC 60320 C20 Power efficiency: 90% ~ 94% (without fan) ■ DC PSU: DC Input rating: -48 V ~ -60 V (80 A/3000 W max.) Power efficiency: 93% ~ 96% (without fan) ■ Power Draw: Less than 2775W ( 100% traffic at 40°C ambient temperature with 100% fan speed and 64 x 18 W optics) ■ Power Budget: For all 64 ports all with per-port maximum 30 W capability on both OSFP version and QSFP-DD800 version and actual deployment population subject to total power distribution boundary and thermal considerations. Regulatory ■ Emissions: EN 55032 Class A AS/NZS CISPR32 EN 61000-3-2 EN 61000-3-3 FCC Class A ICES-003 VCCI-CISPR32 ■ Immunity: EN 55035 ■ Safety: UL (CSA 22.2 No 62368-1 & UL 62368-1) CB (IEC/EN 62368-1) ■ Environmental: GR63-CORE (Pre-test) ■ RoHS-2.0 Compliant ■ Electrical and Electronic Equipment (WEEE Directive 2002/96/EC) ■ Country of Origin: Taiwan (TAA Compliant) Ports ■ Switch Ports: 64 x OSFP800 or QSFP-DD800 800GbE ■ Logical Ports: Max. 320 ■ Port Modes: 1 x 800G (8 lanes 100G PAM4) 2 x 400G (4 lanes 100G PAM4) breakout 4 x 200G (2 lanes 100G PAM4) breakout 8 x 100G (1 lane 100G PAM4) breakout 1 x 400G (8 lanes 50G PAM4) 2 x 200G (4 lanes 50G PAM4) breakout 4 x 100G (2 lanes 50G PAM4) breakout 8 x 50G (1 lane 50G PAM4) breakout 1 x 100G (4 lanes 25G NRZ) ■ Management Ports on Port Side: 1 x RJ-45 serial console 1 x RJ-45 1000BASE-T management 2 x SFP28 25G In-band management 1 x USB 3.0 storage port ■ Supported Transceivers and Cables: Note: 800G optics and detailed cabling information can be found at https://www.edge-core.com/products/Transceiver-and-Cables/ Key Components ■ Switch Silicon: BCM78900 Tomahawk 5 ■ CPU Module: Intel® Xeon® Processor IceLake D-1713NTE 4-Core 2.2 GHz COMe Type7 SPI Flash: 64MB x 2 Memory: 32GB DDR4 SO-DIMM with ECC Storage: 240G m.2 2280 NVMe SSD TPM: TPM2.0 SPI ■ BMC: AST2600 with OpenBMC secured by AST1060 Root of Trust ■ Timing and Sync: 1PPS Port, 10 MHz port, ToD port, SyncE, IEEE 1588v2 PTP Performance ■ Switching Capability: 51.2 Tbps full duplex ■ Jumbo Frames: up to 9416 Bytes ■ Subject to NOS: VxLAN RIOT support SRv6 support GLB support Physical and Environmental ■ Weight: 21.5 kg (47.4 lb), with 2 PSUs and 4 fan modules installed ■ Fans: 4 Hot-swappable fan modules with 7+1 redundant fans ■ Storage Temperature: -40°C – 70°C (-40°F – 158°F) ■ Operating Temperature (front-to-back): 0°C – 40°C (32°F – 104°F) ■ Operating Temperature (back-to-front): 0°C – 35°C (32°F – 95°F), *subject to used optics ■ Operating Humidity: 5% – 95% non-condensing ■ Operating Altitude: 1800 m Specifications

Ordering Information

Base Model: AIS800-64O; Intel® Xeon® Processor IceLake D-1713NTE 4-Core 2.2 GHz COMe Type7; 64-Port 800G OSFP800; ONIE Soſtware Installer. Model Number Part Number PSU AirflowP ower Cord AIS800-64O-AF-UN FP6EC9664003Z Dual AC PSUs Front-to-back IEC 60320 C19-C20 power cord AIS800-64O-AF FP6EC9664001Z Dual AC PSUs Front-to-back No power cord AIS800-64O-AB-UN FP6EC9664006Z Dual AC PSUs Back-to-front IEC 60320 C19-C20 power cord AIS800-64O-AB FP6EC9664007Z Dual AC PSUs Back-to-front No power cord AIS800-64O-DF FP6EC9664010Z Dual DC PSUs Front-to-back No power cord AIS800-64O-DB FP6EC9664012Z Dual DC PSUs Back-to-front No power cord Base Model: AIS800-64D; Intel® Xeon® Processor IceLake D-1713NTE 4-Core 2.2 GHz COMe Type7; 64-Port 800G QSFP-DD800; ONIE Soſtware Installer. Model Number Part Number PSU AirflowP ower Cord AIS800-64D-AF-UN FP6EC9664004Z Dual AC PSUs Front-to-back IEC 60320 C19-C20 power cord AIS800-64D-AF FP6EC9664002Z Dual AC PSUs Front-to-back No power cord AIS800-64D-AB-UN FP6EC9664005Z Dual AC PSUs Back-to-front IEC 60320 C19-C20 power cord AIS800-64D-AB FP6EC9664008Z Dual AC PSUs Back-to-front No power cord AIS800-64D-DF FP6EC9664014Z Dual DC PSUs Front-to-back No power cord AIS800-64D-DB FP6EC9664016Z Dual DC PSUs Back-to-front No power cord PSU FRUs (Power Cord Not Included) Model Number Part Number PSU Airflow Region PSU-AC-3000W-F F0TEC9664006Z AC Front-to-Back Worldwide PSU-AC-3000W-B F0TEC9664004Z AC Back-to-Front Worldwide PSU-DC-3000W-F F0TEC9664009Z DC Front-to-Back Worldwide PSU-DC-3000W-B F0TEC9664008Z DC Back-to-Front Worldwide Fan FRUs Model Number Part Number Airflow FAN-2U-1x1SN-F F0TEC9664003Z Front-to-Back FAN-2U-1x1SN-B F0OZZ9664002A Back-to-Front Accessories Model Number Part Number Description RKIT-AI-2-8-SLIDE F0TEC9664007Z Normal installed sliding rail RKIT-AI-2R-8-SLIDE F0TEC9664001Z Reversed installed sliding rail

Please check https://www.edge-core.com/supWP.php for the warranty terms in your country. For More Information To find out more about Edgecore Networks Corporation productsand solutions, visit www.edge-core.com. About Edgecore Networks Corporation Edgecore Networks Corporation is in the business of providing innovative network solutions. In the service provider network, in the data center or in the cloud, Edgecore Networks Corporation delivers the soſtware and systems that transform the way the world connects. Edgecore Networks Corporation serves customers and partners worldwide. Additional information can be found at www.edge-core.com. Edgecore Networks Corporation is a subsidiary of Accton Technology Corporation, the leading network ODM company. The Edgecore data center switches are developed and manufactured by Accton. To purchase Edgecore Networks solutions, please contact your Edgecore Networks Corporation representatives at +886 3 563 8888 (HQ) or +1 (949)-336-6801 or authorized resellers. © Copyright 2025 Edgecore Networks Corporation. The information contained herein is subject to change without notice. This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or service offered by Edgecore Networks Corporation. Edgecore Networks Corporation shall not be liable for technical or editorial errors or omissions contained herein. EC-DS-0725-R03