7726-32X-O-AC-F EDGE-CORE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

The Edgecore DCS204 switch is a Top-of-Rack (TOR) or spine switch for high-performance data centers. In a compact 1RU form factor, the switch provides line-rate L2 and L3 switching across the 32 x QSFP28 ports, and each QSFP28 port can be configured as 2x50G, 4x25G, 1x40GbE or 4x10GbE by using DAC breakout cables. The DCS204 can be deployed as a TOR switch supporting 10/25/50 GbE to servers with 40/50/100 GbE uplinks, or as a spine switch supporting 40/50/100 GbE spine interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System soſtware, including the open source options, plus commercial NOS offerings. Key Features and Benefits ■ Deploy as top-of-rack switch supporting 10 or 25 GbE to servers, with 40 GbE, 50 GbE, or 100 GbE uplinks. ■ Deploy as spine switch supporting 40 GbE, 50 GbE, or 100 GbE ToR and spine interconnects. ■ 32 x QSFP28 switch ports, each supporting 1 x 100 GbE or 1 x 40 GbE, or via breakout cables, 2 x 50 GbE or 4 x 25 GbE or 4 x 10 GbE. ■ Layer 2 or Layer 3 forwarding of 3.2 Tbps. ■ Supports hot/cold aisle with front-to-back and back-to-front airflow SKUs. ■ All ports on front; PSUs and fans accessible from rear. ■ Hot-swappable, load-sharing, redundant AC or -48V DC PSUs. ■ 5+1 redundant, hot-swappable fan modules. ■ Energy efficient. ■ Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of compatible open source and commercial NOS offerings.

Free Soſtware Included

Description

  1. System LEDs 7. Console port 2. Port indicators 8. PSU 2 3. 32 x 100G/QSFP28 ports 9. Hot-Swappable 5 + 1 redundant fans 4. Management port 10. PSU 1 5. 10G management port 11. Grounding point 6. USB storage port 1 2 3 4 5 6 8 9 10 11 11

Soſtware ■ Switch is loaded with Open Network Install Environment (ONIE) soſtware installer ■ Compatible with the following NOS options: open source options, plus commercial NOS offerings. LEDs ■ QSFP 28 Port LEDs: Link Status, Activity, Rate ■ Ethernet Management Port LED: Link Status, Activity ■ System LEDs: Diagnostic, Locator, PSU and Fan Status Regulatory ■ Emissions: CE Mark EN55032 Class A AS/NZS CISPR32 Class A EN61000-3-2 EN61000-3-3 FCC Part 15, Subpart B Class A ICES-003 VCCI Class A CCC Class A BSMI Class A KCC Anatel NOM TEC ■ Immunity: EN 55024 EN 55035 EN 300 386 ■ Safety: CB UL CCC BSMI ■ Environmental: NEBS GR63-CORE (Pre-test) ■ RoHS-2.0 Compliant ■ Electrical and Electronic Equipment (WEEE Directive 2002/96/EC) ■ Country of Origin: Taiwan (TAA Compliant) Warranty Please check www.edge-core.com for the warranty terms in your country. For More Information To find out more about Edgecore Networks Corporation products and solutions, visit www.edge-core.com. About Edgecore Networks Corporation Edgecore Networks Corporation is in the business of providing innovative network solutions. In the service provider network, in the data center or in the cloud, Edgecore Networks Corporation delivers the soſtware and systems that transform the way the world connects. Edgecore Networks Corporation serves customers and partners worldwide. Additional information can be found at www.edge-core.com. Edgecore Networks Corporation is a subsidiary of Accton Technology Corporation, the leading network ODM company. The Edgecore data center switches are developed and manufactured by Accton. To purchase Edgecore Networks solutions, please contact your Edgecore Networks Corporation representatives at +886 3 563 8888 (HQ) or +1 (949)-336-6801 or authorized resellers. © Copyright 2025 Edgecore Networks Corporation. The information contained herein is subject to change without notice. This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or service offered by Edgecore Networks Corporation. Edgecore Networks Corporation shall not be liable for technical or editorial errors or omissions contained herein. Ports ■ Switch Ports: 32 x QSFP28 40/100G GbE ■ Logical Ports: Max. 128 ■ Port Modes: 1 x 100G (4 lanes 25G NRZ) QSFP28 1 x 40G (4 lanes 10G NRZ) QSFP+ 2 x 50G (2 lanes 25G NRZ) QSFP28 breakout 4 x 25G (1 lane 25G NRZ) QSFP28 breakout 4 x 10G (1 lane 10G NRZ) QSFP+ breakout ■ Management Ports on Port Side: 1 x RJ-45 serial console 1 x RJ-45 1000BASE-T management 2 x SFP+ 10G management ports 1 x USB Type A storage ■ Supported Transceivers and Cables: 40GBASE-SR4/LR4 40G-DAC/AOC Cable 100GBASE-SR4/CWDM4/LR4/ER4/ZR4/PSM4-2/DR1/FR1/LR1 100G-DAC/AOC Cable

  • Note: More optics and detailed cabling information can be found at www.edge-core.com. Key Componets ■ Switch Silicon: Broadcom BCM56870 Trident 3 No PHYs ■ CPU Modules: Processor: Intel® Xeon® 4-Core SPI Flash: SPI Flash: 16 MB x 2 Memory: DDR4: SO-DIMM 8 GB x 2 Storage: m2 SSD: 64 GB MLC TPM: TPM1.2 Performance ■ Switching Capacity: 3.2 (6.4) Tbps ■ Forwarding Rate: 2003.4 Mpps ■ Jumbo frames support up to 9416 Bytes ■ Packet Buffer Size: 32 MB ■ Subject to NOS: MAC Addresses: 32 K min./288 K max. VLAN IDs: 4 K IPv4: 16 K min./168 K max. host entries; 32 K LPM entries with TCAM-only mode IPv6: 8 K min./100 K max. host entries; IPv6/128= 8 K TCAM-only mode Physical and Environmental ■ Weight: 10.87 kg (23.96 lb.), with two installed PSUs ■ Fans: Hot-swappable 5+1 redundant fans ■ Storage Temperature: -40°C to 70°C (-40°F to 158°F) ■ Operating Temperature: 0°C to 45°C (32°F to 113°F) ■ Operating Humidity: 5% to 95% non-condensin Power ■ PSUs: 2 redundant, load-sharing, hot-swappable 650W AC or -48 VDC ■ AC PCU: AC input range: 100-240 VAC at 50-60 Hz (6A/650 W max.) AC Inlet: IEC 60320 C14 ■ DC PSU:

48 VDC input ranges:

-36 - -72 VDC (16A/650 W max.) DC Inlet: Positronic PLA03F7000/AA ■ Power Draw: Minimum: 149.8 W Typical: 296.73 W

  • Note: Minimum means idle, no transceivers, no traffic. Typical means 32 x 100G SR4 transceivers with 30% traffic loading at 25°C ambient temperature.

Ordering Information

Base Model: AS7726-32X; Intel® Xeon® Processor 4-Core; 32-Port 100G QSFP28; ONIE Soſtware Installer. Model Number Part Number PSUA irflow Power Cord 7726-32X-O-AC-F FP3ZZ7632074A Dual AC PSUs Front-to-Back without power cord 7726-32X-O-AC-B FP3ZZ7632076A Dual AC PSUs Back-to-Front without power cord 7726-32X-O-AC-F-UN FP3ZZ76320ATA Dual AC PSUs Front-to-Back IEC 60320 C13-C14 7726-32X-O-AC-B-UN FP3ZZ76320AUA Dual AC PSUs Back-to-Front IEC 60320 C13-C14 7726-32X-O-AC-F-US FP3ZZ7632420A Dual AC PSUs Front-to-Back NEMA 5-15 (UL) 7726-32X-O-AC-B-US FP3ZZ7632421A Dual AC PSUs Back-to-Front NEMA 5-15 (UL) 7726-32X-O-AC-F-EU FP3ZZ7632214A Dual AC PSUs Front-to-Back IEC 60083 Type E/F (CEE 7/7) EU 7726-32X-O-AC-B-EU FP3ZZ7632215A Dual AC PSUs Back-to-Front IEC 60083 Type E/F (CEE 7/7) EU 7726-32X-O-AC-F-UK FP3ZZ7632314A Dual AC PSUs Front-to-Back IEC 60083 Type G (BS 1363) UK 7726-32X-O-AC-B-UK FP3ZZ7632315A Dual AC PSUs Back-to-Front IEC 60083 Type G (BS 1363) UK 7726-32X-O-AC-F-JP FP3ZZ7632514A Dual AC PSUs Front-to-Back JIS C 8303, Class I 7726-32X-O-AC-B-JP FP3ZZ7632515A Dual AC PSUs Back-to-Front JIS C 8303, Class I 7726-32X-O-AC-F-CN FP3ZZ7632706A Dual AC PSUs Front-to-Back IEC 60083 Type I (GB 2099.1) CN 7726-32X-O-AC-B-CN FP3ZZ7632707A Dual AC PSUs Back-to-Front IEC 60083 Type I (GB 2099.1) CN 7726-32X-O-AC-F-TW FP3ZZ7632T00A Dual AC PSUs Front-to-Back NEMA 5-15 (BSMI) 7726-32X-O-AC-B-TW FP3ZZ7632T01A Dual AC PSUs Back-to-Front NEMA 5-15 (BSMI) 7726-32X-O-48V-F FP3ZZ76320A0A Dual DC PSUs Front-to-Back without power cord 7726-32X-O-48V-B FP3ZZ76320A2A Dual DC PSUs Back-to-Front without power cord PSU FRUs (Power Cord not included) Model Number Part Number PSUA irflow PSU-AC-650B-F F0TZZ5654019A AC Front-to-Back PSU-AC-650B-B F0TZZ5654020A AC Back-to-Front PSU-AC-650C-F F0TZZ7656002A AC Front-to-Back PSU-AC-650C-B F0TZZ7656003A AC Back-to-Front PSU-48V-650-F F0TZZ7632004A 48VDC Front-to-Back PSU-48V-650-B F0TZZ7632003A 48VDC Back-to-Front FAN FRUs Model Number Part Number Airflow FAN-1U-1x1C-F F0TAO6632000A Front-to-Back FAN-1U-1x1C-B2 F0TZZ7632000A Back-to-Front Accessories Model Number Part Number Description RKIT-100G-SLIDE F0OZZ7632001A Tool-less Rack Mounting Rail Slide Kit (674 mm - 919 mm ±3 mm)