PSTG0-900 MOBILEMARK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com Specifications subject to change without notice (03/2017)Made in the USA
- Sleek profile with small SMA connectors
- Models for GSM/CDMA are backwards compatible to earlier generations
- Tough polyurethane radome resists im- pact damage Device Antennas Quarterwave, 824-2485 MHZ These quarterwave antennas offer high performance with the minimum of size. The sleek profile pairs well with a wide variety of devices. Different single and dual band combinations are offered, providing maximum flexibility. Typical popular dual band combinations include US Cellular GSM/CDMA at 850 & 1900 MHz, and European GSM at 925 & 1800 MHz. Other combinations are available, as specified in the model number table, included the PSTG0-1950/2140 designed to cover UMTS frequency bands. Single band models are offered for US 850 band Cellular, or 902-928 ISM, or EU 925 Band GSM. A single band WiFi model is also available for 2.4 GHz. The antennas are available with an SMA Male connector. In addition, the PSTG-915 is also available with a reverse polarity SMA. The antenna radomes are made from black matt polyure- thane, which provided a protective, waterproof covering. It is a solid material, with some flexibility. Due to their small size and flexible material, these antennas are suitable for wireless devices such as access points, or hand-held portable units. In addition, they are suitable for both consumer and commercial applications. Model Number Freq. Band Dual Band PSTG0-900/1900HKS 824-894 & 1850-1990 MHz PSTG0-925/1800HKS 890-960 & 1710-1880 MHz PSTG0-925/1900HKS 890-960 & 1850-1990 MHz PSTG0-1950/2140HKS 1920-1980 & 2110-2170 MHz Single Band PSTG0-900HKS 824-894 MHz PSTG0-925HKS 870-960 MHz PSTG-915S 902-928 MHz PSTG-915RS 902-928 MHz PSTG0-925SE* 870-960 MHz PSTG0-2400HS 2400-2485 MHz PSTG0-2400HRS 2400-2485 MHz *Min. Order Quantity (MOQ) 250 Units ISM & Cellular PSTG0 Series PSTG-915 Series PSTG0-925SE Series Specifications Frequency: See above Gain: 0 dBi max VSWR: 2:1 max over range Impedance: 50 Ohm nominal Maximum Power: 5 Watts Operating Temp: -40 oC to +85oC Radome Material: Polyurethane; black matt finish Connector: SMA Plug (male) except PSTG-915RS & PSTG0-2400HRS with Rev Polarity SMA plug Whip Length: PSTG0 Series 1.6 inches (41 mm) PSTG-915 Series 3.2 inches (81 mm) PSTG0-925SE 2.875 inches (73 mm) PSTG0-2400HS 1.0 inches (25 mm) Water Ingress: IPx5 As quarterwave antennas, the ground plane in the device influences the performance of these antennas. The specific radiation characteristics depend on the total configuration of the unit when interfaced with the antenna. A number of factors can influence the radiation characteris- tics of the antenna such as how the wireless device is handled or where the device is mounted. A ground plane is required for optimum performance. PSTG0- 2400