PSOT03 PROTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

05059.R7 4/05 www.protekdevices.com STANDARD CAPACITANCE TVS ARRAY Only One Name Means ProTek’Tion™

APPLICATIONS

✔ RS-232, RS-422 & RS-423 ✔ Cellular Phones ✔ Control & Monitoring Systems ✔ Portable Electronics ✔ Wireless Bus Protection IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Ground) & Level 3(Line-Line)

FEATURES

✔ ESD Protection > 40 kilovolts ✔ 500 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Low Clamping Voltage ✔ Available in Multiple Voltage Types Ranging from 3V to 36V ✔ Unidirectional & Bidirectional Configurations ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOT-23 ✔ Weight 8mg (Approximate) ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Device Marking: Marking Code 05059 PIN CONFIGURATION SOT-23 UNIDIRECTIONAL BIDIRECTIONAL

www.protekdevices.com 05059.R7 4/05 PSOT03 thru PSOT36C DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified Operating Temperature SYMBOL VALUE -55°C to 150°C -55°C to 150°C UNITS TJ TSTG PARAMETER Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Watts Forward Voltage @ 100mA, 300µs - Square Wave (Note 1) VF 1.5 Volts Note 1: Applies to unidirectional devices only. Note 1: Part numbers with an additional “C” suffix are bidirectional devices, i.e., PSOT05C. ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) DEVICE MARKING MINIMUM BREAKDOWN VOLTAGE @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @8/20µs VC @ IPP TYPICAL CAPACITANCE @0V, 1 MHz C pF PSOT03 PSOT03C PSOT05 PSOT05C PSOT08 PSOT08C PSOT12 PSOT12C PSOT15 PSOT15C PSOT24 PSOT24C PSOT36 PSOT36C 03C 05C 08C 12C 15C 24C 36C 4.0 4.0 6.0 6.0 8.5 8.5 13.3 13.3 16.7 16.7 26.7 26.7 40.0 40.0 6.5 7.0 9.8 9.8 13.4 13.4 19.0 19.0 24.0 24.0 43.0 43.0 51.0 51.0 10.9V @ 43.0A 10.9V @ 43.0A 13.5V @ 42.0A 13.5V @ 42.0A 16.9V @ 34.0A 16.9V @ 34.0A 25.9V @ 21.0A 25.9V @ 21.0A 30.0V @ 17.0A 30.0V @ 17.0A 49.0V @ 12.0A 49.0V @ 12.0A 76.8V @ 9.0A 76.8V @ 9.0A 500 300 350 210 250 150 150 100 MAXIMUM LEAKAGE CURRENT @VWM ID µA 125 125 RATED STAND-OFF VOLTAGE VWM VOLTS 3.3 3.3 5.0 5.0 8.0 8.0 12.0 12.0 15.0 15.0 24.0 24.0 36.0 36.0

www.protekdevices.com 05059.R7 4/05 PSOT03 thru PSOT36C COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. PACKAGE OUTLINE & DIMENSIONS ProTek Devices

2929 South Fair Lane, Tempe, AZ 85282

Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PSOT05-T7. 3. Suffix -T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., PSOT05-T13. 4. Suffix - LF = Lead-Free, Pure Tin Plating, i.e., PSOT24C-LF-T7. Outline & Dimensions: Rev 1 - 11/01, 06012 A L B S G D H V J C K 0º - 10º A B C D G H J K L S V 2.80 1.20 0.89 0.37 1.78 0.013 0.085 0.45 0.89 2.10 0.45 3.04 1.40 1.11 0.50 2.04 0.100 0.177 0.60 1.02 2.50 0.60 0.1102 0.0472 0.0350 0.0150 0.0701 0.0005 0.0034 0.0180 0.0350 0.0830 0.0177 0.1197 0.0551 0.0440 0.0200 0.0807 0.0040 0.0070 0.0236 0.0401 0.0984 0.0236 DIM MIN MAX MIN MAX MILLIMETERS INCHES PACKAGE DIMENSIONS NOTES 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Pin 3 is the cathode (Unidirectional Only). 4. Dimensions are exclusive of mold flash and metal burrs. PACKAGE OUTLINE SOT-23 MOUNTING PAD 0.037” (0.95mm) 0.033” (0.85mm) 0.079” (2.00mm) 0.033” (0.85mm)