PSKN3-900T MOBILEMARK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com Specifications subject to change without notice (10/2018) Whip Length 90o : 900 & 925 Series 7.9” (201mm) when right angle 1800 & 1900 Series 6.5” (165 mm)when right angle PSN3 Series Straight only Right Angle Standoff: 1.25” (32 mm) inside elbow 1.75” (45 mm) outside elbow Shock & Vibration: PSKN3 & PSN3 EN 61373, IEEE 1478, MIL-810G, TIA-329.2-C Water Ingress: PSKN3: IPx5; PSN3: IPx7
- Up to 2.3 dBi gain styles with semi-flexible radome and adjustable knuckle
- Halfwave design requires no ground plane
- Sleek molded profile, with a choice of SMA or TNC connectors Device Antennas, Halfwave Single-band 806-1990 MHz These halfwave antennas require no ground plane for opera- tion. This makes them ideal for use with portable devices or products with no substantial ground plane. They can even be used with products that consist of all plastic chassis or case. The PSKN Series antennas use a full length center fed dipole configuration. A knuckle feature allows the antenna to be adjusted between a straight position, to a 90o right angle po- sition. This is useful for products that may need to be placed both horizontal and vertical, or where the connector is placed on the side of a radio device. The PSN3 Series antennas offer the same electrical character- istics as the PSKN3 antennas, but they have a permanently fixed straight position. Maximum radiation is achieved along the horizon, and band- width provided is substantial. VSWR is typically 2:1 or better over the desired frequency range. The antennas are available in many popular frequency bands. The radome is made of flexible Polyurethane. Standard con- nector styles available include TNC or SMA. For FCC part 15 compliance, select models offer reverse polarity connectors. Both Series meet industrial and military shock & vibration specs. the PSKN3 Series is rate IPx5 for water ingress. The PSN3 has a higher water-resistance and is rated IPx7. Specifications Frequency: See above Gain: 2.3 dBi max VSWR: 2:1 over band Impedance: 50 Ohm nominal Maximum Power: 10 Watts Connector: See models above Whip Length Straight: 900 & 925 Series 9” (229 mm) when straight 1800 & 1900 Series 7.8” (198 mm) when straight Case Material: Polyurethane Operating Temp: -40 o to +85o C PSKN Adjustable Series PSN3 Fixed Straight Model SMA (L) & TNC (R) Versions Model # Application Frequency TNC Plug (Male) Connectors PSKN3-900T US Cellular 806-894 MHz PSKN3-925T EU GSM/ISM 915 870-960 MHz PSKN3-1800T EU DCS-1800 1710-1880 MHz PSKN3-1900T US 1.9 GHz PCS 1850-1990 MHz PSN3-925T ISM 915 band 870-960 MHz PSN3-900T US Cellular 806-894 MHz PSN3-915T ISM 915 band 870-960 MHz PSN3-1800T EU DCS-1800 1710-1880 MHz SMA Plug (Male) Connectors PSKN3-900S US Cellular 806-894 MHz PSKN3-925S EU GSM/ISM 915 870-960 MHz PSKN3-1800S EU DCS-1800 1710-1880 MHz PSKN3-1900S US 1.9 GHz PCS 1850-1990 MHz PSN3-925S ISM 915 band 870-960 MHz PSN3-1800S EU DCS-1800 1710-1880 MHz PSN3-1900S US 1.9 GHz PCS 1850-1990 MHz PSN3-900S US Cellular 806-894 MHz Rev SMA Plug (Male) Connectors PSKN3-925RS ISM 915 band 870-960 MHz PSN3-925RS ISM 915 band 870-960 MHz Rev TNC Plug (Male) Connectors PSKN3-925RT ISM 915 band 870-960 MHz PSN3-925RT ISM 915 band 870-960 MHz