PSM712 PROTEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
STANDARD CAPACITANCE TVS ARRAY 105094.R5 2/07 www.protekdevices.com
APPLICATIONS
✔ RS-485 Transceivers ✔ Network Interfaces ✔ Wireless Systems ✔ Portable Electronics IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Ground) & Level 3(Line-Line)
FEATURES
✔ ESD Protection > 40 kilovolts ✔ 600 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Asymmetrical Data Line Protection ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOT-23 Package ✔ Weight 8 milligrams (Approximate) ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code 05094 SOT-23 PIN CONFIGURATION /MT50 /MT51 /MT49
205094.R5 2/07 www.protekdevices.com PSM712 DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified Operating Temperature SYMBOL V ALUE -55 to 150 °C °C-55 to 150 UNITS TL TSTG PARAMETER Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 600 Watts MAXIMUM RATINGS @ 25°C Unless Otherwise Specified Note 1: For 7V, pin 3 is positive. For 12V, pins 1 and 2 are positive. PART NUMBER (See Note 1) DEVICE MARKING CODE (See Note 2) MINIMUM BREAKDOWN VOLTAGE @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @8/20µs VC @ IPP TYPICAL CAPACITANCE @0V, 1 MHz C pF Pin 3-1 & 3-2 Pin 1-3 & 2-3 712 712 7.5 13.3 11.0 19.0 17V @34A 30V @ 30A MAXIMUM LEAKAGE CURRENT @VWM ID µA RATED STAND-OFF VOLTAGE VWM VOLTS 7.0 12.0 Note 2: Marking code applies to same device.
305094.R5 2/07 www.protekdevices.com PSM712 SOT-23 PACKAGE OUTLINE & DIMENSIONS COPYRIGHT © ProT ek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the s election or specifications of such products. ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com A L B S G D H V J C K 0º - 10º A B C D G H J K L S V 2.80 1.20 0.89 0.37 1.78 0.013 0.085 0.45 0.89 2.10 0.45 3.04 1.40 1.11 0.50 2.04 0.100 0.177 0.60 1.02 2.50 0.60 0.1102 0.0472 0.0350 0.0150 0.0701 0.0005 0.0034 0.0180 0.0350 0.0830 0.0177 0.1197 0.0551 0.0440 0.0200 0.0807 0.0040 0.0070 0.0236 0.0401 0.0984 0.0236 DIM MIN MAX MIN MAX MILLIMETERS INCHES PACKAGE DIMENSIONS NOTES 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Pin 3 is the cathode (Unidirectional Only). 4. Dimensions are exclusive of mold flash and metal burrs. PACKAGE OUTLINE SOT-23 MOUNTING PAD 0.037” (0.95mm) 0.033” (0.85mm) 0.079” (2.00mm) 0.033” (0.85mm) TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PSM712-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., PSM712-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PSM712-LF-T7. Outline & Dimensions: Rev 1 - 11/01, 06012