PSM10 ADVANCEDENERGY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
©2019 Advanced Energy Industries, Inc. The HiTek Power PSM10 series is a range of versatile high voltage component power supply modules equally suited to both laboratory and development work, as well as for specification in OEM equipment. Powered from 24 VDC, these units allow full range control and monitoring of voltage and current via 0 to 10 V analog signals and inhibit signal input. Positive or negative polarity models up to 15 kV are available with customer-defined derivatives upon request. HITEK POWER PSM10 SERIES PRECISION SCIENTIFIC POWER SUPPLY MODULES
FEATURES
10 W output power V and I control V and I monitor Output inhibit High stability Short circuit and flashover protected RoHS compliant to EU Directive 2011/65/EU CE marked (LVD) TYPICAL APPLICATIONS Photomultipliers Gamma cameras Image scanners Spectroscopy Scintillation counters Microchannel plates Piezo crystal devices Ultrasonic transducers Electron beam deflection Electrorheological fluids Electrostatic lenses (SEMs and STMs)
Output Power 10 W at full rated output voltage and current Output Voltage 10 V to 1 kV to 150 V to 15 kV max depending on model (see table) Output Current 667 μA to 10 mA max depending on model (see table) Input Voltage 24 VDC Input Current 1 A max Output Polarity Positive or negative to order Line Regulation < 0.005% change in output voltage over range 22 to 26 V at rated output power Voltage Load Regulation < 0.005% change in output voltage for change in output current from 0 to max output current at rated output voltage Ripple 20 mV to 1 V peak to peak depending on model (see table) Voltage Control Voltage demand: 0 to 10 V for 0 to max output voltage ±2% Input impedance: 22 kΩ (±1%) Using DAC or OP-AMP: connect output of Digital to Analog Converter (DAC) or Operational Amplifier to pin 8 and 0 V to pin 6 Using a potentiometer and internal reference: connect the high end (clockwise) of potentiometer to pin 9, connect low end (counter clockwise) of potentiometer to pin 6, connect wiper of potentiometer to pin 8 Using a potentiometer and external 10 V reference: connect the high end (clockwise) of potentiometer to external 10 V reference, connect low end of potentiometer (counter clockwise) to pin 6 and external 10 V reference return, connect wiper of potentiometer to pin 8 Using single fixed resistor: connect a resistor between pin 9 and pin 8 using the internal impedance (22 kΩ ±1%) as potential divider Using two fixed resistors: connect a resistor between pin 9 and pin 8, connect an additional resistor between pin 8 and Pin 6. Note: internal impedance 22 kΩ (±1%) Current Control Current demand: 0 to 10 V for 0 to max output current ±2% Note: if left open, circuit supply assumes max current capability Input impedance: 1 MΩ internal pull-up, to a +15 V rail Using DAC or OP-AMP: connect output to digital to analog converter (DAC) or operational amplifier to pin 4 and 0 V to pin 6 Using potentiometer and internal reference: connect the high end (clockwise) of potentiometer to pin 9, connect low end (counter clockwise) of potentiometer to pin 6, connect wiper of potentiometer to pin 4 Using two fixed resistors: connect a resistor between pin 9 and pin 4, connect an additional resistor between pin 4 and pin 6 Voltage Monitors Voltage: 0 to 10 V ±2% or ±100 mV, whichever is greater, for 0 to max output voltage Output impedance: 10 KΩ ±1% 2 advancedenergy.com HITEK POWER PSM10 SERIES
Current Monitors Current: 0 to 10 V ±2% or ±100 mV, whichever is greater, for 0 to max output current Output impedance: 10 KΩ ±1% Inhibit Disable: 0 to 0.8 V = OFF Enable: 2.2 to 24 V = ON; Open circuit = ON Stability < 50 ppm per hour at constant ambient temperature and rated output power after 1 h warmup Temperature Coefficient < 50 ppm per °C at max output power Operating Temperature 0 to 50°C (32 to 122°F) at up to 90% RH non-condensing Storage Temperature -20 to +70°C (-4 to 158°F) Altitude Sea level to 2000 m (6500ft) Reliability Mean time between failure (MTBF) > 100,000 hours In accordance with MIL-HDBK-217F Protection Protected against continuous short circuit and flashover Safety Meets the requirements of the Low Voltage Directive, 2014/35/EU, by complying with BS EN60950 when installed as a component part of compliant equipment. Units are CE marked accordingly. RoHS Meets the requirements of EU Directive 2011/65/EU on the Restriction of use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS). ELECTRICAL SPECIFICATIONS (CONTINUED) advancedenergy.com 3 HITEK POWER PSM10 SERIES
Dimensions See outline drawing Weight PSM10/102 and PSM10/202 0.4 kg (0.88 lb) All other models 0.7 kg (1.54 lb) Construction Fabricated alloy with black painted finish Earthing Case internally connected to 0 V Output Connection 600 mm long screened flying lead (see drawing) 0.4 kg UNIT PSM10/102 PSM10/202 4 advancedenergy.com HITEK POWER PSM10 SERIES
MECHANICAL SPECIFICATIONS (CONTINUED) INHIBIT I CONTROL +24V INPUT +10V REF V CONTROL I MONITOR 0V POWER 0V SIGNAL V MONITOR 41 (1.61) 600 (23.62) 70 (2.76) 172 (6.77) 185 (7.28) DIA 4 (0.16) 94 (3.70) 41 (1.61) 0.7 kg UNIT PSM10/502 PSM10/103 PSM10/153 SERIES PSM10 advancedenergy.com 5 HITEK POWER PSM10 SERIES
9-way, male D-type connector fitted to module: +22 V to +26 VDC INPUT SUPPLY CURRENT CONTROL INHIBIT CURRENT MONITOR
0 V POWER
10 V REFERENCE
0 V SIGNAL
The above pinout diagram is view looking at the connector pins. 6 advancedenergy.com HITEK POWER PSM10 SERIES
ORDERING INFORMATION
For ordering information and to find a solution for your exact requirements, please contact your local Advanced Energy sales representative. advancedenergy.com 7 HITEK POWER PSM10 SERIES
For international contact information, visit advancedenergy .com. HVSales@aei.com +1.970.221.0108 ENG-HV-PSM10-235-02 5.19 ABOUT ADVANCED ENERGY Since 1981, Advanced Energy (AE) has perfected how power performs for its customers. For both end users and OEMs, AE’s comprehensive portfolio of standard and custom high voltage components precisely match system specifications to deliver unparalleled energy, quality, and performance. Through close customer collaboration, design expertise, application insight, and world-class support, AE creates successful partnerships and enables customers to push the boundaries of innovation and stay ahead of evolving market needs. PRECISION | POWER | PERFORMANCE Read and understand all documentation before you install, operate, or maintain Advanced Energy high voltage power supplies. Follow all safety instructions and precautions to protect against property damage and serious or possibly fatal bodily injury. Never defeat safety interlocks or grounds. CAUTION: High Voltage Specifications are subject to change without notice. Not responsible for errors or omissions. ©2019 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE®, and HiTek Power® are U.S. trademarks of Advanced Energy Industries, Inc.