PSH DDK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
http://www.ddknet.co.jp ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. PSH Series Compact Coaxial Connector 141028 SPECIFICATIONS
APPLICATIONS
・Wireless LAN, Portable PC, Mobile Phone, Measurement Equipments, Bluetooth. 1.5 1.4 1.3 1.2 1.1 1.0 0 1 2 3 4 5 6 VSWR PSH-LP-OD1.13-CR3 （L=250mm, both ended harness） DC to 6 GHz VSWR Frequency〔GHz〕 1.5 1.4 1.3 1.2 1.1 1.0 0 1 2 3 4 5 6 PSH-LP-OD0.81-CR3 （L=250mm, both ended harness） DC to 6 GHz VSWR VSWR Frequency〔GHz〕 嵌合高さ レセプタクル プラグ2.5 PSH-LP-OD0.81-CR3 PSH-LP-OD1.13-CR3 PSH-LP-OD1.32-CR3 PSH-LP-OD1.37-CR3 2.5 PSH-LP-OD1.32-CR3 PSH-LP-OD1.37-CR3 Receptacle Plug Receptacle Plug Mating Height Frequency Range DC to 6GHz 50 Ω Characteristic Impedance DDK’s PSH compact miniature coaxial connector provides the optimal balance of performance and size. This surface mounted (SMT) RF connector with VSWR performance of 1.3 at DC to 3GHz and VSWR of 1.5 at 3 GHz to 6 GHz and a stacking height of 2.0mm or 2.5mm. This low cost connector is suitable for wireless LAN applications based upon IEEE 802-11a. OUTLINE ・Applicable frequency ranges DC to 3GHz or 3GHz to 6GHz ・Applicable 50 ohm coaxial cable sizes are φ 0.81mm φ 1.13mm φ 1.32mm and φ 1.37mm ・Compact and low profile mated height of 2.0mm or 2.5mm ・30 mate/demate cycles ・Custom cable lengths available ・Applicable for IEEE 802.11a applications ・Tape and reel package ・RoHs Compliant FEATURE Characteristic Impedance 50 Ω Rated Volatge 60VAC(r.m.s.) Dielectric Withstanding Voltage 200V AC(r.m.s.) / 1 minute Insulation Resistance 500M Ω Mim. at 100V DC Contact Resistance Contact : 20m Ω max. Outer conductor : 10m Ω max. 1.5 max. at 3 to 6GHz Operating Temperature -40 〜 +85℃ ＊ The specifications are typical but may not apply to all connectors. Please check the specifications on each item with its drawing from us when you use. 0 1 2 3 4 5 6 1.5 1.4 1.3 1.2 1.1 1.0 PSH-LP-OD1.32-CR3 （L=250mm, both ended harness） DC to 6 GHz VSWR 0 1 2 3 4 5 6 1.5 1.4 1.3 1.2 1.1 1.0 PSH-LP-OD1.37-CR （L=250mm, both ended harness） DC to 6 GHz VSWR Frequency〔GHz〕 VSWRVSWR Frequency〔GHz〕 0 1 2 3 4 5 6 1.5 1.4 1.3 1.2 1.1 1.0 PSH-LP-OD1.32-CR3 （L=250mm, both ended harness） DC to 6 GHz VSWR 0 1 2 3 4 5 6 1.5 1.4 1.3 1.2 1.1 1.0 PSH-LP-OD1.37-CR （L=250mm, both ended harness） DC to 6 GHz VSWR Frequency〔GHz〕 VSWRVSWR Frequency〔GHz〕
http://www.ddknet.co.jp ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. Unit：mm ○ Receptacle Applicable Cable Part Number Outer Conductor Finish Dia. φ 1.13 PSH-LP-OD1.13-CR3 Au Dia. φ 0.81 PSH-LP-OD0.81-CR3 Au ○ Plug Cable Assmbly Part Number Outer Conductor Finish Quantity PSH-SR-PS-1000 Au Reel Package 1000pcs./reel PSH-SR-PS-5000 Au 5000pcs./reel ↑2N →4N ↓2N PCB Monting Dimensions SIG GND 3.1 2.6 1.8 1.25 SIG 0.5 2.6 GNDGND 1.7 2.8 (5.5) (4.2) 100 150 200 230 260 Temperature[℃] Pre-heating 150～200℃ 60～120sec 230℃ min. 30～35sec MAX ： 260℃ Time[sec] Unmating Tool ⇒ ①Insert ⇒②Pull off vertically Ｌ Pattern Prohibited Area (11.6)六角対辺幅 4±0.05 1.9±0.05 1±0.05 1.05±0.05 2.2±0.05 1±0.05 Receptacle Plug ※ Tape and reel package 1.7 (5.8) (4.5) 2.82.1 (6.3) (5) PSH-LP-OD0.81-CR3 PSH-LP-OD1.13-CR3 PSH-LP-OD1.32-CR3 PSH-LP-OD1.37-CR3 新 ※ Plug connector is available in only cable assembly. Cable Size Center Conductor Insulator Outer Conductor Cable Dia. Characteristic Impedance Attenuation max.(dB/m) 3GHz 6GHz O.D. φ 1.13 7/0.08（AWG32） φ 0.7 Single Braid φ 1.13 50 Ω 4.0 5.7 Ag Plating FEP Sn Plating FEP O.D. φ 0.81 7/0.05（AWG36） φ 0.4 Single Braid φ 0.81 50 Ω 6.2 9.4 Ag Plating FEP Sn Plating FEP Applicable Cable Size 3P)4 $PNQMJBOU 3P)4 $PNQMJBOUMATERIAL/ FINISH Item Material / Finish Receptacle Outer Conductor Copper Alloy / Au Plating Contact Copper Alloy / Au Plating Insulator Thermoplastic Resin / Ivory 3P)4 $PNQMJBOU 3P)4 $PNQMJBOUMATERIAL/ FINISH Item Material / Finish Plug Outer Conductor Copper Alloy / Au Plating Contact Copper Alloy / Au Plating Insulator Thermoplastic Resin / Black
http://www.ddknet.co.jp ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. Unit：mm ○ Plug Cable Assmbly Applicable Cable Part Number Outer Conductor Finish Dia. φ 1.32 PSH-LP-OD1.32-CR3 Au Dia. φ 1.37 PSH-LP-OD1.37-CR3 Au ※ Plug connector is available in only cable assembly. Cable Size Center Conductor Insulator Outer Conductor Cable Dia. Characteristic Impedance Attenuation max.(dB/m) 3GHz 6GHz O.D. φ 1.32 7/0.08（AWG32） φ 0.7 Double Braid φ 1.32 50 Ω 3.7 5.4 Ag Plating FEP Sn Plating FEP O.D. φ 1.37 7/0.105（AWG30） φ 0.9 Single Braid φ 1.37 50 Ω 3.0 4.7 Ag Plating FEP Sn Plating FEP Applicable Cable Size 3P)4 $PNQMJBOU 3P)4 $PNQMJBOUMATERIAL/ FINISH Item Material / Finish Plug Outer Conductor Copper Alloy / Au Plating Contact Copper Alloy / Au Plating Insulator Thermoplastic Resin / Black ○ Adaptor（SMA plug to PSH jack） DMP-SA-PSHJ 表1.コネクタ角度表 ケーブル長Ｌ 標準公差 25≦L≦200 ±3 200＜L≦500 ±5 500＜L≦1000 ±10 1000＜L ±1.5％ 表2.ケーブル長公差表 (10.5)Hex Dia. Connector Angle 2Connector Angle １ Connector Angle 3 Connector Angle 4 1.7 (5.8) (4.5) 2.82.1 (6.3) (5) PSH-LP-OD0.81-CR3 PSH-LP-OD1.13-CR3 PSH-LP-OD1.32-CR3 PSH-LP-OD1.37-CR3 新 3P)4 $PNQMJBOU 3P)4 $PNQMJBOUMATERIAL/ FINISH Item Material / Finish Adaptor Outer Conductor SUS(304) Contact Copper Alloy / Au Plating Insulator PTFE
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. Table 2. Connector Angle Table 3. Cable Length Table 1. Cable / Plating
http://www.ddknet.co.jp ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. Unit：mm ○ Instruction Manual ↑2N (Max.) →4N (Max.) ↓2N (Max.) 新 Pull-off Tool ① Insert ② Pull off vertically ↑2N (Max.) →4N (Max.) ↓2N (Max.) 新 Pull-off Tool ① Insert ② Pull off vertically When mating the connector, please insert the connector along the center conductor. When unmating the connector, please pull off vertically by using below tool Excessive torsional mating causes to be broken. ・Allowable cable load at mating Do not add the load more than right figure. ○ Reflow Temperature Profile ↑2N（Max.) →4N（Max.) ↓2N（Max.) Pull-off Tool ⇒ ①Insert ⇒②Pull off vertically 100 150 200 230 260 Temperature[℃] Pre-heating 150～200℃ 60～120sec 230℃ max. 30～35sec MAX ： 260℃ Time[sec] ※ Above reflow temperature plofile can be fluctuated by sort of the solder paste. Please test the soldering temperature beforehand. ※ The temperature is measured at the terminal area. ※ Reflow cycle is up to twice.