PSGSERIES NPC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations. Downsized PSG PSF CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS ˔Super low ESR, high ripple current capability ˔Endurance: 2,000 to 5,000 hours at 105ˆ ˔Rated voltage : 16 to 20Vdc ˔RoHS Compliant ˔Halogen Free ˗SPECIFICATIONS (at 20ˆ, 120Hz) (at 105ˆ) (at 20ˆ after 2 minutes) (at 20ˆ, 120Hz) (at 100kHz) Category Temperature Range Rated Voltage Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tanЎ) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate Items -55 to +105ˆ 16 to 20Vdc P20% (M) Rated voltage(V)B1.15 I=0.2CV or 500μA, whichever is greater Where, I : Leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) 0.12 max. Z(-25ˆ)/Z(+20ˆ)ʽ1.15 The following specifications shall be satisfied when the capacitors are restored to 20ˆ after the rated voltage is applied for 5,000 hours (20V : 2,000 hours) at 105ˆ. Appearance No significant damage Capacitance change ʽʶ20% of the initial value D.F. (tanЎ) ʽThe initial specified value ESR ʽ150% of the initial specified value Leakage current ʽThe initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 ˆ after subjecting them to DC voltage at 60 ˆ, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ʽʶ20% of the initial value D.F. (tanЎ) ʽThe initial specified value ESR ʽ150% of the initial specified value Leakage current ʽThe initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 ˆ for 30 seconds through a protective resistor(R=1 kЊ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change D.F. (tanЎ) ESR Leakage current 0.5% per 1,000 hours maximum (Confidence level 60% at 105ˆ) Characteristics *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105ˆ. Z(-55ˆ)/Z(+20ˆ)ʽ1.25 ʽʶ20% of the initial value ʽThe initial specified value ʽ150% of the initial specified value ʽThe initial specified value New! Radial Lead CAT. No. E1001L(1/2)
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations. ˗PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Capacitance code (ex. 150F:151) Lead forming·Taping code Terminal code Voltage code (ex. 16V:160,20V:200) Series code Category A P S G E SM 13 4 2 6 7 8 9 10 13 1251 8 171611 15 14 ˗STANDARD RATINGS ˘˘ : Enter the appropriate lead forming or taping code. Please refer to “Product code guide (conductive polymer type)” ˗DIMENSIONS [mm] ˗MARKINGSize code ПD Пd F ПD' F05 0.45 F08 6.3 2.5 H06 H08 8.0 0.6 3.5 HB5 JB5 10.0 5.0 L+1.5max.L+1.0max. /g307D+0.5max. Coated Case L' 15min. 4min. ПD' Пd Fʶ0.5 Fʶ0.5 Coated Case L' 15min. 4min. ПD' Пd F05,F08,H06,H08 HB5,JB5 G 6D6 150 16V EX) 16V150/g151F ˔Terminal Code : E WV(Vdc) 150 270 270 470 560 820 1,000 6.3 6.3ʷ8 8ʷ6 8ʷ8 8ʷ11.5 10ʷ11.5 10ʷ11.5 3,200 3,800 3,300 4,000 4,970 5,400 5,400 APSG160E ˘˘151MF05S APSG160E˘˘271MF08S APSG160E˘˘271MH06S APSG160E˘˘471MH08S APSG160E˘˘561MHB5S APSG160E˘˘821MJB5S APSG160E˘˘102MJB5S 120 6.3 ʷ5 20 3,200 APSG200E ˘˘121MF05S Cap(F) Case size ПDʷL(mm) ESR (mЊ max./20ˆ, 100k to 300kHz) Rated ripple current (mArms/105ˆ, 100kHz) Part No. CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS New! Radial Lead CAT. No. E1001L(2/2)