PSG90850 PROSIGNAL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Page <1> V1.030/09/21 Cat6 Ethernet Patch Cord RJ45 Plug to RJ45 Plug Newark.com/exclusive-brands Farnell.com/exclusive-brands Element14.com/exclusive-brands Specifications Connector to Connector : RJ45 Plug to RJ45 Plug LAN Category : Cat6 Cable Length : 200mm (7.9″) Jacket Colour : Grey Diagram Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. pro - SIGNAL is the registered trademark of Premier Farnell Limited 2019. Part Number Table Description Part Number Ethernet Cable, Patch Lead, Cat6, RJ45 Plug to RJ45 Plug, Grey, 200m PSG90850 Note: Material Cable: 24AWG (7/0.18CU)×4 Pair+Filler+PVC Jacket Connector: RJ45 (8P8C) Male Cat6 Type, Two Piece Insulation: Clear Polyester, UL94V-2 Contacts: Brass, Gold Plated 3µ PVC Molded: PVC Dimensions : Millimetres Tolerances: ±30mm