PSG480B24RM EATON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
11/17/2016 172887 - HPL-ED2016 V27.0 EN 1 / 4 BuffermoduleforPSGpowersupplyunit,20A Partno. PSG480B24RM Articleno. 172887 CatalogNo. PSG480B24RM Deliveryprogram Product range Power supplies PSG Subrange Buffer module Description For maintaining operation during brief power failures; the backup time can be multiplied by connecting in parallel Backup time depends on load current 250 ms (20 A) to max. 5 s (1 A) Input voltage range 22,8 - 28,8 V DC Nominal input voltage 24 V DC Rated output voltage Typically 24 VDC (depends on Vin) Rated output current A 20 Setting range for the output voltage 22 - 28 V DC Switch = "Fixed 22 V" : Back-up starts when the terminal voltage falls below 22 V Switch = "Vin - 1 V" (default setting): Back-up starts when the terminal voltage drops by more than 1 V Technicaldata Inputcharacteristics Nominal input voltage 24 V DC Input voltage range V 22.8 - 28.8 V DC Maximum input voltage V DC 35 Input current A Charging mode: < 0.6 A Discharging mode: Max. 20 A Maximum input signal (Inhibit = Blocking) 35 V 10 mA Maximum inrush current A < 20 A Charging time sec < 30 sec Back-up fuse 3 x 6, 10, 16 A (recommended) Outputcharacteristics Rated output voltage Typically 24 VDC (depends on Vin) Setting range for the output voltage 22 - 28 V DC Switch = "Fixed 22 V" : Back-up starts when the terminal voltage falls below 22 V Switch = "Vin - 1 V" (default setting): Back-up starts when the terminal voltage drops by more than 1 V Maximum output voltage 35 V DC Nominal current A max. 20 Back-up time ms > 250 ms with 24 V / 20 A load > 5 sec with 24 V / 1 A load Maximum signal output 35 V DC 10 mA Signals Inhibit signal (I) = "Low": Switches off the buffer module Ready signal (R) = "High": Buffer module is fully charged or in standby mode Buffering signal (B) = "High": Buffer module is discharging or is in buffer mode Supply voltage (+Vs): 10 - 35 VDC Heat dissipation W 3 Residual ripple (20 MHz) < 200 mVpp Can be switched in parallel Yes Series connection capability No Generalcharacteristics Housing Aluminium Status indication Green LED off: Device is out of charge or Vin < 22 V Green LED on: Device is fully charged Green LED flashing slowly (1 Hz): Device currently charging Green LED flashing quickly (10 Hz): Device currently discharging MTBF (mean time between failures) > 800,000 h Height mm 121
11/17/2016 172887 - HPL-ED2016 V27.0 EN 2 / 4 Width mm 70 Depth mm 120.1 Weight kg 0.76 Terminations Screw connection Stripping length mm 7 Terminal capacity flexible with ferrules/solid mm2 Input / output: 3.3 - 5.3 mm² (AWG 12 - 10) Signal: 0.1 - 5.3 mm² (AWG 24 - 10) Tightening torque Nm 0.7 Ambient air temperature range °C Operation °C -25 - +75 damp heat < 95 % relative humidity at +25 °C, no condensation Vibrations (IEC/EN 60068-2-6) 10 - 500 Hz at 30 m/s² (3 G max ) for 60 min. in X-axis, Y-axis, Z-axis directions Mechanical shock resistance (IEC 60068-2-27) 30 g (300 m/s²) in all directions Safetyandsafetyfeatures Insulation voltage Input/PE 1.5 kV AC Output/PE 1.5 kV AC Signal/PE 1.5 kV AC Degree of Protection IP20 Protection class Class I with PE connection Standards Electrical equipment of machines: IEC 60204-1 Electronic devices for use in electrical systems: EN 50178/IEC 62103 Safety extra-low voltage: PELV (EN 60204), SELV (EN 60950) Protection against electric shock: DIN 57100-410 CE: In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC RoHS-compliant: RoHS Directive 2011/65/EU ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024 Industrial: EN 55011 Mains harmonics limitation: EN 601000-3-2 Electrical safety (of IT equipment) : UL/c-UL recognized as per UL 60950-1 and CSA C22.2 No. 60950-1, SIQ BG as per EN 60950-1, CB test report as per IEC 60950-1 and CE Industrial control equipment: UL/c-UL listed as per UL 508 and CSA C22.2 Component power supply unit for general use: EN61204-3 DesignverificationasperIEC/EN61439 Technical data for design verification Rated operational current for specified heat dissipation In A 0 Heat dissipation per pole, current-dependent Pvid W 0 Equipment heat dissipation, current-dependent Pvid W 0 Static heat dissipation, non-current-dependent Pvs W 3 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max. °C 75 IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance Meets the product standard's requirements. 10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements. 10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects Meets the product standard's requirements. 10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard's requirements. 10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated. 10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated. 10.2.7 Inscriptions Meets the product standard's requirements. 10.3 Degree of protection of ASSEMBLIES Meets the product standard's requirements. 10.4 Clearances and creepage distances Meets the product standard's requirements. 10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated.
11/17/2016 172887 - HPL-ED2016 V27.0 EN 3 / 4 10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated. 10.7 Internal electrical circuits and connections Is the panel builder's responsibility. 10.8 Connections for external conductors Is the panel builder's responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strength Is the panel builder's responsibility. 10.9.3 Impulse withstand voltage Is the panel builder's responsibility. 10.9.4 Testing of enclosures made of insulating material Is the panel builder's responsibility. 10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. 10.11 Short-circuit rating Is the panel builder's responsibility. 10.12 Electromagnetic compatibility Is the panel builder's responsibility.
10.13 Mechanical function The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed. TechnicaldataETIM6.0 Low-voltage industrial components (EG000017) / DC-power supply (EC002540) Electric engineering, automation, process control engineering / Power supply / Power supply (other) / DC-power supply (ecl@ss8.1-27-04-90-02 [AFZ644012]) Voltage type of supply voltage DC 1st secondary output voltage V 22 - 28 2nd secondary output voltage V 0 - 0 3rd secondary output voltage V 0 - 0 Max. output current 1 A 20 Max. output current 2 A 0 Max. output current 3 A 0 Secondary voltage adjustable No Nominal value output voltage 1 V 24 Nominal value output voltage 2 V 0 Nominal value output voltage 3 V 0 Nominal value output current 1 A 20 Nominal value output current 2 A 0 Nominal value output current 3 A 0 Short-circuit-proof Yes Rated supply voltage at AC 50 Hz V 0 - 0 Rated supply voltage at AC 60 Hz V 0 - 0 Rated supply voltage at DC V 22.8 - 28.8 Output voltage stabilized No Power consumption VA 0 Power output W 480 Stabilized No Type of electric connection Screw connection Rail mounting possible Yes Wall mounting possible No Modular version Yes Width in number of modular spacings 0 Built-in width mm 70 Built-in height mm 121 Direct mounting possible No Width mm 70 Height mm 121 Depth mm 120.1 Suitable for safety functions No SIL according to IEC 61508 None Performance level acc. to EN ISO 13849-1 None Degree of protection (IP) IP20
11/17/2016 Eaton Industries GmbH http://www.eaton.eu © 11/2016 by Eaton Industries GmbH 172887 - HPL-ED2016 V27.0 EN Dimensions Additionalproductinformation(links) IL125001ENInstallationInstructionsforPSG480B24RMBUFFERMODULE IL125001EN Installation Instructions for PSG480B24RM BUFFER MODULE ftp://ftp.moeller.net/DOCUMENTATION/AWA_INSTRUCTIONS/IL125001EN2014_06.pdf