datasheets2002.qxd
Document overview
- Manufacturer or author: Ruth
- PDF pages: 2
Technical content
Features
- Single & dual output versions
- Optional output connectors
- 100% burn in
- Wide input voltage range of 90-264VAC
- Input Surge Current Protection
- Overvoltage Protection
- Overcurrent Protection
- Input conforms with EN1000-3-2 Power Factor Correction Input Voltage: 90-264 VAC Input Frequency: 47-63 Hz Input Current: 3.2A 115VAC, 1.7A 230VAC Earth Leakage Current: 0.5mA typical, 0.75mA max Output Voltage: See table Output Current: See table Output Power: See table Ripple & Noise: 0.5% typical, 1% max pk-pk Line Regulation: 0.5% typical, 1% max Load Regulation: 3% typical, 5% max Over Voltage Protection: 112-132% nominal current Over Current Protection: 110-150% nominal current Efficiency: 75-88% depending on model Temperature Coefficient: All outputs ±0.04%/degree C maximum Transient Response: 4mS 50-100% load change Hold Up Time: 16mS @ 100VAC input & full load Operating Temperature: 0° to +70° C, derate linearly from 100% at 40° C to 50% at 70° C Storage Temperature: -40° to +85° C Relative Humidity: 5 to 95% Safety Approvals: UL, cUL, EN60950, CB & CE EMC: Conform to EN55022’B’, FCC Part 15’B’ and CISPR 22 class ‘B’ Specification The PSE130 series of AC/DC switching power supplies offer up to 130 Watts of continuous output power from a universal AC input. All models meet CISPR class ‘B’ and FCC class ‘B’ emission limits and carry full UL, cUL & TUV(EN60950) safety approvals.
www.powersolve.co.uk Powersolve Electronics Ltd, Units 8, 9 and 12 The Paddock, Hambridge Road, Newbury, Berks RG14 5TQ Tel: 01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk Model Output Voltage Output Current Total Regulation Max Output Power PSE130-35-RM* 3.5VDC 28.57A 7% 100W PSE130-05 5VDC 23A 7% 100W PSE130-09 9VDC 14.44A 5% 130W PSE130-12 12VDC 10.83A 5% 130W PSE130-15 15VDC 8.67A 5% 130W PSE130-18 18VDC 7.22A 5% 130W PSE130-24 24VDC 5.42A 5% 130W PSE130-48 48VDC 2.71A 5% 130W Model Output 1 Output 2 Max Output Power Vnom Imin Imax Total Reg. Vnom Imin Imax Total Reg. PSE130-3312 +3.3V 4A 20A 10% +12V 0.2A 2A 5% 90W PSE130-512 +5V 4A 20A 5% +12V 0.2A 2A 5% 120W PSE130-515 +5V 4A 20A 5% +15V 0.2A 2A 5% 120W PSE130-524 +5V 4A 20A 5% +24V 0.1A 2A 5% 120W PSE130-512H +5V 2A 10A 5% +12V 1A 5A 10% 110W Output Voltage/Current Rating Chart - PSE130 Series Standard models fitted with 1.8 metre output lead fitted with 5 pin 180 ° din connector, except voltage below 9V which are fitted with an 8 pin din connector. *PSE130-35-RM is fitted with remote sense on output connector Options: Alternative output connectors available, consult sales office with your requirements. Any voltage available within the range of 3V to 55V DC. Some options subject to minimum order quantities. Standard output connector 8 pin din connector. Alternative connectors available, consult sales office. 196.0 ±1.0 0.88± 0 .15.120.92 AC INPUT IEC 320 INLET Desk Top Power Supplies