PSD15 PENTAIR | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
With Pentair Pentek Solar Drives, using the sun’s energy to power your day-to-day operations has never been simpler. From dawn to dusk, the Pentair Pentek Solar Drive PSD15 and PSD30 maximize solar energy to power water systems for livestock watering, crop irrigation and remote, off-grid well pumping. Pair it with standard AC Pentair motors for a cost effective solution. Reach more installation opportunities with the unique ability to retrofit to existing pump systems.
FEATURES
Retrofit existing systems with one-of-a-kind 4” AC pump and motor combination Efficient use of solar panels and simple installation Cost savings with Pentair’s traditional 4” AC pumps versus third-party DC pumps Buy only what you need with this configurable system GENERAL APPLICATIONS Crop irrigation Livestock watering Off-grid SOLAR DRIVE PSD15 • PSD30 PENTEK*
*For a detailed list of where Pentair trademarks are registered, please visit www.pentair.com/en/registrations.html. Pentair trademarks and logos are owned by Pentair plc or its affiliates. Third party registered and unregistered trademarks and logos are the property of their respective owners. P12679CS (3/21/19) ©2019 Pentair plc. All Rights Reserved. 293 Wright Street | Delavan, WI 53115 | Ph: 866.973.6835 Orders Fax: 800.426.9446 | www.pentair.com ENVIRONMENTAL IEC 60068-2-2 - Cold IEC 60068-2-14 - Change of temperature Compliance with IEC 60068 IEC 60068-2-2 - Dry Heat IEC 60068-2-30 - Damp Heat TECHNICAL SPECIFICATIONS MPPT operating voltage 100-380V 100-380V Degree of protection NEMA4/IP66 NEMA3/IP65 Max PV panels open circuit voltage 400V 400V Enclosure material Aluminum Aluminum Minimum operating PV voltage 100V 100V Operating temperature - 40°C to 50°C - 40°C to 50°C Maximum PV panel current 9A 15A Dimensions 10"x5.5"x4" 18"x10"x5" Single-phase max AC motor power - 12A Solar terminal A WG#10-14 A WG#10-14 Three-phase max AC motor power 7A 10A Motor terminal A WG#10-14 A WG#10-14 Sensor terminal A WG#14-18 A WG#14-18 Cooling Passive/no fan Passive/no fan SOLAR ARRAY CONFIGURATOR Service Factor Nominal Pump Current Recommended Solar PV Capacity Model 1-ph; 120 Vac (Amps) 1-ph; 230 Vac (Amps) 3-ph; 230 Vac (Amps) Recommended PV Power Capacity (Watts) Minimum Solar MPP Voltage (min/Vmpp) Absolute Maximum Open Circuit Voltage (max Voc.) PSD15 4-6 2-4 2-3 750-1000 80/120 400 PSD15 6-8 4-5 3-4 1000-1500 100/150 400 PSD15 8-10 5-6 4-5 1500-2000 150 400 PSD30 8-10 6-8 6-7 2500-3500 220 400 PSD30 10-12 8-10 7-8 3500-4000 250 400 PSD30 - 10-12 8-10 4500-6000 270 400 Universal controller for ½ - 1½ HP motors – Three Phase, 50/60Hz, 120V/240Vac (PSD15) Universal controller for 1 ½ -3HP motors – Single/Three Phase, 50/60Hz, 120V/240Vac (PSD30) Simple hook up, weather proof, durable and automatic starting capacity Changes a 1 or 2 speed motor/pump into a soft start, VFD (Variable Frequency Drive) VFD will run motors even at low solar output extending the useful operating time Integrated DC Disconnect (PSD30) and PV Parallel Junction HIGHLIGHTS Automatic Dry or Built-In Dry Well Pump Locked Rotor Over-Current and Overload Over-Temperature Short Circuit and Open Circuit Solar Input Reverse Polarity Overvoltage Dry Well Protections PROTECTIONS