PSD03_07 PROTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

STANDARD CAPACITANCE TVS ARRAY 105118.R10 2/07 www.protekdevices.com

APPLICATIONS

✔ Laptop Computers ✔ Cellular Phones ✔ Digital Cameras ✔ Personal Digital Assistant (PDA) IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line)

FEATURES

✔ Unidirectional: 500 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ BidirectionalL 400 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Unidirectional & Bidirectional Configurations ✔ Replacement for MLV (0805) ✔ Protects One Power or I/O Port ✔ ESD Protection > 40 kilovolts ✔ Low Clamping Voltage ✔ Available in Multiple Voltage Types Ranging from 3V to 36V ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOD-323 Package ✔ Weight 5 milligrams (Approximate) ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Device Marking: Marking Code & Polarity Band (Unidirectional Only) 05118 SOD-323 PIN CONFIGURATIONS /MT49 /MT50 UNIDIRECTIONAL /MT49 /MT50 BIDIRECTIONAL

205118.R10 2/07 www.protekdevices.com DEVICE CHARACTERISTICS Note 1: Part numbers with an additional “C” suffix are bidirectional devices, i.e., PSD05C. Note 2: Unidirectional Only: Positive potential is applied from pin 2 to 1 or pin 3 to 4. PART NUMBER (See Notes 1-2) DEVICE MARKING MINIMUM BREAKDOWN VOLTAGE @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @8/20µs VC @ IPP TYPICAL CAPACITANCE 0V @ 1 MHz C pF PSD03 PSD03C PSD05 PSD05C PSD08 PSD08C PSD12 PSD12C PSD15 PSD15C PSD18 PSD18C PSD24 PSD24C PSD36 PSD36C A G B H C J D K E L G N F M R T 4.0 4.0 6.0 6.0 8.5 8.5 13.3 13.3 16.7 16.7 20.0 20.0 26.7 26.7 40.0 40.0 6.5 7.0 9.8 9.8 13.4 13.4 19.0 19.0 24.0 24.0 29.0 29.0 43.0 43.0 60.0 60.0 10.9V @ 43.0A 10.9V @ 39.0A 13.5V @ 42.0A 14.5V @ 28.0A 16.9V @ 34.0A 18.5V @ 17.0A 25.9V @ 21.0A 29.5V @ 14.0A 30.0V @ 17.0A 33.0V @ 12.0A 40.0V @ 9.0A 40.0V @ 9.0A 49.0V @ 12.0A 46.2V @ 9.0A 75.0V @ 5.0A 75.0V @ 5.0A 500 200 350 175 250 150 150 100 MAXIMUM LEAKAGE CURRENT @VWM ID µA 125 125 RATED STAND-OFF VOLTAGE V WM VOLTS 3.3 3.3 5.0 5.0 8.0 8.0 12.0 12.0 15.0 15.0 18.0 18.0 24.0 24.0 36.0 36.0 ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified Operating Temperature SYMBOL V ALUE -55 to 150 °C °C-55 to 150 UNITS TL TSTG PARAMETER Storage Temperature Unidirectional Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Watts MAXIMUM RATINGS @ 25°C Unless Otherwise Specified Bidirectional Peak Pulse Power (tp = 8/20µs) - See Figure 1 P PP 400 Watts

305118.R10 2/07 www.protekdevices.com FIGURE 5 TYPICAL REVERSE VOLTAGE VS CAPACITANCE FOR PSD05 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts C - Capacitance - pF 100 200 300 400 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR PSD03 ESD Test Pulse: 25 kilovolt, 1/30ns (waveform)

5 Volts per Division

TL - Lead Temperature - °C 100 % Of Rated Power Peak Pulse Power 8/20µs Average Power FIGURE 3 POWER DERATING CURVE 0 5 10 15 20 25 30 FIGURE 2 PULSE WAVE FORM FIGURE 1 PEAK PULSE POWER VS PULSE TIME 0.01 1 10 100 1,000 10,000 td - Pulse Duration - µs t - Time - µs 100 120 IPP - Peak Pulse Current - % of I PP TEST WAVEFORM PARAMETERS t f = 8µs td = 20µs tf Peak Value IPP e-t td = t IPP/2 100 1,000 10,000PPP - Peak Pulse Current - Watts 500W, 8/20µs Waveform 400W, 8/20µs Waveform GRAPHS

405118.R10 2/07 www.protekdevices.com SOD-323 PACKAGE OUTLINE & DIMENSIONS COPYRIGHT © ProT ek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the s election or specifications of such products. ProTek Devices

2929 South Fair Lane, Tempe, AZ 85282

Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PSD05C-T7. 3. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PSD05C-LF-T7. A B C D E F H L 1.60 1.15 2.39 0.92 0.25 0.10 0.20 1.90 1.45 2.70 1.10 0.40 0.20 0.10 0.063 0.045 0.094 0.033 0.010 0.004 0.08 0.075 0.057 0.106 0.043 0.016 0.008 0.004 DIM MIN MAX MIN MAX MILLIMETERS INCHES PACKAGE DIMENSIONS NOTES 1. Controlling Dimensions in Millimeters. 2. Dimensions are exclusive of mold flash and metal burrs. PACKAGE OUTLINE SOD-323 PACKAGE MOUNTING PAD /MT48/MT46/MT49/MT49/MT56/MT148 /MT40/MT51/MT46/MT48/MT48/MT109/MT109/MT41 /MT48/MT46/MT48/MT51/MT49/MT148 /MT40/MT48/MT46/MT56/MT48/MT109/MT109/MT41 /MT48/MT46/MT48/MT51/MT49/MT148 /MT40/MT48/MT46/MT56/MT48/MT109/MT109/MT41 /MT67 /MT65 /MT69 /MT66 /MT70 /MT68 /MT72/MT76 /MT84/MT111/MT112/MT32/MT99/MT111/MT118/MT101/MT114/MT32/MT116/MT97/MT112/MT101 /MT75/MT48 /MT116 /MT68 /MT80/MT48 /MT80/MT50 /MT49/MT48/MT32/MT80/MT105/MT116/MT99/MT104/MT101/MT115/MT32/MT67/MT117/MT109/MT117/MT108/MT97/MT116/MT105/MT118/MT101 /MT84/MT111/MT108/MT101/MT114/MT97/MT110/MT99/MT101/MT32/MT111/MT110/MT32/MT84/MT97/MT112/MT101/MT46/MT32/MT177/MT32/MT48/MT46/MT50 /MT65/MT48 /MT66/MT48 /MT80 /MT69 /MT70 /MT87 /MT85/MT115/MT101/MT114/MT32/MT68/MT105/MT114/MT101/MT99/MT116/MT105/MT111/MT110/MT32/MT111/MT102/MT32/MT70/MT101/MT101/MT100 /MT80/MT105/MT110/MT32/MT49 /MT73/MT110/MT100/MT105/MT99/MT97/MT116/MT101/MT100 /MT98/MT121/MT32/MT66/MT97/MT110/MT100 Note: Cathode Band for Unidirectional Parts Only Tape & Reel Specifications (Dimensions in millimeters) DE P0 tmaxFP 2 W P 4.00 ±0.10 0.25 A0 B0 K0Reel Dia. Tape Width Outline & Dimensions: Rev 2 - 9/05, 06010