LEDWO75N BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Diffused on-axis illumination provides uniform lighting for specular surfaces
  • 75 mm x 75 mm light aperture
  • The suggested field of view is 38 mm x 38 mm and the suggested standoff is 25 mm
  • Choose white, blue, or red LED models
  • Black anodized aluminum housing Models Illumination Type Color Cable Supply Voltage Supply Current Connections LEDWO75N† Continuous diffused light White 6500 K 0.5 m (18") terminated with 9-pin D-sub connector (male pins) 12V dc ±10% with voltage regulation of ±1% 1.05 A max. 12V dc models: Pin 1 = +V fan Pin 2 = dc common fan Pin 3 = dc common Pin 4 = +V Power supply model PSA-12(E) or PS2V-12(E) is recommended (see other side) LEDBO75N† Blue 470 nm LEDRO75N† Visible Red 640 nm LEDRO75N-H† Continuous diffused light, high output Red 660 nm 1.0 mA max. LEDWO75N-S† Strobed diffused light White 6500 K 1.8 m (6') terminated with 9-pin D-sub connector (male pins) 24V dc ±10% with voltage regulation of ±1% 9.6 A max. Pin 4 = +V Pin 1 = dc common Use strobe control module model SCM (see other side) LEDRO75N-S† Red 640 nm 6.0 A max. Useful Life White and blue models: 50,000 hours; Red models: 60,000 hours. Note: actual useful life of strobed lights depends on duty cycle Environmental Rating IEC IP20; NEMA 1 Operating Conditions Temperature: 0° to +40°C (+32° to 104°F) Maximum relative humidity: 95% at 40°C (non-condensing)

LED Diffused On-Axis Lights (75 mm) P/N 67439 rev. A Strobe Control Module (see data sheet p/n 67448) Models Input Trigger Input Output Output Pulse Range Used with SCM† 24V dc ±5% 2 A max. 5 - 12V dc pulse rising or falling (switch selectable) 10 mA max. 2-channels 24V dc ±5%

9 A nominal per

channel @ 60 Hz 5 to 1,300 microseconds Strobed types: LEDWO75N-S LEDRO75N-S(Use Power Supply PSC-24 or PSC-24E) Variable Power Supplies (see data sheet p/n 67449) Models Input Input Cord Output Output Cable Used with PS2V-12† 100-140V ac 60 Hz North America (NEMA 5-15) 2-channels 6 - 12V dc 2 A max. per channel 1.8 m (6') Terminated with 9-pin D-sub connector (female pins) Continuous types: LEDWO75N LEDBO75N LEDRO75N LEDRO75N-HPS2V-12E† 200-250V ac 50 Hz Cont. Europe (Schuko CEE 7) Continuous Power Supplies Models Input Input Cord Output Output Cable Used with PSA-12 100-250V ac 50/60 Hz North America (NEMA 5-15) 12V dc ±5% with voltage regulation of ±1% 3.5 A max. 1.8 m (6') Terminated with 9-pin D- sub connector (female pins) Continuous types: LEDWO75N LEDBO75N LEDRO75N LEDRO75N-H PSA-12E Cont. Europe (Schuko CEE 7) PSC-24† 100-250V ac 50/60 Hz North America (NEMA 5-15) 24V dc ±5% with voltage regulation of ±1% 2.2 A max. 1.8 m (6') 2-wire Unterminated SCM Strobe Control Module (see below)PSC-24E† Cont. Europe (Schuko CEE 7) Accessories † These models are not stocked and are non-returnable. Extension Cables Models Length Configuration Used with DB906† 1.8 m (6') Terminated both ends with 9-pin D-sub connector, for continuous lights (one end male pins and opposite end female pins) Continuous types: LEDWO75N LEDBO75N LEDRO75N LEDRO75N-H DB9Y† 1.8 m (6') Y cable for powering 2 lights from one supply, for continuous lights DB906S† 1.8 m (6') Terminated both ends with 9-pin D-sub connector, for strobed lights (one end male pins and opposite end female pins) Strobed types: LEDWO75N-S LEDRO75N-S DB9YS† 1.8 m (6') Y cable for powering 2 lights from one supply, for strobed lights WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.