PSAS4F313002XXX AMPHENOLCS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Amphenol Information Communications and Commercial Products www.amphenol-icc.com HIGH SPEED MULTI-PROTOCOL DESIGN WITH FLEXIBILITIES SAS/PCIe ® 4.0 (U.2&U.3) connectors come with 16GT/s (PCIe ® lanes) or 24Gb/s (SAS lanes) speeds to meet the demands of next-generation servers. The 68-position, SAS/PCIe ® receptacle and header enables implementation of high speed Serial Attached SCSI (SAS) hard disk drive (HDD) interface as well as Peripheral Component Express (PCIe ®)-based devices. The molded guide post allows device plug and receptacle to self- align during mating process. With halogen-free high temperature thermoplastic, these connectors are made to withstand diverse conditions. It also offers a durability of 500 mating cycles. TARGET MARKETS SAS/PCIe® 4.0 (U.2&U.3) Connectors § Compatible with SFF8639 specification § Capable of meeting 24Gb/s SSDs and HDDs or PCle® based devices at 16GT/s § Footprint backward compatible to 12G, 6G and 3G SAS connectors FEATURES BENEFITS §Receptacles are inter-mateable with unshielded dual port SFF8680 (SAS 3.0 or SAS 4.0) connectors §Offers flexibility in component selection §SAS/PCIe® connectors enable SFF8630, SFF8680 and SFF8432 interfaces §Implementation of high speed SSDs (Solid State Drives) and HDDs (Hard Disk Drives) allows compatibility between unshielded dual and multiport interfaces §Backward compatible with 12Gb/s, 6Gb/s SAS, SATA and 3Gb/s SFF8482 connectors §Same interface can be used for cost-effective storage HDDs as well as higher performance server SSDs §Supports up to 4 port 16GT/s PCIe® based devices §Improves performance and faster file transfers §Supports both SAS and SATA drives §Addresses the needs of both mission critical and bulk storage applications §Staggered contact lengths §Provides sequential contact mating for hot plugging §Stamped clips act as connector retainers for robust PCB attachment §Provide additional mechanical strength after soldering §Molded guideposts help mating halves to self-align by providing angled lead-ins §Compensates for connector misalignment

www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice. MATERIAL § Contact Base Metal: Copper alloy § Contact Area Plating: Gold over nickel § Solder Tail Plating: Tin over nickel § Retainer Clip Base Metal: Copper alloy § Retainer Plating: Tin over nickel § Housing: Halogen-free high temperature thermoplastic (UL94V-0), black ELECTRICAL PERFORMANCE § Contact Resistance: 30mΩ max. for signal contacts. Per EIA 364-23 § Current Rating: 1.5A min. per contact with temperature rise not exceeding 30°C (power pins only: P1–P15). Per EIA 364-70B § Insulation Resistance: 1000MΩ min. per EIA 364-21 MECHANICAL PERFORMANCE § Durability: 500 mating cycles § Mating Force: 59N max. § Unmating Force: 6N min. ENVIRONMENTAL § Humidity: 96 hours at 40°C with 90-95% relative humidity. Per EIA 364-31, Method II, test condition A § Temperature Life: 85°C for 500 hours. Per EIA 364-17 test condition III, method A § Thermal Shock: 10 cycles between -55°C to +85°C. Per EIA 364-32, test condition I § Mixed Flow Gas: Expose ½ samples unmated for 7 days and then mated for 7 additional days; the other ½ samples are exposed mated for 14 days. Per EIA 364-65, class II Aexposed mated for 14 days. Per EIA 364-65, class II A SPECIFICATIONS § Amphenol Product Specification: SSAS009 PACKAGING § Tape and Reel § Tray TARGET MARKETS/APPLICATIONS Processor and Storage Blade Mezzanine Card HDD HDD Carrier External Storage System Interposer Card Server Storage Server Processor and Storage Blade TECHNICAL INFORMATION SAS/PCIe® 4.0 (U.2&U.3) Connectors

www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice. SAS/PCIe® 4.0 (U.2&U.3) Connectors PART NUMBERS Note: More options are available upon request. Please contact your local sales representative. SAS/PCIe 4.0 Receptacle Application Orientation Termination Type Retainers Height (mm) Mount Type Impedance Others Part Numbers U.2 Vertical SMT DIP 8.15 Top mount 92Ω Wide base PSAS4F313002XXX U.2 Vertical SMT DIP 8.15 Top mount 92Ω High dura- bility PSASF313027XXX U.2 Right Angle SMT DIP 2.85 Top mount 92Ω Standard PSAS4F213002XXX U.2 Right Angle SMT DIP 2.85 Top mount 92Ω Reverse PSAS4F213001XXX U.2 Vertical SMT SMT 8.15 Top mount 92Ω - PSAS4F313004XXX U.2 Vertical SMT DIP 8.15 Top mount 92Ω - PSAS4F313012XXX U.2 Right Angle Hybrid DIP 1.75 Top mount 92Ω - PSAS4F413001XXX U.2 Vertical SMT Fork-lock 8.15 Top mount 92Ω - PSAS4F313009XXX U.2&U.3 Vertical SMT SMT 8.15 Top mount 92Ω - PSAS4F313001XXX U.2&U.3 Vertical SMT SMT 8.15 Top mount 92Ω - PSAS4F313007XXX U.2&U.3 Vertical SMT DIP 8.15 Top mount 92Ω - PSAS4F313008XXX U.2 Vertical SMT DIP 8.15mm Top Mount 92Ω Wide base PSAS4F313011xxx U.2&U.3 Vertical SMT Fork lock 8.15mm Top Mount 85Ω - PSAS4F313018xxx U.2&U.3 Vertical SMT SMT 8.15mm Top Mount 85Ω - PSAS4F313028xxx U.2 R/A SMT DIP 2.85mm Sink type 92Ω - PSAS4F213004xxx

www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice. SAS/PCIe® 4.0 (U.2&U.3) Connectors PART NUMBERS Note: More options are available upon request. Please contact your local sales representative. SAS/PCIe 4.0 Header Application Orientation Termination Type Retainers Height (mm) Mount Type Impedance Others Part Numbers U.2 Vertical SMT SMT 8.35 Top mount 92Ω - PSAS4M313006XXX U.2 Right Angle SMT SMT 2.55 Sink type 92Ω - PSAS4M213008XXX U.2 Right Angle SMT SMT 4.00 Sink type 92Ω - PSAS4M213002XXX U.2&U.3 Right Angle SMT SMT 2.55 Sink type 92Ω - PSAS4M213001XXX U.2&U.3 Right Angle SMT SMT - Straddle Mount 92Ω With SIO pins PSAS4M213012XXX U.2 R/A SMT SMT 5.3mm Top mount 85ohm - PSAS4M213018xxx U.2 R/A SMT SMT 2.75mm Top mount 85ohm - PSAS4M213017xxx SSIOSASPCIE401219EA4