PSA-14 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Flat Gain, Ultra-Wideband Monolithic Amplifier Page 1 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Ultra broadband performance
  • Broadband without external matching components
  • May be used as a replacement to ADA-4743a,b
  • Suitable for low phase noise applications Product Overview PSA-14+ (RoHS compliant) is an advanced ultra-wideband amplifier fabricated using GaAs HBT technol - ogy and offers excellent gain flatness over a broad frequency range. In addition, the PSA-14+ has good input and output return loss over this frequency range without the need for external matching components. Lead finish is matte-tin. It has repeatable performance from lot to lot. Feature Advantages Ultra Broad Band: 0.01 to 10 GHz Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX in a single amplifier. No External Matching Components Required PSA-14+ provides good Input and Output Return Loss of 16-41dB over 0.05 - 8 GHz without the need for any external matching components Excellent ESD HBM: class 1C (1000 to <2000V) MM: class M2 (100 to <200V) Simplifies ESD handling. Low additive phase noise, typically -164 dBc/Hz @10 KHz offset Ideal for low phase noise synthesizer applications PSA-14+ Key Features 50Ω 0.01 to 10 GHz SOT -343 PACKAGE Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The ADA-4743 part number is used for identification and comparison purposes only.

Flat Gain, Ultra-Wideband Monolithic Amplifier Page 2 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits simplified schematic and pin description Function Pin Number Description RF IN 3 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 1 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Application Circuit”, Fig. 2 GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. 0.01-10 GHz Product Features

  • Gain, 16.5 dB typ. at 2 GHz
  • Excellent return loss, 19 dB typ. input, 35 dB typ. output REV. A ECO-005768 PSA-14+ CM/RS/CP 210218 General Description PSA-14+ (RoHS compliant) is an advanced ultra-wideband amplifier fabricated using GaAs HBT technol - ogy and offers excellent gain flatness over a broad frequency range. In addition, the PSA-14+ has good input and output return loss over this frequency range without the need for external matching components. Lead finish is matte-tin. It has repeatable performance from lot to lot. Typical Applications
  • Base station infrastructure
  • Test instruments
  • MMDS & Wireless LAN
  • LTE
  • Satellite communication
  • Avionics RF-IN RF-OUT and DC-IN GND CASE STYLE: MMM1362 PSA-14+ +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications 2 3

4 GROUND

RF-OUT & DC-IN Generic photo used for illustration purposes only

Monolithic InGap HBT MMIC Amplifier Page 3 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits PSA-14+ Absolute Maximum Ratings3 Parameter Ratings Operating Temperature (ground lead) -40°C to 85°C Storage Temperature -65°C to 150°C Operating Current at 5V (Vcc) & 16.5Ω resistor 100 mA Power Dissipation 0.34 W Input Power (CW) 28 dBm (5 min max.) 11 dBm (continuous) DC Voltage on Pin 1 6 V (3) Permanent damage may occur if any of these limits are exceeded. Electrical maximum ratings are not intended for continuous normal operation. 1. Measured on Mini-Circuits Characterization test board TB-PSA-14+. See Characterization Test Circuit (Fig. 1) 2. (Current at 85°C — Current at -45°C)/130 Electrical Specifications at 25°C and Vcc=5V, R= 16.5Ω unless noted Parameter Condition (GHz) Min. Typ. Max. Units Frequency Range 0.01 10.0 GHz Gain 0.05 - 16.2 - dB 0.85 - 17.1 - 2.0 14.8 16.5 18.1 6.0 - 14.1 - 8.0 - 13.7 - 10.0 - 12.8 - Gain Flatness 0.05-6.0 ±1.7 dB Input Return Loss 0.05 - 13.3 - dB 0.85 - 23.1 - 2.0 14 19.1 - 6.0 - 21.3 - 8.0 - 18.0 - 10.0 - 7.5 - Output Return Loss 0.05 14.1 dB 0.85 30.0 2.0 34.9 6.0 18.4 8.0 18.9 10.0 8.7 Reverse Isolation 6.0 21.8 dB Output Power at 1dB Compression 0.05 16.7 dBm 0.85 16.5 2.0 16.3 6.0 13.3 8.0 9.9 10.0 7.2 Output IP3 0.2 29.6 dBm 0.85 30.5 2.0 29.4 6.0 24.0 8.0 20.2 10.0 17.2 Noise Figure 0.2 3.9 dB 0.85 3.9 2.0 3.9 6.0 4.3 8.0 4.7 10.0 5.2 Additive Phase Noise, 2.0 GHz, 10KHz offset -164 dBc/Hz Supply Operating Voltage (Vcc) 4.8 5.0 5.2 V Device Operating Current 47 57 mA Device Current Variation vs. Temperature2 42 µA/°C Device Current Variation vs. Voltage 0.018 mA/mW Thermal Resistance, junction-to-ground lead 156 °C/W

Monolithic InGap HBT MMIC Amplifier Page 4 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits PSA-14+ Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-PSA-14+) Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. (R=16.5Ω) Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/tone at output. Characterization Test Circuit Recommended Application Circuit Fig 2. Test Board includes case, connectors, and components soldered to PCB (Cblock=0.001 µF, Cbypass=0.1 µF, R=16.5Ω) Product Marking TB-PSA-14+ Marking may contain other features or characters for internal lot control

Monolithic InGap HBT MMIC Amplifier Page 5 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits PSA-14+ MSL Test Flow Chart ESD Rating Human Body Model (HBM): Class 1C (1000 to <2000V) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M2 (100 to <200V) in accordance with ANSI/ESD STM5.2-1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style MMM1362 (SOT 343) Plastic package, exposed paddle Lead finish: Matte-Tin Tape & Reel F90 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500,1K,2K or 3K devices Suggested Layout for PCB Design PL-684 Evaluation Board TB-PSA-14+ Environmental Ratings ENV08T1 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start Finish Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp