PS9924_V01 RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 17
Technical content
R08DS0059EJ0300 Rev.3.00 Page 1 of 16 Jun. 30, 2021 Preliminary Data Sheet PS9924 HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE, 8-PIN LSDIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 15 mm
DESCRIPTION
The PS9924 is an optical coupled high-speed, active low type isolator containing an AlGaAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip.
FEATURES
Long creepage distance (15 mm MIN.) High common mode transient immunity (CMH, CML = 15 kV/s MIN.) High-speed response (tPHL = 100 ns MAX., tPLH = 100 ns MAX.) Low power consumption (VCC = 3.3/5V) 8-pin LSDIP (Long Creepage SDIP) type Embossed tape product: PS9924-F3: 1 000 pcs/reel Pb-Free and Halogen Free product Safety standards UL approved: UL1577, Double protection CSA approved: CAN/CSA-C22.2 No.62368-1, Reinforced insulation SEMKO approved (Creepage Distance:14.5 mm *): EN 62368-1, IEC 62368-1, Reinforced insulation * Creepage Distance:15 mm – in process VDE approved: DIN EN 60747-5-5 (Option)
APPLICATIONS
Industrial inverter Solar inverter R08DS0059EJ0300 Rev.3.00 Jun. 30, 2021 Start of mass production Jun.2012
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 2 of 16 Jun. 30, 2021 PACKAGE DIMENSIONS (UNIT: mm) Weight：0.642g (typ.) PHOTOCOUPLER CONSTRUCTION Parameter MIN. Air Distance 14.5 mm Creepage Distance 15 mm Isolation Distance 0.4 mm 16.7±0.4 0.8±0.25 0.2±0.15 0.25±0.15 3.5±0.23.7±0.25 1.270.5±0.10.25M 6.7±0.3 13.8±0.3
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 3 of 16 Jun. 30, 2021 BLOCK DIAGRAM MARKING EXAMPLE LE DOutputON LOFFHS HIE LD23 8659924RN2312N31No. 1 pinMarkY ear Assembled(Last 1 Digit)R ank CodeWeek AssembledAssembly LotType NumberCompany Initial
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 4 of 16 Jun. 30, 2021
ORDERING INFORMATION
Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number*1 PS9924 PS9924-Y-AX Pb-Free and Halogen Free (Ni/Pd/Au) 10 pcs (Tape 10 pcs cut) Standard products (UL, CSA, SEMKO approved) PS9924 PS9924-F3 PS9924-Y-F3-AX Embossed Tape 1 000 pcs/reel PS9924-V PS9924-Y-V-AX 10 pcs (Tape 10 pcs cut) UL, CSA, SEMKO, DIN EN 60747-5-5 approved PS9924-V-F3 PS9924-Y-V-F3-AX Embossed Tape 1 000 pcs/reel Note: *1. For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current I F 25 mA Reverse Voltage V R 5 V Power Dissipation*1 P D 45 mW Detector Supply Voltage V CC 7 V Output Voltage V O 7 V Output Current I O 25 mA Power Dissipation *2 P C 250 mW Isolation Voltage *3 BV 7 500 Vr.m.s. Operating Ambient Temperature TA 40 to +110 C Storage Temperature T stg 55 to +125 C Notes: *1. Reduced to 0.8 mW/C at TA = 85C or more. *2. Reduced to 5.2 mW/C at TA = 85C or more. *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. TYP. MAX. Unit Low Level Forward Voltage V F(OFF) 2 0.8 V High Level Forward Current I F(ON) 8 10 12 mA Supply Voltage V CC 2.7 5.5 V Pull-up Resistor R L 330 4k
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 5 of 16 Jun. 30, 2021 ELECTRICAL CHARACTERISTICS (TA = 40 to +110 C, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. *1 MAX. Unit Diode Forward Voltage V F I F = 10 mA, TA = 25 C 1.3 1.56 1.8 V Reverse Current I R V R = 3 V, TA = 25 C 10 A Terminal Capacitance C t f = 1 MHz, V F = 0 V, TA = 25 C 30 pF Detector High Level Output Current IOH V CC = VO = 3.3 V, VF = 0.8 V 1 80 A V CC = VO = 5.5 V, VF = 0.8 V 1 100 Low Level Output Voltage VOL V CC = 3.3 V, IF = 10 mA, IOL = 13 mA 0.2 0.6 V V CC = 5.5 V, IF = 10 mA, IOL = 13 mA High Level Supply Current ICCH V CC = 3.3 V, IF = 0 mA, VO = open 2 7 mA V CC = 5.5 V, IF = 0 mA, VO = open 3 7 Low Level Supply Current ICCL V CC = 3.3 V, IF = 10 mA, VO = open 4 10 mA V CC = 5.5 V, IF = 10 mA, VO = open 5 10 Coupled Threshold Input Voltage (H L) IFHL V CC = 3.3 V, RL = 350 , VO = 0.8 V 2 5 mA VCC = 5.0 V, RL = 350 , VO = 0.8 V Isolation Resistance R I-O V I-O = 1 kVDC, RH = 40 to 60 % 1011 Isolation Capacitance C I-O V I-O = 0 V, f = 1 MHz, TA = 25 C 1.0 pF Propagation Delay Time (H L) *2 tPHL V CC = 3.3 V, IF = 10 mA, RL = 350 , CL = 15 pF TA = 25 C 45 75 ns TA = 40 C to 110 C 100 VCC = 5 V, IF = 10 mA, RL = 350 , CL = 15 pF TA = 25 C 45 75 TA = 40 C to 110 C 100 Propagation Delay Time (L H) *2 tPLH V CC = 3.3 V, IF = 10 mA, RL = 350 , CL = 15 pF TA = 25C 40 75 ns TA = 40 C to 110 C 100 VCC = 5 V, IF = 10 mA, RL = 350 , CL = 15 pF TA = 25 C 40 75 TA = 40 C to 110 C 100 Pulse Width Distortion (PWD)*2 tPHL-tPLH VCC = 3.3/5 V, IF = 10 mA, RL = 350 , CL = 15 pF 5 35 ns Propagation Delay Skew*2 tpsk 40 Rise Time*2 t r 20 Fall Time*2 t f 5 Common Mode Transient Immunity at High Level Output*3 CMH V CC = 3.3/5 V, IF = 0 mA, VO > 2 V, RL = 350 , VCM = 1 kV, TA = 25 C 15 20 kV/ s Common Mode Transient Immunity at Low Level Output*3 CML V CC = 3.3/5 V, IF = 10 mA, VCM = 1 kV, TA = 25 C 15 20 kV/ s
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 6 of 16 Jun. 30, 2021 Notes: *1. Typical values at TA = 25 C *2. Test circuit for propagation delay time *3. Test circuit for common mode transient immunity S HIE LD Rem ark CL includes probe and stray wiring capacitance.Pulse input (IF)47 Ω(PW = 1 s, Duty cycle = 1/10)µ µRL = 350 ΩVO (Monitor)Input(Monitor)0.1 FCL = 15 pFVCC = 3.3 VVCC = 5 V12348765 Input OutputtPHLtPLH IF (ON)50%
1.5 VVOL
IFVOUT90 %10 % tf tr90 %10 % R emark CL includes probe and stray wiring capacitance.90 %10 %1 kVVOH0 V2 V0.8 VVOLVCMtrtfVOIF (OFF)VOIF (ON)S HIE LD12348765RL = 350 ΩCL = 15 pFVO (Monitor)0.1 Fµ VCM= 1 kVS W IFVCC = 3.3 VVCC = 5 V+
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 7 of 16 Jun. 30, 2021 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) Remark The graphs indicate nominal characteristics. Ambient T emperature TA (°C )Diode P ower Dissipation PD (mW) DIODE P OWE R DIS S IP ATION vs. AMBIE NT TE MPE R ATUR EAmbient T emperature TA (°C )Detector P ower Dissipation PC (mW)25 50 75 12510005045403530252015105 25 50 75 100 125110030025020015010050 RL = 350 ΩRL = 1.0 kΩRL = 4.0 kΩRL = 350 ΩRL = 1.0 kΩRL = 4.0 kΩ
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 8 of 16 Jun. 30, 2021 Remark The graphs indicate nominal characteristics. PropagationDelayTime tPHL, tPLH (ns)P ulseWidth Distortion (P WD) | tPHL – tPLH | (ns)P R OP AGATION DE LAY TIME ,P ULS E WIDTH DIS TOR TIONvs. AMBIE NT TE MP E R ATUR E1007550250VCC = 3.3 V,IF = 10 mA,RL = 350 ΩPWDtPLHtPHLAmbient T emperature TA (°C) -25 0 25 50 10075-50 125 IOL = 16 mAIOL = 13 mAIOL = 6 mAIOL = 10 mAVCC= 3.3 V,IF= 10 mAIOL = 16 mAIOL = 13 mAIOL = 6 mAIOL = 10 mAVCC= 5.5 V,IF= 10 mA VCC = 5.0 VVCC = 3.3 VTHR E S HOLD INP UT C UR R E NT vs.AMBIE NT TE MP E R ATUR E
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 9 of 16 Jun. 30, 2021 Remark The graphs indicate nominal characteristics. P R OP AGATION DE LAY TIMEvs. FOR WAR D C UR R E NTF orward C urrent IF (mA)P ropagation Delay Time tPHL, tPLH (ns)5 10 20 251007550250VCC = 5.0 V,RL = 350 ΩtPHLtPLH15F orward C urrent IF (mA)PropagationDelayTime tPHL, tPLH (ns)5 10 20 251007550250VCC = 3.3 V,RL = 350 ΩtP HLtPLH15P R OP AGATION DE LAY TIMEvs. FOR WAR D C UR R E NT
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 10 of 16 Jun. 30, 2021 TAPING SPECIFICATIONS (UNIT: mm) Taping DirectionOutline and Dimensions (Tape)Outline and Dimensions (Reel)Packing: 1 000 pcs/reel Direction of feedUnit: mmUnit: mm
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 11 of 16 Jun. 30, 2021 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) Remark All dimensions in this figure must be evaluated before use. 20.91.2716.6 【8pin LSDIP】
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 12 of 16 Jun. 30, 2021 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering
- Peak reflow temperature 260 C or below (package surface temperature)
- Time of peak reflow temperature 10 seconds or less
- Time of temperature higher than 220 C 60 seconds or less
- Time to preheat temperature from 120 to 180 C 120 30 s
- Number of reflows Three
- Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (2) Wave soldering
- Temperature 260 C or below (molten solder temperature)
- Time 10 seconds or less
- Preheating conditions 120 C or below (package surface temperature)
- Number of times One (Allowed to be dipped in solder including plastic mold portion.)
- Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron
- Peak Temperature (lead part temperature) 350 C or below
- Time (each pins) 3 seconds or less
- Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 110 C (4) Cautions
- Flux Cleaning Avoid cleaning with Freon based or halogen-based (chlorinated etc.) solvents.
- Do not use fixing agents or coatings containing halogen-based substances. 220°C P ackage S urface Temperature T (°C )Time (s)(heating)to 10 sto 60 s260°C MAX.R ecommended Temperature P rofile of Infrared R eflow120±30 s(preheating)180°C120°C
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 13 of 16 Jun. 30, 2021 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of more than 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Pin 1, 4 (which is an NC*1 pin) can either be connected directly to the GND pin on the LED side or left open. Also, Pin 7 (which is an NC*1 pin) can either be connected directly to the GND pin on the detector side or left open. Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this may degrade the internal noise environment of the device. Note: *1. NC: Non-Connection (No Connection). 4. Avoid storage at a high temperature and high humidity.
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 14 of 16 Jun. 30, 2021 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Rating Unit Climatic test class (IEC 60068-1/DIN EN 60068-1) 40/110/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.6 UIORM., Pd 5 pC UIORM Upr 1 600 2 560 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 UIORM., Pd 5 pC Upr 3 000 V peak Highest permissible overvoltage UIOTM 12 000 V peak Degree of pollution (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1)) 2 Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303-11)) CTI 175 Material group (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1)) III a Storage temperature range T stg –55 to +125 °C Operating temperature range T A –40 to +110 °C Isolation resistance, minimum value VIO = 500 V dc at TA = 25 °C VIO = 500 V dc at TA MAX. at least 100 °C Ris MIN. Ris MIN. 1012 1011 Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Tsi Isi Psi Ris MIN. 175 400 700 109 mA mW Dependence of maximum safety ratings with package temperature 010020030040050060070080090010000 25 50 75 100 125 150 175 200Package temp Tsi (°C)Total Power Dissipation Psi (mW)Input Current Isi (mA)Psi: Total Power DissipationIsi: Input Current
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 15 of 16 Jun. 30, 2021 Method a Destructive Test, Type and Sample Test Method b Non-destructive Test, 100% Production Test t1tinit2t3tmt4UIOTM=12000VUpr =2560VUIORM =1600VV tt1,t2= 1 to 10 sect3,t4= 1 sectm(PARTIAL DISCHARGE)= 10 secttest = 12 sectini = 60 secttestUpr =3000VUIORM =1600Vt3t4Vt3,t4= 0.1 sectm(PARTIAL DISCHARGE)= 1.0 secttest = 1.2 secttestttm
PS9924 Data Sheet Chapter Title R08DS0059EJ0300 Rev.3.00 Page 16 of 16 Jun. 30, 2021 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.
- Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.
- Do not burn, destroy, cut, crush, or chemically dissolve the product.
- Do not lick the product or in any way allow it to enter the mouth. All trademarks and registered trademarks are the property of their respective owners.
© 2020 Renesas Electronics Corporation. All rights reserved. Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operati on of semiconductor products and application examples. You are fully responsible for the incorporation or any other use of the circ uits, software, and information in the design of your product or system. Renesas Electronics disclaims any and all liability for any losses and damages incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics hereby expressly disclaims any warranties against and liability for infringement or any other claims involv ing patents, copyrights, or other intellectual property rights of third parties, by or arising from the use of Renesas Electronics products or technical information described in this document, including but not limited to, the product data, drawings, charts, programs, algorithms, and application examples. 3. No license, express, implied or otherwise, is granted hereby under any patent s, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You shall be responsible for determining what licenses are required from any third parties, and obtaining such licenses for t he lawful import, export, manufacture, sales, utilization, distribution or other disposal of any products incorporating Renesas Electronics products, if required. 5. You shall not alter, modify, copy, or reverse engineer any Renesas Electronics product, whether in whole or in part. Renesas Electronics disclaims any and all liability for any losses or damages incurred by you or third parties arising from such alteration, modification, copy ing or reverse engineering. 6. Renesas Electronics products are classified according to the following two qualit y grades: “Standard” and “High Quality”. The intended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; industrial robots; etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control (traffic lights); large -scale communication equipment; key financial terminal systems; safety control equipment; etc. Unless expressly designated as a high reliability product or a product for harsh environments in a Renesas Electronics data s heet or other Renesas Electronics document, Renesas Electronics products are not intended or authorized for use in products or systems that may pose a direct threat t o human life or bodily injury (artificial life support devices or systems; surgical implantations; etc.), or may cause serious property damage (space system; undersea repeaters; nuclear power control systems; aircraft control systems; key plant systems; military equipment; etc.). Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document. 7. No semiconductor product is absolutely secure. Notwithstanding any securi ty measures or features that may be implemented in Renesas Electronics hardware or software products, Renesas Electronics shall have absolutely no liability arising out of any vulnerability or sec urity breach, including but not limited to any unauthorized access to or use of a Renesas Electronics product or a system that uses a Renesas Electronics product. RENESAS ELECTRONICS DOES NOT WARRANT OR GUARANTEE THAT RENESAS ELECTRONICS PRODUCTS, OR ANY SYSTEMS CREATED USING RENESAS ELECTRONICS PRODUCTS WILL BE INVULNERABLE OR FREE FROM CORRUPTION, ATTACK, VIRUSES, INTERFERENCE, HACKING, DATA LOSS OR THEFT, OR OTHER SECURITY INTRUSION (“Vulnerability Issues”). RENESAS ELECTRONICS DISCLAIMS ANY AND ALL RESPONSIBILITY OR LIABILITY ARISING FROM OR RELATED TO ANY VULNERABILITY ISSUES. FURTHERMORE, TO THE EXTENT PERMITTED BY APPLICABLE LAW, RENESAS ELECTRONICS DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THIS DOCUMENT AND ANY RELATED OR ACCOMPANYING SOFTWARE OR HARDWARE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. 8. When using Renesas Electronics products, refer to the latest product information (data sheets, user’s manuals, application notes, “General Notes for Handling and Using Semiconductor Devices” in the reliability handbook, etc.), and ensure that usage conditions are within the ranges specified by Renesas Electronics with respect to maximum ratings, operating power supply voltage range, heat dissipation characteristics, installation, etc. Renesas Electronics disclaims any and all liability for any malfunctions, failure or accident arising out of the use of Renesas Electronics products outside of such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of Renesas Electronics products, semiconductor products have specific characteristics, such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Unless de signated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not subject to radiation resistance design. You are responsible for implementing safety measures to guard agains t the possibility of bodily injury, injury or damage caused by fire, and/or danger to the public in the event of a failure or malfunction of Renesas Electronics products, such as safety design for hardware and software, including but not limited to redundancy, fire control and malfunction prevention, ap propriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult and impractical, you are responsible for evaluating the safety of the final products or systems manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. You are responsible for carefully and sufficiently investigating applicable laws and regulations that re gulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive, and using Renesas Electronics products in compliance with all these applicable laws and regulations. Renesas Electronics disclaims any and all liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. Renesas Electronics products and technologies shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You shall comply with any applicable export control laws and regulations promulgated and administered by the governments of any countries asserting jurisdiction over the parties or transac tions. 12. It is the responsibility of the buyer or distributor of Renesas Electronics products, or any other party who distributes, dis poses of, or otherwise sells or transfers the product to a third party, to notify such third party in advance of the contents and conditions set forth in this document. 13. This document shall not be reprinted, reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 14. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products. (Note1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its directly or indirectly controlled subsidiaries. (Note2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. (Rev.5.0-1 October 2020) Corporate Headquarters Contact information TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan www.renesas.com For further information on a product, technology, the most up- to-date version of a document, or your nearest sales office, please visit: www.renesas.com/contact/. Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners.