PS9714-V

PS9714 NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

FEATURES

NEC's HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE

5 PIN SOP OPTOCOUPLER

DESCRIPTION

NEC's PS9714 is an optically coupled, high speed isolator containing a GaAIAs LED on the light emitting diode (input) side and a photodiode and a signal procesing circuit on the detector (output) side on one chip. The PS9714 is in a plastic SOP (Small Outline Package) for high density applications.

• HIGH COMMON MODE TRANSIENT IMMUNITY: C MH, CML: ± 20 kV/µs TYP • PULSE WIDTH DISTORTION: |tPHL - tPLH| = 3 ns TYP
• HIGH SPEED RESPONSE:

10 Mbps

• HIGH ISOLATION VOLTAGE: BV: 2500 Vr.m.s.
• OPEN COLLECTOR OUTPUT TYPE
• SMALL OUTLINE PACKAGE:

5 PIN SOP

• TAPE AND REEL AVAILABLE: PS9714-F3, F4: 3500 Pcs/Reel • SAFETY STANDARDS: UL and VDE0884 approved

APPLICATIONS

• MEASUREMENT EQUIPMENT
• PDP
• F ACTORY AUTOMATION NETWORK ELECTRICAL CHARACTERISTICS (TA = -40 to +85°C unless otherwise specified) Coupled PART NUMBER PS9714 SYMBOLS PARAMETERS UNITS MIN TYP MAX VF Forward Voltage, IF = 10 mA, TA = 25°CV 1.4 1.65 1.9 IR Reverse Current, VR = 3 V, TA = 25°C µA1 0 Ct Terminal Capacitance, V = 0 V, f = 1 MHz, T A = 25°Cp F 3 0 IOH High Level Output Current, VCC = VO = 5.5 V, VF = 0.8 V µA 0.02 250 VOL Low Level Output Voltage, VCC = 5.5 V, IF = 5 mA, IO = 13 mA V 0.15 0.6 ICCH High Level Supply Current, VCC = 5.5 V, IF = 0 mA mA 3 8 ICCL Low Level Supply Current, VCC = 5.5 V, IF = 10 mA mA 7.0 11 IFHL Threshold Input Current, VCC = 5 V, VO = 0.8 V, RL = 350 Ω % 2.0 5.0 RI-O Isolation Resistance,Vin-out = 1kVDC, RH = 40 to 60%, TA = 25°C Ω 1011 CI-O Isolation Capacitance, V = 0, f = 1 MHz, TA = 25°Cp F 0.9 tPHL Propagation Delay Time, High → Low1,VCC = 5 V, IF = 7.5 mA, RL = 350 Ω ns 100 TA = 25°C5 4 7 5 tPLH Propagation Delay Time, Low → High1, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω ns 100 TA = 25°C5 1 7 5 tr Rise Time, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω ns 20 tf Fall Time, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω ns 10 PWD Pulse Width Distortion, V CC = 5 V, IF = 7.5 mA, RL = 350 Ω ns 3 50 tPSK Propagation Skew, VCC = 5 V, IF = 7.5 mA, RL = 350 Ω ns 60 CMH Common Mode Transient Immunity at High Level Output2 kV/µs1 0 2 0 VCC = 5 V, VCM = 1 kV, TA = 25°C, IF = 0 mA, VO (MIN) = 2 V CML Common Mode Transient Immunity at Low Level Output2 kV/µs1 0 2 0 VCC = 5 V, VCM = 1 kV, TA = 25°C, IF = 7.5 mA, VO (MAX) = 0.8 V Detector Diode Please see notes on the next page. California Eastern Laboratories

(TA = 25°C unless otherwise specified) PS9714 RECOMMENDED OPERATING CONDITIONS SYMBOLS PARAMETERS UNITS MIN TYP MAX VFL Low Level Input Voltage V 0 0.8 IFH High Level Input Current mA 6.3 12.5 VCC Supply Voltage V 4.5 5 5.5 N TTL (loads) (RL = 1kΩ)5 RL Pull-up Resistance Ω 330 4k PACKAGE OUTLINE (Units in mm) PIN CONNECTION (Top View) 1. Anode 2. Cathode 3. GND 4. V O 5. V CC SYMBOLS PARAMETERS UNITS RATINGS Diode IF Forward Current mA 30 VR Reverse Voltage V 3 Detector VCC Supply Voltage V 7 VO Output Voltage V 7 IO Output Current mA 25 PC Power Dissipation2 mW 40 BV Isolation Voltage 3 Vr.m.s. 2500 TA Operating Ambient Temp. °C -40 to +85 TSTG Storage Temperature °C -55 to +125 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Applies to output pin V O and power supply pin VCC. 2. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. 4.0±0.5 2.1±0.2 2.0 1.27 0.1 ± 0.1 0.4+0.10 -0.05 0.25 M 0.15+0.10 -0.05 7.0 ± 0.3 0.5 ± 0.3 4.4 1.3 543 MARKING 9714 N003 Week Assembled Year Assembled (Last 1 Digit) Rank Code 0 03N Assembly lot No. 1 Pin Mark Part Number Packing Style Safety Standards Approval PS9714 Magazine Case 100 pcs UL PS9714-F3 Embossed Tape 3500 pcs/reel Approved PS9714-F4 PS9714-V Magazine Case 100 pcs VDE0884 PS9714-V-F3 Embossed Tape 3500 pcs/reel Approved PS9714-V-F4

ORDERING INFORMATION

(Continued from first page.) Notes: 1. Typical values at TA = 25°C. 2. Because VOL of 2 V or more may be output when LED current input and when output supply of VCC = 2.6 V or less, it is important to confirm the characteristics (operation with the power supply on and off) during design, before using this device. 4. Test Circuit for Common Mode Transient Immunity: 3. Test Circuit for Propagation Delay Time: Pulse Input PW = 10 µs Duty Cycle = 1/10) Input (monitor) 47 Ω Vcc = 5 V RL = 350 Ω IF = 7.5 mA Output Input 50 % VOH 1.5 V VOL tPHL tPLH ( ( VO (monitor) CL 0.1 µF 10 % VO (IF = 0 mA) VO (IF = 7.5 mA) VOL 1 kV90 % 0 V VOH 2 V tr tf 0.8 V Vcc = 5 V RL VO (monitor) CL 0.1 µF VCM VCM GL SW IF *CL is approximately 15 pF which includes probe and stray wiring capacitance. USAGE CAUTIONS 1. Protect against static electricity when handling this product. 2. Bypass capacitor greater than 0.1 µF is used between V CC and GND near device (lead distance: 10 mm MAX). TYPICAL PERFORMANCE CURVES (TA = 25°C, unless otherwise specified) 02 04 0 6 08 0 10085 02 0 4 0 6 08 0 10085 MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) Maximum Forward Current, I F (mA) Detector Power Dissipation, P C (mW)

TA = +85°C +50°C +25°C 0°C -25°C 100 0.1 0.01 TYPICAL PERFORMANCE CURVES (TA = 25°C, unless otherwise specified) PS9714 -50 -25 0 25 50 75 100 ICCL (IF = 10 mA) ICCH (IF = 0 mA) VCC = 5.0 V, TA = 25°C RL = 350 Ω 1 .0 Ω 4 .0 kΩ, 4.7 kΩ 01 2345 6 IF = 5.0 mA VCC = 5.5 V IOL = 16.0 mA 13.0 mA 10.0 mA 6.0 mA -50 -25 0 25 50 75 100 0.6 0.5 0.4 0.3 0.2 0.1 VCC = 5.0 V VO = 0.6 V 2.5 2.0 1.5 1.0 0.5 -50 -25 0 25 50 75 100 RL = 350 Ω 1.0 Ω 4.7 kΩ, 4.0 kΩ 100 -50 -25 0 25 50 75 100 I F = 7 mA VCC = 5.0 V tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω tPHL: RL = 350 Ω, 1.0 kΩ FORWARD CURRENT vs. FORWARD VOLTAGE DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Forward Voltage, VF (V) Forward Current, I F (mA) Ambient Temperature, TA (°C) High Level Supply Current, I CCH (mA) Low Level Supply Current, I CCL (mA) OUTPUT VOLTAGE vs. INPUT CURRENT Output Voltage, V O (V) Input Current, IF (mA) Ambient Temperature, TA (°C) Low Level Output Voltage, V OL (V) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature, TA (°C) Threshold Input Current, I FHL (mA) PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE Propagation Delay Time, t PHL , t PLH (ns) Ambient Temperature, TA (°C) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE

TYPICAL PERFORMANCE CURVES (TA = 25°C, unless otherwise specified) PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE Ambient Temperature, TA (°C) Propagation Delay Time, t PHL , t PLH (ns) tPHL: RL = 4.0 kΩ tPHL: RL = 4.7 kΩ tPLH: RL = 4.0 kΩ tPLH: RL = 4.7 kΩIF = 7.5 mA VCC = 5.0 V 120 100 -50 -25 0 25 50 75 100 IF = 7 mA VCC = 5.0 V 4.0 kΩ 1.0 kΩ RL = 4.7 kΩ RL = 350 Ω -50 -25 0 25 50 75 100tPLH: RL = 4.0 kΩ tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ VCC = 5.0 V, TA = 25°C 120 100 05 7 9 1 1 13 15 IF = 7.5 mA VCC = 5.0 V tr: RL = 4.0 kΩ, 4.7 kΩ tr: RL = 1.0 kΩ tr: RL = 350 Ω tr: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ, 4.7 kΩ 400 300 200 100 -50 -25 0 25 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE Pulse Width Distortion, |t PHL PLH | (ns) PROPAGATION DELAY TIME vs. INPUT CURRENT Input Current, IF (mA) Propagation Delay Time, t PHL , t PLH (ns) SWITCHING TIME vs. AMBIENT TEMPERATURE Switching Time, t r, t f (ns)

Tape Outline and Dimensions Tape Direction Reel Outline and Dimensions 4.0±0.1 2.0±0.05 1.5 8±0.1 1.55±0.1 12±0.2 5.5±0.05 1.75±0.1

2.9 MAX

0.3 7.4±0.1 +0.1 4.6±0.1 2.4±0.1 PS9714-F3 PS9714-F4 Packing: 3500 pcs/reel 2.0 ± 0.5 1.5 ± 0.5 12.4 +2.0 -0.0 φ21.0 ± 0.8 6.0 ± 1 120° φ 330 φ80±5.0 φ13.0±0.5 60° 1.5 ± 0.1

These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 235 ûC or below (package surface temperature) • Time of temperature higher than 210 ºC 30 seconds or less

• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (2) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Time (s) Package Surface Temperature T (ßC) 100 to 160 ßC 60 to 120 s (preheating) (heating) to 10 s to 30 s 235 ßC (peak temperature) 210 ßC PS9714 A Business Partner of NEC Compound Semiconductor Devices, Ltd. 02/12/2003