PS9711-F3

PS9711 NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. © 1997, 2000 Document No. P13103EJ3V0DS00 (3rd edition) Date Published February 2000 NS CP(K) Printed in Japan PHOTOCOUPLER PS9711 HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 5-PIN SOP TOM PHOTOCOUPLER −NEPOC TM Series− The mark  shows major revised points.

DESCRIPTION

The PS9711 is an optically coupled high-speed, totem-pole output isolator containing a GaAlAs LED on light emitting diode (input) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip.

FEATURES

• High common mode transient immunity (CMH , CML = ±10 kV/µs TYP.)
• Small package (5-pin SOP)
• High-speed response (t PHL = 30 ns, tPLH = 35 ns TYP.)
• Pulse width distortion (tPHL – tPLH  = 7 ns TYP.)
• Totem-pole output (No pull-up resistor required)
• Ordering number of taping product: PS9711-E3, E4: 900 pcs/reel, PS9711-F3, F4 (Recommended): 3 500 pcs/reel

APPLICATIONS

• Computer and peripheral manufactures
• Measurement equipment
• P D P

Data Sheet P13103EJ3V0DS002 PS9711 PACKAGE DIMENSIONS (in millimeters) 1.27 0.1±0.1 2.1±0.2 4.4 7.0±0.3 0.5±0.3 0.15+0.10 –0.05 4.0±0.5 1. Anode 2. Cathode 3. GND 4. V O 5. VCC TOP VIEW INTERNAL OUT PUT CIRCUIT VCC (5) Vo (4) GND (3) LED Output ON L OFF H

Data Sheet P13103EJ3V0DS00 3 PS9711

ORDERING INFORMATION

Part Number Package Packing Style Application Part Number PS9711 5-pin SOP Magazine case 100 pcs PS9711 PS9711-E3 Embossed Tape 900 pcs/reel PS9711-E4 PS9711-F3 Embossed Tape 3 500 pcs/reel PS9711-F4 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (T A = 25 °°°°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current I F 30 mA Reverse Voltage V R 3.0 V Detector Supply Voltage V CC 7V Output Voltage V O 7V High Level Output Current IOH −5m A Low Level Output Current IOL 13 mA Power Dissipation PC 130 mW Isolation Voltage BV 2 500 Vr.m.s. Operating Ambient Temperature T A −40 to +85 °C Storage Temperature T stg −55 to +125 °C *1 TA = −40 to +85 °C *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. TYP. MAX. Unit High Level Input Current I FH 7.5 12.5 mA Low Level Input Current I FL 0 250 µA Supply Voltage V CC 4.5 5.0 5.5 V TTL (loads) N 3

Data Sheet P13103EJ3V0DS004 PS9711 ELECTRICAL CHARACTERISTICS (T A = −−−−40 to +85 °C, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F IF = 10 mA, TA = 25 °C 1.4 1.65 1.9 V Reverse Current I R VR = 3 V, TA = 25 °C1 0 µA Terminal Capacitance C t V = 0 V, f = 1 MHz, TA = 25 °C3 0 p F Detector High Level Output Current IOH VCC = VO = 5.5 V, IF = 250 µA 1 200 µA High Level Output Voltage VOH VCC = 4.5 V, IF = 250 µA, IOH = −2 mA 2.4 3.0 V Low Level Output Voltage V OL VCC = 4.5 V, IF = 7 mA, IO = 8 mA 0.38 0.6 V High Level Supply Current ICCH VCC = 5.5 V, IF = 0 mA 11 17 mA Low Level Supply Current ICCL VCC = 5.5 V, IF = 10 mA 12 18 mA High Level Output Short Circuit Current IOSH VCC = 5.5 V, VO = GND, IF = 0 mA, 10 ms or less –26 mA Low Level Output Short Circuit Current IOSL VCC = VO = 5.5 V, IF = 8 mA, 10 ms or less 34 mA Coupled Threshold Input Current I FHL VCC = 5 V T A = 25 °C2 . 0 5 m A (H → L) 6 Threshold Input Current I FLH VCC = 5 V T A = 25 °C0 . 5 m A (L → H) 0.35 Isolation Resistance R I-O VI-O = 1 kVDC , RH = 40 to 60 %, TA = 25 °C Ω Isolation Capacitance C I-O V = 0 V, f = 1 MHz, TA = 25 °C0 . 4 p F Propagation Delay Time t PHL TA = 25 °C 1 53 06 5n s (H → L) VCC = 5 V, IF = 7.5 mA 10 85 Propagation Delay Time t PLH TA = 25 °C 1 53 56 5n s (L → H) VCC = 5 V, IF = 7.5 mA 10 85 Pulse Width Distortion (PWD) tPHL-tPLH  VCC = 5 V, IF = 7.5 mA 7 35 ns Common Mode Transient Immunity at High Level Output CM H VCC = 5 V, TA = 25 °C, IF = 0 mA, VO (MIN.) = 2 V, VCM = 100 V 11 0 k V / µs Common Mode Transient Immunity at Low Level Output CM L VCC = 5 V, TA = 25 °C, IF = 7.5 mA, VO (MAX.) = 0.8 V, VCM = 100 V 11 0 k V / µs

Data Sheet P13103EJ3V0DS00 5 PS9711 *1 Typical values at TA = 25 °C *2 Test circuit for propagation delay time Input Output 1.5 V VOH VOL tPHL tPLH IF (ON) 50 % IF (ON) C L is approximately which includes probe and stray wiring capacitance. 47 Ω Pulse input (IF) VO (monitor) VCC = 5 V Input (monitor) 0.1 Fµ C L = 30 pF C L = 15 pF GND VCC 2.5 kΩ 1.3 kΩ(PW = 500 ns, Duty cycle = 1/2) VCC = 5 V *3 Test circuit for common mode transient immunity 90 % 10 % 100 V 0 V VOH 2 V 0.8 V VOL VCM VO (IF = 0 mA) VO (IF = 7.5 mA) tr tf C L is approximately which includes probe and stray wiring capacitance. VO (Monitor) VCC = 5 V 0.1 Fµ C L = 15 pF GL SW IF GND VCC USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of more than 0.1 µF is used between VCC and GND near device.

Data Sheet P13103EJ3V0DS006 PS9711 TYPICAL CHARACTERISTICS (T A = 25 °°°°C, unless otherwise specified) 1.0 0.01 0.1 100 1.2 20 40 60 80 1000 20 40 60 80 8585 1000 100 150 –50 –25 250 50 75 100 Forward Voltage V F (V) Forward Current IF (mA) FORWARD CURRENT vs. FORWARD VOLTAGE Ambient Temperature TA (˚C) Maximum Forward Current IF (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) Detector Power Dissipation PC (mW) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) High Level Output Voltage VOH (V) HIGH LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE High Level Output Current IOH (mA) High Level Output Voltage VOH (V) HIGH LEVEL OUTPUT VOLTAGE vs. HIGH LEVEL OUTPUT CURRENT TA = +85 ˚C +50 ˚C +25 ˚C 0 ˚C –25 ˚C VCC = 4.5 V, IF = 250 A, IOH = –2 mA µ Ambient Temperature TA (˚C) High Level Supply Current ICCH (mA), Low Level Supply Current ICCL (mA) SUPPLY CURRENT vs. AMBIENT TEMPERATURE –50 –25 0 25 50 75 100 20 V CC = 5.5 V, ICCH : IF = 0 mA, ICCL : IF = 10 mA ICCL ICCH µ VCC = 4.5 V, IF = 250 A TA = +85 ˚C +25 ˚C –40 ˚C

Data Sheet P13103EJ3V0DS00 7 PS9711 –50 0.0 0.2 0.1 0.3 0.5 0.7 0.9 0.4 0.6 0.8 1.0 –25 0 25 50 75 100 Low Level Output Current I OL (mA) Low Level Output Voltage VOL (V) LOW LEVEL OUTPUT VOLTAGE vs. LOW LEVEL OUTPUT CURRENT Forward Current IF (mA) Propagation Delay Time tPHL , tPLH (ns), Pulse Width Distortion tPHL – tPLH (ns) PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. FORWARD CURRENT Ambient Temperature TA (˚C) Propagation Delay Time tPHL , tPLH (ns), Pulse Width Distortion tPHL – tPLH (ns) PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) Low Level Output Voltage VOL (V) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) Threshold Input Current IFHL , IFLH (mA) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE –50 –25 0 25 50 75 100 –50 –25 00 25 50 75 100 VCC = 4.5 V, IF = 7 mA, IO = 8mA VCC = 5 V VCC = 5 V, IF = 7.5 mA IFHL IFLH tPLH tPHL PWD 1051 5 VCC = 4.5 V, IF = 7 mA TA = +85 ˚C +25 ˚C –40 ˚C –20 –30 –10 5 1 01 52 02 5 VCC = 5 V tPLH tPHL PWD Remark The graphs indicate nominal characteristics.

Data Sheet P13103EJ3V0DS008 PS9711 TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) Outline and Dimensions (Tape) 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.15.5±0.1 12.0±0.2 4.6±0.1 2.4±0.1 7.4±0.1 0.3 8.0±0.1 Tape Direction PS9711-E3 PS9711-E4 Packing: 900 pcs/reel 180 13.0±0.5 2.0 21.0±0.8 13.0±1.0 2.0±0.5 13.0±0.5 15˚ 15˚

Data Sheet P13103EJ3V0DS00 9 PS9711 Outline and Dimensions (Tape) 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.15.5±0.1 12.0±0.2 4.6±0.1 2.4±0.1 7.4±0.1 0.3 8.0±0.1 Tape Direction PS9711-F3 PS9711-F4 Outline and Dimensions (Reel) Packing: 3 500 pcs/reel 12.4+2.0 –0.0 80±5.0φ 13.0±0.5φ 330φ1.5±0.5 2.0±0.5 6.0±1 21.0±0.8φ 120˚ 60 ˚ 1.5

Data Sheet P13103EJ3V0DS0010 PS9711 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

• Peak reflow temperature 235 °C or below (package surface temperature)
• Time of temperature higher than 210 °C 30 seconds or less
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) 60 to 120 s (preheating) 210 ˚C 100 to 160 ˚C Package Surface Temperature T (˚C) Time (s) (heating) to 10 s to 30 s 235 ˚C (peak temperature) Recommended Temperature Profile of Infrared Reflow (2) Dip soldering
• Temperature 260 °C or below (molten solder temperature)
• Time 10 seconds or less
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions
• F l u x e s Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

Data Sheet P13103EJ3V0DS00 11 PS9711 [MEMO]

Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEPOC is a trademark of NEC Corporation.

• The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
• No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.
• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
• Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information.
• While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features.
• NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8