PS9701-F3

PS9701 NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. P11437EJ4V0DS00 (4th edition) Date Published September 1999 NS CP(K) Printed in Japan PHOTOCOUPLER PS9701 HIGH SPEED DIGITAL OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER The mark  shows major revised points. −NEPOC TM Series− © 1994, 1999

DESCRIPTION

The PS9701 is an optically coupled isolator containing a GaAlAs LED on light emitting side (input side) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip. This is SOP (Small Outline Package) type for high-density applications.

FEATURES

• High isolation voltage (BV = 2 500 Vr.m.s.)
• Small and thin package (5-pin SOP)
• High-speed response (t PHL = 36 ns TYP., tPLH = 60 ns TYP.)
• Low threshold input current (IFHL = 2.5 mA TYP.)
• Open-collector type
• Ordering number of taping product: PS9701-1-E3, E4, F3, F4
• UL approved: File No. E72422 (S)
• VDE0884 approved (Option)

APPLICATIONS

• Computer and peripheral manufactures
• Measurement equipment
• Audio-Visual

Data Sheet P11437EJ4V0DS002 PS9701 1.27 2.00.1±0.1 2.1±0.2 4.4 7.0±0.3 0.5±0.3 0.15+0.10 –0.05 PACKAGE DIMENSIONS in millimeters TOP VIEW 1. Anode 3. Cathode 4. GND 5. V O 6. VCC 4.0±0.5

Data Sheet P11437EJ4V0DS00 3 PS9701

ORDERING INFORMATION

Part Number Package Packing Style Safety Standards Approval Application Part Number PS9701 5-pin SOP Magazine case 100 pcs UL approved PS9701 PS9701-E3 Embossed Tape 900 pcs/reel PS9701-E4 PS9701-F3 Embossed Tape 3 500 pcs/reel PS9701-F4 PS9701-V Magazine case 100 pcs VDE0884 approved PS9701-V-E3 Embossed Tape 900 pcs/reel PS9701-V-E4 PS9701-V-F3 Embossed Tape 3 500 pcs/reel PS9701-V-F4 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (T A = 25 °°°°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current I F 30 mA Reverse Voltage V R 5V Detector Supply Voltage V CC 7V Output Voltage V O 7V Output Current I O 50 mA Power Dissipation P C 85 mW Isolation Voltage BV 2 500 Vr.m.s. Operating Ambient Temperature T A –40 to +85 °C Storage Temperature T stg –55 to +125 °C *1 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. TYP. MAX. Unit Low Level Input Current I FL 0 250 µA High Level Input Current I FH 57 . 5 1 5 m A Supply Voltage V CC 4.5 5.0 5.5 V Operating Ambient Temperature T A 02 5 7 0 °C Remark By-pass capacitor of more than 0.1 µF is used between VCC and GND near the device.

Data Sheet P11437EJ4V0DS004 PS9701 ELECTRICAL CHARACTERISTICS (T A = 0 to +70 °°°°C, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F IF = 10 mA, TA = 25 °C 1.4 1.65 1.9 V Reverse Current I R VR = 5 V, TA = 25 °C1 0 µA Terminal Capacitance C t V = 0 V, f = 1 MHz, TA = 25 °C6 0 p F Detector High Level Output Current IOH VCC = VO = 5.5 V, IF = 250 µA 2 250 µA Low Level Output Voltage V OL VCC = 5.5 V, IF = 7.5 mA, IO = 13 mA 0.3 0.6 V High Level Supply Current ICCH VCC = 5.5 V, IF = 0 mA 4 6 8 mA Low Level Supply Current I CCL VCC = 5.5 V, IF = 10 mA 9 12 15 mA IFHL TA = 25 °C 0.5 2.5 5.0Coupled Threshold Input Current (H → L) VCC = 5 V, VO = 0.8 V, RL = 350 Ω 7 mA Isolation Resistance R I-O VI-O = 1 kVDC , RH = 40 to 60 %, TA = 25 °C Ω Isolation Capacitance C I-O V = 0 V, f = 1 MHz, TA = 25 °C0 . 6 p F Propagation Delay Time (H → L) tPHL VCC = 5 V, IF = 7.5 mA, RL = 350 Ω , C L = 15 pF, TA = 25 °C 36 75 ns Propagation Delay Time (L → H) tPLH 60 75 Rise Time t r 20 Fall Time t f 10 *1 Test circuit for propagation delay time (PW = 1 s Duty Cycle = 1/10) Pulse Input IF Monitor 0.1 F R L = 350 Ω VO C L 51 Ω Input 5 V 350 mV (IF = 7.5 mA) 175 mV (IF = 3.75 mA) IF Output VCC = 5 V1 µµ tPHL tPLH 1.5 V VOL Remark C L is approximately 15 pF, which includes probe and stray wiring capacitance.

Data Sheet P11437EJ4V0DS00 5 PS9701 TYPICAL CHARACTERISTICS (T A = 25 °C, unless otherwise specified) Ambient Temperature TA (˚C) Maximum Forward Current IF (mA) AMBIENT TEMPERATURE Ambient Temperature TA (˚C) Power Dissipation PC (mW) POWER DISSIPATION vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) Normalized Threshold Input Current IFHL vs. AMBIENT TEMPERATURE Forward Voltage VF (V) Forward Current IF (mA) FORWARD CURRENT vs. FORWARD VOLTAGE Forward Current IF (mA) Output Voltage VO (V) 20 40 60 80 100 MAXIMUM FORWARD CURRENT vs. 100 20 40 60 80 100 0.01 0.1 1.0 100 0.0 –25 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 25 50 75 100 Normalized to 1.0 at TA = 25 ˚C, VCC = 5 V, VO = 0.8 V, RL = 350 Ω NORMALIZED THRESHOLD INPUT CURRENT 0 2468 1 0 1 2 –25–50 IF = 7.5 mA, VCC = 5.5 V 5 mA IOL = 13 mA Ambient Temperature TA (˚C) Low Level Output Voltage VOL (V) AMBIENT TEMPERATURE LOW LEVEL OUTPUT VOLTAGE vs. 0.00 0.75 1.00 1.25 1.50 0.50 0.25 –25 0 25 50 75 100–50 5 V R L VO TA = 100 ˚C 50 ˚C 25 ˚C 0 ˚C –25 ˚C FORWARD CURRENT OUTPUT VOLTAGE vs. R L = 100 Ω 350 Ω 1 kΩ

Data Sheet P11437EJ4V0DS006 PS9701 Load Resistance RL (Ω ) Propagation Delay Time tPHL , tPLH (ns) PROPAGATION DELAY TIME vs. LOAD RESISTANCE Ambient Temperature TA (˚C) PROPAGATION DELAY TIME vs. SWITCHING TIME vs. AMBIENT TEMPERATURE Propagation Delay Time tPHL , tPLH (ns) Ambient Temperature TA (˚C) Switching Time tr, tf (ns) AMBIENT TEMPERATURE Forward Current IF (mA) FORWARD CURRENT 0 5 10 15 20 25 t PLH tPHL Propagation Delay Time tPHL , tPLH (ns) PROPAGATION DELAY TIME vs. 100 500 1 k 5 k 10 k 50 k 100 500 1 000 IF = 7.5 mA, VCC = 5 V, PW = 1 s, duty 1/10 t PHL tPLH µ –50 –25 0 25 50 75 100 tPLH tPHL IF = 7.5 mA, VCC = 5 V, R L = 350 Ω 100 120 –50 –25 0 25 50 75 100 25 IF = 7.5 mA, VCC = 5 V, R L = 350 Ω tf tr VCC = 5 V, R L = 350 Ω Remark The graphs indicate nominal characteristics.

Data Sheet P11437EJ4V0DS00 7 PS9701 TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) Outline and Dimensions (Tape) 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.15.5±0.1 12.0±0.2 4.6±0.1 2.4±0.1 7.4±0.1 0.3 8.0±0.1 Tape Direction PS9701-E3 PS9701-E4 Packing: 900 pcs/reel 180 13.0±0.5 2.0 21.0±0.8 13.0±1.0 2.0±0.5 13.0±0.5 15˚ 15˚

Data Sheet P11437EJ4V0DS008 PS9701 Outline and Dimensions (Tape) 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.15.5±0.1 12.0±0.2 4.6±0.1 2.4±0.1 7.4±0.1 0.3 8.0±0.1 Tape Direction PS9701-F3 PS9701-F4 Outline and Dimensions (Reel) Packing: 3 500 pcs/reel 12.4+2.0 –0.0 80±5.0φ 13.0±0.5φ 330φ1.5±0.5 2.0±0.5 6.0±1 21.0±0.8φ 120˚ 60 ˚ 1.5

Data Sheet P11437EJ4V0DS00 9 PS9701 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

• Peak reflow temperature 235 °C (package surface temperature)
• Time of temperature higher than 210 °C 30 seconds or less
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) 60 to 90 s (preheating) 210 ˚C 120 to 160 ˚C Package Surface Temperature T (˚C) Time (s) (heating) to 10 s to 30 s 235 ˚C (peak temperature) Recommended Temperature Profile of Infrared Reflow (2) Dip soldering
• Temperature 260 °C or below (molten solder temperature)
• Time 10 seconds or less
• Number of times One
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions
• F l u x e s Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

Data Sheet P11437EJ4V0DS0010 PS9701 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884) Parameter Symbol Speck Unit Application classification (DIN VDE 0109) for rated line voltages ≤ 300 Vr.m.s. IV for rated line voltages ≤ 600 Vr.m.s. III Climatic test class (DIN IEC 68 Teil 1/09.80) 40/085/21 Dielectric strength maximum operating isolation voltage. Test voltage (partial discharge test procedure a for type test and random test) UIORM 710 V peak U pr = 1.2 × UIORM , Pd < 5 pC U pr 850 V peak Test voltage (partial discharge test procedure b for random test) U pr = 1.6 × UIORM , Pd < 5 pC U pr 1 140 V peak Highest permissible overvoltage U TR 4 000 V peak Degree of pollution (DIN VDE 0109) 2 Clearance distance > 5 mm Creepage distance > 5 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI 175 Material group (DIN VDE 0109) III a Storage temperature range T stg –55 to +125 °C Operating temperature range T A –40 to +85 °C Isolation resistance, minimum value VIO = 500 V dc at TA = 25 °CR i s M I N . 1 0 Ω VIO = 500 V dc at TA MAX. at least 100 °CR i s M I N . 1 0 Ω Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Tsi 150 °C Current (input current IF, Psi = 0) Isi 200 mA Power (output or total power dissipation) Psi 300 mW Isolation resistance VIO = 500 V dc at TA = 175 °C (Tsi) Ris MIN. 10 Ω

Data Sheet P11437EJ4V0DS00 11 PS9701 [MEMO]

Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEPOC is a trademark of NEC Corporation.

• The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
• No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.
• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
• Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information.
• While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features.
• NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8