PS9614

PS9614 NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

FEATURES

NEC's HIGH NOISE REDUCTION HIGH SPEED DIGITAL OUTPUT TYPE

8 PIN DIP OPTOCOUPLER

DESCRIPTION

NEC's PS9614 and PS9614L are optically coupled isolators containing a GaAIAs LED on the light emitting diode (input) side and a photodiode and a signal procesing circuit on the detector (output) side on one chip. The PS9614 is in a plastic DIP (Dual In-line Package) and the PS9614L is a lead-bending type (Gull-wing) for surface mount.

• HIGH COMMON MODE TRANSIENT IMMUNITY: C MR, CML: ± 20 kV/µs TYP
• HIGH SPEED RESPONSE:

10 Mbps

• HIGH ISOLATION VOLTAGE: BV: 3750 Vr.m.s. MIN
• OPEN COLLECTOR OUTPUT TYPE
• TAPE AND REEL AVAILABLE: PS9614L-E3, E4: 1000 Pcs/Reel APPLICATIONS
• MEASUREMENT EQUIPMENT
• PDP
• F ACTORY AUTOMATION NETWORK ELECTRICAL CHARACTERISTICS (TA = -40~+85°C unless otherwise specified) Coupled PART NUMBER PS9614, PS9614L SYMBOLS PARAMETERS UNITS MIN TYP MAX VF Forward Voltage, IF = 10 mA, TA = 25°CV 1.4 1.65 1.9 IR Reverse Current, VR = 5 V, TA = 25°C µA1 0 Ct Terminal Capacitance, V = 0V, f = 1 MHz, T A = 25°Cp F 3 0 IOH High Level Output Current, VCC = VO = 5.5 V, VF = 0.8 V µA 0.03 250 VOL Low Level Output Voltage, VCC = 5.5 V, IF = 5 mA, IO = 13 mA V 0.2 0.6 ICCH High Level Supply Current, VCC = 5.5 V, IF = 0 mA mA 2.6 8 ICCL Low Level Supply Current, VCC = 5.5 V, IF = 10 mA mA 7 11 IFHL Threshold Input Current, VCC = 5 V, VO = 0, 0.8 V, RL = 350 Ω % 2.3 5 RI-O Isolation Resistance,Vin-out = 1k VDC, RH = 40 to 60%, TA = 25°C Ω 1011 CI-O Isolation Capacitance, V = 0, f = 1 MHz, TA = 25°Cp F 0.9 tPHL Propagation Delay Time, High → Low1,VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 61 75 TA = 25°C 100 tPLH Propagation Delay Time, Low → High1, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 51 75 TA = 25°C 100 tr Rise Time, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 20 tf Fall Time, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 8 PWD Pulse Width Distortion, V CC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 10 50 tPSK Propagation Skew, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 60 CMH Common Mode Transient Immunity at High Level Output2 kV/µs1 0 2 0 VCC = 5 V, VCM = 1 kV, TA = 25°C, IF = 0 mA, VO (MIN) = 2 V, RL = 350 Ω CML Common Mode Transient Immunity at Low Level Output2 kV/µs1 0 2 0 VCC = 5 V, VCM = 1 kV, TA = 25°C, IF = 0 mA, VO (MIN) = 0.8 V, RL = 350 Ω Detector Diode Please see notes on the next page. California Eastern Laboratories

SYMBOLS PARAMETERS UNITS RATINGS Diode IF Forward Current mA 30 VR Reverse Voltage V 3 Detector VCC Supply Voltage V 7 VO Output Voltage V 7 IO Output Current mA 25 PC Power Dissipation mW 40 BV Isolation Voltage 2 Vr.m.s. 3750 TA Operating Ambient Temp. °C -40 to +85 TSTG Storage Temperature °C -55 to +125 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) PS9614, PS9614L Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. RECOMMENDED OPERATING CONDITIONS SYMBOLS PARAMETERS UNITS MIN TYP MAX VFL Low Level Input Voltage V 0 0.8 IFH High Level Input Current mA 6.3 10 12.5 VCC Supply Voltage V 4.5 5 5.5 N TTL (loads) (RL = 1kΩ)5 RL Pull-up Resistance Ω 330 4k TA Operating Ambient -40 +85 Temperature Note: 1. Test Circuit for Propagation Delay Time: 2. Test Circuit for Common Mode Transient Immunity: *CL is approximately 15 pF which includes probe and stray wiring capacitance. USAGE CAUTIONS 1. Protect against static electricity when handling this product. 2. Bypass capacitor greater than 0.1 µF is used between V CC and GND near device (lead distance: 10 mm MIN). (Continued from previous page.) Input Output 1.5 V VOH VOL tPHL tPLH (IF = 7.5 mA) 50% 0 V 5 V CL includes probe and stray wiring capacitance. 47 Ω Pulse input (IF) Input (monitor) (PW = 1 s, Duty cycle = 1/10) µ RL = 350 Ω VO (monitor) VCC = 5 V 0.1 Fµ CL = 15 pF 90% 10% 1 kV 0 V VOH 2 V 0.8 V VOL VCM VO (IF = 0 mA) VO (IF = 7.5 mA) tr tf VO (monitor) VCC = 5 V 0.1 Fµ CL = 15 pF VCM RL = 350 Ω SW IF CL includes probe and stray wiring capacitance. PS9614 M003 No. 1 pin Mark Rank Code Year Assembled (Last 1 Digit) Week Assembled M 0 03 Assembly Lot Country Assembled Type Number MARKING LED Output ON L OFF H Shield FUNCTIONAL DIAGRAM

PS9614, PS9614L 20 40 60 80 1000 85 20 40 60 80 1000 1.0 0.01 0.1 100 TA = +85˚C +50˚C +25˚C 0˚C –25˚C –50 –25 0 25 50 75 1000 ICCL (IF = 10 mA) ICCH (IF = 0 mA) 12 3 45 6 VCC = 5.0 V, TA = 25˚C RL = 350 Ω 1.0 kΩ 4.0 kΩ –50 –25 0 25 50 75 100 IF = 5.0 mA, VCC = 5.5 V 0.6 0.5 0.4 0.3 0.2 0.1 13.0 mA 10.0 mA 6.0 mA IOL = 16.0 mA TYPICAL PERFORMANCE CURVES (TA = 25°C) Maximum Forward Current, I F (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Detector Power Dissipation, P C (mW) Ambient Temperature, TA (°C) Ambient Temperature, T A (°C) SUPPLY CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature, TA (°C) High Level Supply Current, I CCH (mA) Low Level Supply Current, I CCL (mA) Forward Voltage, VF (V) Forward Current, I F (mA) FORWARD CURRENT vs. FORWARD VOLTAGE OUTPUT VOLTAGE vs. FORWARD CURRENT Forward Current, IF (mA) Output Voltage, V O (V) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE Ambient Temperature, TA (°C) Low Level Output Voltage, V OL (V)

VCC = 5.0 V, VO = 0.8 V –50 –25 0 25 50 75 100 1.0 kΩ RL = 350 Ω 4.0 kΩ 120 100 –50 –25 0 25 50 75 100 IF = 7.5 mA, VCC = 5.0 V tPHL: RL = 4.0 kΩ tPLH: RL = 4.0 kΩ 100 –50 –25 0 25 50 75 100 IF = 7.5 mA, VCC = 5.0 V tPHL: RL = 350 Ω tPHL: RL = 1.0 kΩ tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω –50 –25 0 25 50 75 100 IF = 7.5 mA, VCC = 5.0 V RL = 4.0 kΩ RL = 350 Ω RL = 1.0 kΩ –50 –25 0 25 50 75 100 400 350 300 250 200 150 100 IF = 7.5 mA, VCC = 5.0 V tr: RL = 4.0 kΩ tr: RL = 1.0 kΩ tr: RL = 350 Ω tf: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ 151311975 VCC = 5.0 V, TA = 25˚C tPLH: RL = 4.0 kΩ tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω tPHL: RL = 350 Ω tPHL: RL = 4.0 kΩ 1.0 kΩ PS9614, PS9614L TYPICAL PERFORMANCE CURVES (TA = 25°C) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE SWITCHING TIME vs. AMBIENT TEMPERATURE PROPAGATION DELAY TIME vs. FORWARD CURRENT Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) Ambient Temperature, T A (°C) Ambient Temperature, TA (°C) Forward Current, IF (mA) Threshold Input Current, I FHL (mA) Propagation Delay Time, t PHL , t PLH (ns) Pulse Width Distortion, |t PHL PLH | (ns) Propagation Delay Time, t PHL , t PLH (ns) Switching Time, t r, t f (ns) Propagation Delay Time, t PHL , t PLH (ns)

TYPICAL PERFORMANCE CURVES (TA = 25°C) PS9614, PS9614L Forward Current, IF (mA) Forward Current, IF (mA) Pulse Width Distortion, |t PHL PLH | (ns) Switching Time, t r, t f (ns) PULSE WITH DISTORTION vs. FORWARD CURRENT SWITCHING TIME vs. FORWARD CURRENT TAPING SPECIFICATIONS (Units in mm) Tape Outline and Dimensions Tape Direction Reel Outline and Dimensions 4.0 ± 0.1 2.0 ± 0.1 1.55 ± 0.1 16.0 ± 0.3

4.5 MAX

0.3 10.3 ± 0.1 12.0 ± 0.1 PS9614L-E3 PS9614L-E4 2.0 ± 0.5 φ13.0 ± 0.5 φ21.0 ± 0.8 R1.0 φ100 ± 1.0 φ330 15.9 to 19.4 outer edge of flange 2.0±0.5 Packing: 1000 pcs/reel –50 –25 0 25 50 75 100 RL = 350 Ω RL = 1.0 kΩ VCC = 5.0 V RL = 4.0 kΩ 151311975 350 300 250 200 150 100 IF = 7.5 mA VCC = 5.0 V tr: RL = 4.0 kΩ tr: RL = 1.0 kΩ tr: RL = 350 Ω tr: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ Note: Graphs indicate nominal characteristics.

PACKAGE OUTLINE (Units in mm)

10.16 MAX

0.25 M 1.25 ± 0.10 0.50 ± 0.10 7.62 0 to 15˚

3.8 MAX

2.8 MAX

4.55 MAX

0.65 2.54 6.5 1.25±0.10 0.9±0.25 0.05~0.2 9.60±0.40.25 M 8 5 2.54 6.5 PS9614 PS9614L PIN CONNECTION (Top View) PIN CONNECTION (Top View) 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. V O 7. NC 8. V CC 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. V O 7. NC 8. V CC PS9614, PS9614L

PS9614, PS9614L RECOMMENDED SOLDERING CONDITIONS (3) Cautions

• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Time (s) Package Surface Temperature T (˚C) 120 ˚C 120–30 s (preheating) (heating) to 10 s to 60 s 260˚C (peak temperature) 220˚C (1) Infrared reflow soldering
• Peak reflow temperature 260 ˚C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220 ºC 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (2) Wave Soldering
• T emperature 260 °C or below
• T ime 10 seconds or less
• Preheating conditions 120 °C or below (package surface temperature
• Number of times One (allowed to be dipped in solder including plastic mold portion)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. A Business Partner of NEC Compound Semiconductor Devices, Ltd. 10/14/2003