PS9117A NEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
2006, 2008 1. Anode 2. Cathode 3. GND 4. V O 5. VCC PIN CONNECTION (Top View) The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
DESCRIPTION
The PS9117A is an optically coupled high- speed, active low type isolator c ontaining a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. The PS9117A is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion. The PS9117A is suitable for high density application.
FEATURES
- Pulse width distortion ( ⏐tPHL − tPLH⏐ = 35 ns MAX.) High common mode transient immunity (CM H, CML = ±15 kV/μs MIN.) Small package (SO-5) High-speed (10 Mbps) High isolation voltage (BV = 3 750 Vr.m.s.) Open collector output Ordering number of taping pr oduct: PS9117A-F3: 2 500 pcs/reel Pb-Free product Safety standards UL approved: File No. E72422 DIN EN60747-5-2 (VDE0884 Part 2) approved No. 40008902 (Option)
APPLICATIONS
Measurement equipment PDP FA Network TRUTH TABLE LED Output ON L OFF H DATA SHEET The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. PHOTOCOUPLER PS9117A HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 5-PIN SOP (SO-5) HIGH-SPEED PHOTOCOUPLER −NEPOC Series− Document No. PN10646EJ04V0DS (4th edition) Date Published July 2008 NS Printed in Japan
PACKAGE DIMENSIONS (UNIT: mm) 1.27 0.4+0.10 –0.05 0.25 M 0.1±0.1 2.6±0.2 4.4 7.0±0.3 0.5±0.3 0.15+0.10 –0.05 3.4 +0.3 –0.153 MARKING EXAMPLE No. 1 pin Mark Initial of NEC (Engraved mark) Rank Code Year Assembled (Last 1 Digit) Week Assembled N 8 31 117A N831 N *1 *1 Bar : Pb-Free Type Number Assembly Lot No. 1 pin Mark Initial of NEC (Engraved mark) Rank Code Year Assembled (Last 1 Digit) Week Assembled N 8 31 117A N831 N *1 *1 Bar : Pb-Free Type Number Assembly Lot SnBi PLATING Ni/Pd/Au PLATING <R> Data Sheet PN10646EJ04V0DS 2 PS9117A
ORDERING INFORMATION
Part Number Order Number Solder Plating Specification Packing Style Safety Standards Approval Application Part Number PS9117A PS9117A-A Pb-Free 20 pcs (Tape 20 pcs cut) St andard products PS 9117A PS9117A-F3 PS9117A-F3-A (SnBi) Embossed Tape 2 500 pcs/reel (UL approved) PS9117A-V PS9117A-V-A 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS9117A-V-F3 PS9117A-V-F3-A Embossed Tape 2 500 pcs/reel (VDE 0884 Part2) approved (Option) PS9117A PS9117A-AX Pb-Free 20 pcs (Tape 20 pcs cut) St andard products PS9117A-F3 PS9117A-F3-AX (Ni/Pd/Au) Embossed Tape 2 500 pcs/reel (UL approved) PS9117A-V PS9117A-V-AX 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS9117A-V-F3 PS9117A-V-F3-AX Embossed Tape 2 500 pcs/reel (VDE 0884 Part2) approved (Option) *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current I F 30 mA Reverse Voltage V R 5 V Detector Supply Voltage V CC 7 V Output Voltage V O 7 V Output Current I O 25 mA Power Dissipation P C 40 mW Isolation Voltage BV 3 750 Vr.m.s. Operating Ambient Temperature T A −40 to +85 °C Storage Temperature T stg −55 to +125 °C *1 Reduced to 0.3 mA/ °C at TA = 25°C or more. *2 Applies to output pin V O (collector pin). Reduced to 1.5 mW/°C at TA = 65°C or more. *3 AC voltage for 1 minute at T A = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-5 shorted together. RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. TYP. MAX. Unit Low Level Input Voltage V FL 0 0.8 V High Level Input Current I FH 6.3 10 12.5 mA Supply Voltage V CC 4.5 5.0 5.5 V TTL (RL = 1 kΩ, loads) N 5 Pull-up Resistor R L 330 4 k Ω <R> Data Sheet PN10646EJ04V0DS 3 PS9117A
ELECTRICAL CHARACTERISTICS (TA = −40 to +85°C, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F I F = 10 mA, TA = 25°C 1.4 1.65 1.8 V Reverse Current I R V R = 3 V, TA = 25°C 10 μA Terminal Capacitance C t V = 0 V, f = 1 MHz, T A = 25°C 30 pF Detector High Level Output Current I OH V CC = VO = 5.5 V, VF = 0.8 V 1 100 μA Low Level Output Voltage V OL V CC = 5.5 V, IF = 5 mA, IOL = 13 mA 0.2 0.6 V High Level Supply Current I CCH V CC = 5.5 V, IF = 0 mA, VO = open 4 7 mA Low Level Supply Current I CCL V CC = 5.5 V, IF = 10 mA, VO = open 6 10 Coupled Threshold Input Current I FHL V CC = 5 V, VO = 0.8 V, RL = 350 Ω 2 5 (H → L) Isolation Resistance R I-O V I-O = 1 kVDC, RH = 40 to 60%, TA = 25°C Ω Isolation Capacitance C I-O V = 0 V, f = 1 MHz, T A = 25°C 0.6 pF Propagation Delay Time t PHL T A = 25°C 40 75 ns (H → L) 100 Propagation Delay Time t PLH T A = 25°C 45 75 (L → H) 100 Rise Time t r V CC = 5 V, RL = 350 Ω, IF = 7.5 mA, 20 Fall Time t f V THHL = VTHLH = 1.5 V 5 Pulse Width Distortion (PWD) ⏐tPHL-tPLH⏐ 5 35 Propagation Delay Skew t PSK 40 Common Mode Transient Immunity at High Level Output CMH V CC = 5 V, RL = 350 Ω, TA = 25°C, IF = 0 mA, VO > 2 V, VCM = 1 kV 15 20 kV/ μs Common Mode Transient Immunity at Low Level Output CML V CC = 5 V, RL = 350 Ω, TA = 25°C, IF = 7.5 mA, VO < 0.8 V, VCM = 1 kV 15 20 kV/ μs <R> Data Sheet PN10646EJ04V0DS 4 PS9117A
*1 Typical values at T A = 25°C *2 Because V OL of 2 V or more may be output when LED current input and when output supply of VCC = 2.6 V or less, it is important to confirm the characteristics (operation with the power supply on and off) during design, before using this device. *3 Test circuit for propagation delay time Input Output 1.5 V VOL tPHL tPLH (IF = 7.5 mA) 50% 47 Ω Pulse input (IF) VO (monitor) VCC = 5 V Input (monitor) 0.1 Fμ CL = 15 pF RL = 350 Ω(PW = 1 s, Duty cycle = 1/10) μ Remark C L includes probe and stray wiring capacitance. *4 Test circuit for common mode transient immunity 90% 10% 1 kV 0 V VOH 2 V 0.8 V VOL VCM VO (IF = 0 mA) VO (IF = 7.5 mA) tr tfVO (monitor) VCC = 5 V 0.1 Fμ CL = 15 pF SW VCM IF RL = 350 Ω Remark C L includes probe and stray wiring capacitance. USAGE CAUTIONS 1. This product is weak for static el ectricity by designed with hi gh-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high te mperature and high humidity. Data Sheet PN10646EJ04V0DS 5 PS9117A
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) 20 40 60 80 1000 85 Ambient Temperature TA (˚C) Maximum Forward Current IF (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 20 40 60 80 85 1000 Ambient Temperature TA (˚C) Detector Power Dissipation PC (mW) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 1.0 0.01 0.1 100 TA = +85˚C +50˚C +25˚C 0˚C –25˚C Forward Voltage VF (V) Forward Current IF (mA) FORWARD CURRENT vs. FORWARD VOLTAGE –50 –25 0 25 50 75 100 IF = 5.0 mA, VCC = 5.5 V 0.6 0.5 0.4 0.3 0.2 0.1 IOL = 16.0 mA 13.0 mA 10.0 mA 6.0 mA Ambient Temperature TA (˚C) Low Level Output Voltage VOL (V) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE 123456 RL = 350 Ω VCC = 5.0 V 1.0 kΩ 4.0 kΩ, 4.7 kΩ Forward Current IF (mA) Output Voltage VO (V) OUTPUT VOLTAGE vs. FORWARD CURRENT –50 –25 0 25 50 75 1000 ICCL (IF = 10 mA) ICCH (IF = 0 mA) Ambient Temperature TA (˚C) High Level Supply Current ICCH (mA) Low Level Supply Current ICCL (mA) SUPPL Y CURRENT vs. AMBIENT TEMPERATURE Remark The graphs indicate nominal characteristics. Data Sheet PN10646EJ04V0DS 6 PS9117A
VCC = 5.0 V, VO = 0.6 V 0–50 –25 0 25 50 75 100 1.0 kΩ RL = 350 Ω 4.0 kΩ Ambient Temperature TA (˚C) Threshold Input Current IFHL (mA) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE 100 0–50 –25 0 25 50 75 100 IF = 7.5 mA, VCC = 5.0 V tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ, 4.7 kΩ tPLH: RL = 4.7 kΩ tPLH: RL = 4.0 kΩ tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω Ambient Temperature TA (˚C) Propagation Delay Time tPHL, tPLH (ns) PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) Pulse Width Distortion tPHL–tPLH (ns) PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE –50 –25 0 25 50 75 100 IF = 7.5 mA, VCC = 5.0 V RL = 4.7 kΩ RL = 4.0 kΩ RL = 350 Ω RL = 1.0 kΩ Forward Current IF (mA) Propagation Delay Time tPHL, tPLH (ns) PROPAGATION DELAY TIME vs. FORWARD CURRENT 7 9 11 13 155 100 tPLH: RL = 4.7 kΩ tPLH: RL = 4.0 kΩtPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ, 4.7 kΩ VCC = 5.0 V Remark The graphs indicate nominal characteristics. Data Sheet PN10646EJ04V0DS 7 PS9117A
TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) Tape Direction PS9117A-F3 Outline and Dimensions (Reel) Packing: 2 500 pcs/reel 100±1.0φ 13.0±0.2φ 330±2.0φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 1.55±0.1 2.0±0.05 4.0±0.1 1.75±0.1 3.9±0.1 3.45 MAX. 7.4±0.1 0.3±0.058.0±0.1 1.5+0.1 5.5±0.1 12.0±0.2 3.0±0.1 Data Sheet PN10646EJ04V0DS 8 PS9117A
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 1.45 0.81.27 5.5 <R> Data Sheet PN10646EJ04V0DS 9 PS9117A
- Recommended soldering conditions (1) Infrared reflow soldering Peak reflow temperature 260 °C or below (package surface temperature) Time of peak reflow temperature 10 seconds or less Time of temperature higher than 220°C 60 seconds or less Time to preheat temperature from 120 to 180°C 120 ±30 s Number of reflows Three Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 120±30 s (preheating) 220˚C 180˚C Package Surface Temperature T (˚C) Time (s) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s to 60 s 260˚C MAX. 120˚C (2) Wave soldering Temperature 260 °C or below (molten solder temperature) Time 10 seconds or less Preheating conditions 120 °C or below (package surface temperature) Number of times One (Allowed to be dipped in solder including plastic mold portion.) Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron Peak Temperature (lead part temperature) 350 °C or below Time (each pins) 3 seconds or less Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100°C Data Sheet PN10646EJ04V0DS 10 PS9117A
(4) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly bet ween the photocoupler’s i nput and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high te mperature and high humidity. Data Sheet PN10646EJ04V0DS 11 PS9117A
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Speck Unit for rated line voltages ≤ 300 Vr.m.s. for rated line voltages ≤ 600 Vr.m.s. IV III Climatic test class (DIN EN 60664-1 VDE0110) 40/85/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) U pr = 1.5 × UIORM, Pd < 5 pC UIORM Upr 707 1 061 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 × UIORM, Pd < 5 pC Upr 1 326 V peak Highest permissible overvoltage U TR 6 000 V peak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2 Clearance distance >4.2 mm Creepage distance >4.2 mm Comparative tracking index (DIN IEC 112/VDE 0303 Part 1) CTI 175 Material group (DIN EN 60664-1 VDE0110 Part 1) III a Storage temperature range T stg –55 to +125 °C Operating temperature range T A –40 to +85 °C Isolation resistance, minimum value VIO = 500 V dc at TA = 25°C VIO = 500 V dc at TA MAX. at least 100°C Ris MIN. Ris MIN. Ω Ω Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current I F, Psi = 0) Power (output or total power dissipation) Isolation resistance V IO = 500 V dc at TA = Tsi Tsi Isi Psi Ris MIN. 150 200 300 mA mW Ω <R> Data Sheet PN10646EJ04V0DS 12 PS9117A
The information in this document is current as of July, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E 02. 11-1 (1) (2) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard": "Special": "Specific": Data Sheet PN10646EJ04V0DS 13 PS9117A
Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. Do not burn, destroy, cut, crush, or chemically dissolve the product. Do not lick the product or in any way allow it to enter the mouth. PS9117A