PS9113_V01 RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
R08DS0124EJ0301 Rev.3.01 Page 1 of 15 Oct 29, 2018 Data Sheet PS9113
1 Mbps, OPEN COLLECTOR OUTPUT
HIGH CMR, INTELLIGENT POWER MODULE DRIVE 5-PIN SOP (SO-5) PHOTOCOUPLER
DESCRIPTION
The PS9113 is an optically coupled isolator containing an AlGaAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9113 is specified high CMR, high CTR and pulse width distortion with operating temperature. It is suitable for IPM drive.
FEATURES
High instantaneous common mode rejection voltage (CMH, CML = ±15 kV/µs MIN.) Small package (SO-5) High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.) Propagation Delay Difference (tPLH – tPHL = 270 ns TYP.) Pulse width distortion (|tPHL – tPLH| = 270 ns TYP.) High isolation voltage (BV = 3 750 Vr.m.s.) Open collector output Ordering number of taping product: PS9113-F3: 2 500 pcs/reel Pb-Free product Safety standards UL approved: UL1577, Single protection CSA approved: CAN/CSA-C22.2 No. 62368-1, Basic insulation VDE approved: DIN EN 60747-5-5 (Option)
APPLICATIONS
IPM Driver General purpose inverter Start of mass production Jan.2003 R08DS0124EJ0301 Rev.3.01 Oct 29, 2018
R08DS0124EJ0301 Rev.3.01 Page 2 of 15 Oct 29, 2018 PACKAGE DIMENSIONS (UNIT: mm) Weight: 0.08g (typ.) PHOTOCOUPLER CONSTRUCTION Parameter PS9113 Air Distance (MIN.) 4.2 mm Creepage Distance (MIN.) 4.2 mm Isolation Distance (MIN.) 0.2 mm
R08DS0124EJ0301 Rev.3.01 Page 3 of 15 Oct 29, 2018 FUNCTIONAL DIAGRAM MARKING EXAMPLE 54312LEDOutputON LOFFHShield No. 1 pin MarkInitial of Renesas(Engraved mark)Rank CodeYear Assembled(Last 1 Digit)Week AssembledN9319113N931R*1*1 Bar : Pb-FreeType NumberAssembly LotNi/Pd/Au PLATING
R08DS0124EJ0301 Rev.3.01 Page 4 of 15 Oct 29, 2018
ORDERING INFORMATION
Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number*1 PS9113 PS9113-AX Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS9113 PS9113-F3 PS9113-F3-AX (Ni/Pd/Au) Embossed Tape 2500 pcs/reel (UL, CSA approved) PS9113-V PS9113-V-AX 20 pcs (Tape 20 pcs cut) UL, CSA, PS9113-V-F3 PS9113-V-F3-AX Embossed Tape 2 500 pcs/reel DIN EN 60747-5-5 approved Notes*: 1. For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current*1 I F 25 mA Reverse Voltage V R 5 V Detector Supply Voltage V CC 0.5 to +25 V Output Voltage V O 0.5 to +25 V Output Current I O 15 mA Power Dissipation *2 P C 100 mW Isolation Voltage*3 BV 3 750 Vr.m.s. Operating Ambient Temperature T A 40 to +100 C Storage Temperature T stg 55 to +125 C Notes*: 1. Reduced to 0.33 mA/°C at TA = 70°C or more. 2. Reduced to 1.9 mW/°C at TA = 70°C or more. 3. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-5 shorted together.
R08DS0124EJ0301 Rev.3.01 Page 5 of 15 Oct 29, 2018 RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. TYP. MAX. Unit High Level Input Current I FH 10 20 mA Output Voltage V O 0 20 V Supply Voltage V CC 4.5 15 20 V LED Off Voltage V F 0 0.8 V ELECTRICAL CHARACTERISTICS (TA = –40 to +100°C, VCC = 15 V, unless otherwise specified) Parameter Symbol Conditions MIN. TYP.*1 MAX. Unit Diode Forward Voltage V F I F = 10 mA 1.3 1.65 2.1 V Reverse Current I R V R = 3 V 200 A Terminal Capacitance C t V = 0 V, f = 1 MHz, TA = 25C 30 pF Detector Low Level Output Voltage VOL I F = 10 mA, IOL = 2.4 mA 0.13 0.6 V High Level Output Current IOH V CC = VO = 20 V, VF = 0.8 V 0.01 50 A High Level Supply Current ICCH V CC = 20 V, VF = 0.8 V, VO = open 1.0 1.3 mA Low Level Supply Current ICCL V CC = 20 V, IF = 10 mA, VO = open 1.0 1.3 mA Coupled Threshold Input Current (H L) IFHL VO = 0.8 V, IO = 0.75 mA 1.5 5.0 mA Current Transfer Ratio (IC/IF) CTR IF = 10 mA, VO = 0.6 V 44 110 % Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60%, TA = 25C 1011 Isolation Capacitance C I-O V = 0 V, f = 1 MHz, TA = 25C 0.6 pF Propagation Delay Time (H L)*2 tPHL IF = 10 mA, RL = 20 k, CL = 100 pF, 250 500 ns Propagation Delay Time (L H)*2 tPLH VTHHL = 1.5 V, VTHLH = 2.0 V 520 750 Propagation Delay Difference Between Any 2 Parts tPLHtPHL 200 270 650 Pulse Width Distortion (PWD)*2 tPHL-tPLH 270 650 Common Mode Transient Immunity at High Level Output*3 CMH TA = 25C, IF = 0 mA, VO > 3.0 V, VCM = 1.5 kV, RL = 20 k, CL = 100 pF 15 kV/ s Common Mode Transient Immunity at Low Level Output*3 CML TA = 25C, IF = 10 mA, VO < 1.0 V, VCM = 1.5 kV, RL = 20 k, CL = 100 pF －15 kV/ s
R08DS0124EJ0301 Rev.3.01 Page 6 of 15 Oct 29, 2018 Notes*: 1. Typical values at TA = 25°C. 2. Test circuit for propagation delay time 3. Test circuit for common mode transient immunity USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 µF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. 4. Do not use adhesives or coating materials including halogens to fix this device. CL includes probe and stray wiring capacitance.Pulse input (IF = 10 mA)47(PW = 10 s, Duty cycle = 1/10)RL = 20 kVO (Monitor)VCC = 15 VInput(Monitor)0.1 FCL = 100 pFInputOutputVTHHL = 1.5 VVTHLH = 2.0 V15 VVOLtPHLtPLHIF (ON)50% IF (ON)
R08DS0124EJ0301 Rev.3.01 Page 7 of 15 Oct 29, 2018 TYPICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Remark The graphs indicate nominal characteristics. Ambient Temperature TA (°C)Ambient Temperature TA (°C)Ambient Temperature TA (°C)Forward Current IF (mA)Forward Current IF (mA) High Level Supply Current ICCH (µA)Low Level Supply Current ICCL (µA)Low Level Output Voltage VOL (V)Output Current (Relative Value)Propagation Delay Time tPHL, tPLH (ns)Propagation Delay Difference tPHL-tPLH (ns)Output Current Io (mA) Vcc = 20 VVo = OpenICCH : VF = 0.8 VICCL : IF = 10 mAVcc = 15 VVo = 0.8 VIo = 0.75 mAVcc = 15 VIF = 10 mAIo = 2.4 mA Vcc = 15 VCL= 100 pFRL = 20 KΩIF = 10 mAVo = 0.6 VVo = 0.6 V100 °CTa = –40°C25 °CtPLHtPLH-tPHLtPHL
R08DS0124EJ0301 Rev.3.01 Page 8 of 15 Oct 29, 2018 Remark The graphs indicate nominal characteristics. IF = 10 mACL = 100 pFRL = 20 KΩIF = 10 mAVcc = 15 VCL = 100 pFRL = 20 KΩtPLHtPLHtPLH-tPHLtPHLtPHLPWDAmbient Temperature TA (°C)Supply Voltage Vcc (V)Load Capacitance CL(pF)Load Resistance RL (KΩ)Load Resistance RL(KΩ)020040060080010001200140016000 100 200 300 400 500IF = 10 mAVcc = 15 VRL= 20 KΩtPLHtPHL 01002003004005000 5 10 15 20 25IF= 10 mAVcc = 5 VCL = 15 pFtPLHtPLH-tPHLtPHL020040060080010000 10 20 30 40 50IF = 10 mAVcc = 15 VCL = 100 pFtPLHtPLH-tPHLtPHL
R08DS0124EJ0301 Rev.3.01 Page 9 of 15 Oct 29, 2018 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape)Tape Direction 5pin SOP
R08DS0124EJ0301 Rev.3.01 Page 10 of 15 Oct 29, 2018 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 【5pin SOP】
R08DS0124EJ0301 Rev.3.01 Page 11 of 15 Oct 29, 2018 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering
- Peak reflow temperature 260 C or below (package surface temperature)
- Time of peak reflow temperature 10 seconds or less
- Time of temperature higher than 220C 60 seconds or less
- Time to preheat temperature from 120 to 180C 12030 s
- Number of reflows Three
- Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (2) Wave soldering Temperature 260 C or below (molten solder temperature) Time 10 seconds or less Preheating conditions 120C or below (package surface temperature) Number of times One (Allowed to be dipped in solder including plastic mold portion.) Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron Peak Temperature (lead part temperature) 350C or below Time (each pins) 3 seconds or less Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100C (4) Cautions Fluxes Avoid removing the residual flux with freon-based and halogens-based (chlorine-based) cleaning solvent . 220°C Package Surface Temperature T (°C)Time (s) (heating)to 10 sto 60 s260°C MAX.Recommended Temperature Profile of Infrared Reflow 120±30 s(preheating)180°C120°C
R08DS0124EJ0301 Rev.3.01 Page 12 of 15 Oct 29, 2018 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector- emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
R08DS0124EJ0301 Rev.3.01 Page 13 of 15 Oct 29, 2018 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Rating Unit Climatic test class (IEC 60068-1/DIN EN 60068-1) 40/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.6 UIORM, Pd 5 pC UIORM Upr 707 1131 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 UIORM, Pd 5 pC Upr 1 326 V peak Highest permissible overvoltage U IOTM 6 000 V peak Degree of pollution (DIN EN 60664-1 VDE 0110 Part 1) 2 Comparative tracking index ((IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) CTI 175 Material group (DIN EN 60664-1 VDE 0110 Part 1) III a Storage temperature range Tstg –55 to +125 °C Operating temperature range T A –40 to +100 °C Isolation resistance, minimum value VIO = 500 V dc at TA = 25°C VIO = 500 V dc at TA MAX. at least 100°C Ris MIN. Ris MIN. 1012 1011 Ω Ω Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Tsi Isi Psi Ris MIN. 150 200 300 109 mA mW Ω Dependence of maximum safety ratings with package temperature 010020030040050060070080090010000 25 50 75 100 125 150 175 200Package temp Tsi (°C)Total Power Dissipation Psi (mW)Input Current Isi (mA)Psi: Total Power DissipationIsi: Input Current
R08DS0124EJ0301 Rev.3.01 Page 14 of 15 Oct 29, 2018 Method a) Destructive Test, Type and Sample Test Method b) Non-destructive Test, 100% Production Test t1tinit2t3tmt4UIOTM=6000VUpr =1131VUIORM =707VV tt1,t2= 1 to 10 sect3,t4= 1 sectm(PARTIAL DISCHARGE)= 10 secttest = 12 sectini = 60 secttestUpr =1326VUIORM =707Vt3t4Vt3,t4= 0.1 sectm(PARTIAL DISCHARGE)= 1.0 secttest = 1.2 secttestttm
R08DS0124EJ0301 Rev.3.01 Page 15 of 15 Oct 29, 2018 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.
- Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.
- Do not burn, destroy, cut, crush, or chemically dissolve the product.
- Do not lick the product or i any way allow it to enter the mouth. All trademarks and registered trademarks are the property of their respective owners.
http://www.renesas.comSALES OFFICES © 2018 Renesas Electronics Corporation. All rights reserved. Colophon 7.0 (Rev.4.0-1 November 2017) Refer to "http://www.renesas.com/" for the latest and detailed information. California Eastern Laboratories, Inc. 4590 Patrick Henry Drive, Santa Clara, California 95054-1817, U.S.A. Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-651-700, Fax: +44-1628-651-804 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Düsseldorf, Germany Renesas Electronics (China) Co., Ltd. Room 1709 Quantum Plaza, No.27 ZhichunLu, Haidian District, Beijing, 100191 P. R. China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, 200333 P. R. China Tel: +86-21-2226-0888, Fax: +86-21-2226-0999 Renesas Electronics Hong Kong Limited Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2265-6688, Fax: +852 2886-9022 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Renesas Electronics India Pvt. Ltd. No.777C, 100 Feet Road, HAL 2nd Stage, Indiranagar, Bangalore 560 038, India Tel: +91-80-67208700, Fax: +91-80-67208777 Renesas Electronics Korea Co., Ltd. 17F, KAMCO Yangjae Tower, 262, Gangnam-daero, Gangnam-gu, Seoul, 06265 Korea Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation or any other use of the circuits, software, and information in the design of your product or system. Renesas Electronics disclaims any and all liability for any losses and damages incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics hereby expressly disclaims any warranties against and liability for infringement or any other claims involving patents, copyrights, or other intellectual property rights of third parties, by or arising from the use of Renesas Electronics products or technical information described in this document, including but not limited to, the product data, drawings, charts, programs, algorithms, and application examples. 3. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You shall not alter, modify, copy, or reverse engineer any Renesas Electronics product, whether in whole or in part. Renesas Electronics disclaims any and all liability for any losses or damages incurred by you or third parties arising from such alteration, modification, copying or reverse engineering. 5. Renesas Electronics products are classified according to the following two quality grades: “Standard”and “High Quality”. The intended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; industrial robots; etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control (traffic lights); large-scale communication equipment; key financial terminal systems; safety control equipment; etc. Unless expressly designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not intended or authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems; surgical implantations; etc.), or may cause serious property damage (space system; undersea repeaters; nuclear power control systems; aircraft control systems; key plant systems; military equipment; etc.). Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’smanual or other Renesas Electronics document. 6. When using Renesas Electronics products, refer to the latest product information (data sheets, user’smanuals, application notes, “General Notes for Handling and Using Semiconductor Devices” in the reliability handbook, etc.), and ensure that usage conditions are within the ranges specified by Renesas Electronics with respect to maximum ratings, operating power supply voltage range, heat dissipation characteristics, installation, etc. Renesas Electronics disclaims any and all liability for any malfunctions, failure or accident arising out of the use of Renesas Electronics products outside of such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of Renesas Electronics products, semiconductor products have specific characteristics, such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Unless designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not subject to radiation resistance design. You are responsible for implementing safety measures to guard against the possibility of bodily injury, injury or damage caused by fire, and/or danger to the public in the event of a failure or malfunction of Renesas Electronics products, such as safety design for hardware and software, including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult and impractical, you are responsible for evaluating the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. You are responsible for carefully and sufficiently investigating applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive, and using Renesas Electronics products in compliance with all these applicable laws and regulations. Renesas Electronics disclaims any and all liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technologies shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You shall comply with any applicable export control laws and regulations promulgated and administered by the governments of any countries asserting jurisdiction over the parties or transactions. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, or any other party who distributes, disposes of, or otherwise sells or transfers the product to a third party, to notify such third party in advance of the contents and conditions set forth in this document. 11. This document shall not be reprinted, reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its directly or indirectly controlled subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.