PS8101-V-F4-A

PS8101_1 NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. DATA SHEET The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. PHOTOCOUPLER PS8101

1 Mbps HIGH CMR ANALOG OUTPUT TYPE

5-PIN SOP (SO-5) PHOTOCOUPLER Document No. PN10260EJ06V0DS (6th edition) Date Published August 2009 NS Printed in Japan −NEPOC Series− 2003, 2009

DESCRIPTION

The PS8101 is an optically coupled isolat or containing a GaAlAs LED on the light emitting diode (input side) and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip. This is a plastic SOP (Small Out-line Package) type for high density applications.

FEATURES

• High common mode transient immunity (C MH, CML = ±15 kV/μs MIN.)  Small package (SO-5)  High supply voltage (V CC = 35 V)  High isolation voltage (BV = 3 750 Vr.m.s.)  High-speed response (t PHL = 0.8 μs MAX., tPLH = 1.2 μs MAX.)  Ordering number of taping produc t: PS8101-F3, F4: 2 500 pcs/reel  Pb-Free product  Safety standards  UL approved: File No. E72422  CSA approved: No. CA 101391 (C A5A, CAN/CSA-C22.2 60065, 60950)  DIN EN60747-5-2 (VDE0884 Part 2) approved: No. 40008902 (Option)

APPLICATIONS

 Computer and peripheral manufactures  General purpose inverter  Substitutions for relays and pulse transformers  Power supply PIN CONNECTION (Top View) 1. Anode 2. Cathode 3. GND 4. V O 5. VCC <R> <R>

Data Sheet PN10260EJ06V0DS 2 PS8101 PACKAGE DIMENSIONS (UNIT: mm) 1.27 0.4+0.10 –0.05 0.25 M 0.1±0.1 2.6±0.2 4.4 7.0±0.3 0.5±0.3 0.15+0.10 –0.05 3.4 +0.3 –0.153 MARKING EXAMPLE No. 1 pin Mark Initial of NEC (Engraved mark) Rank Code Year Assembled (Last 1 Digit) Week Assembled N 9 31 8101 N931 N *1 *1 Bar : Pb-Free Type Number Assembly Lot No. 1 pin Mark Initial of NEC (Engraved mark) Rank Code Year Assembled (Last 1 Digit) Week Assembled N 9 31 8101 N931 N *1 *1 Bar : Pb-Free Type Number Assembly Lot SnBi PLATING Ni/Pd/Au PLATING PHOTOCOUPLER CONSTRUCTION Parameter PS8101 Air Distance (MIN.) 4.2 mm Outer Creepage Distance (MIN.) 4.2 mm Isolation Distance (MIN.) 0.2 mm <R> <R> <R>

Data Sheet PN10260EJ06V0DS 3 PS8101

ORDERING INFORMATION

Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number PS8101 PS8101-A Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS8101 PS8101-F3 PS8101-F3-A (SnBi) Embossed T ape 2 500 pcs/reel (UL, CSA approved) PS8101-F4 PS8101-F4-A PS8101-V PS8101-V-A 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS8101-V-F3 PS8101-V-F3-A Embossed Tape 2 500 pcs/reel (VDE0884 Part2) PS8101-V-F4 PS8101-V-F4-A Approved (Option) PS8101 PS8101-AX Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS8101-F3 PS8101-F3-AX (Ni/Pd/Au) Embossed Tape 2 500 pcs/reel (UL, CSA approved) PS8101-F4 PS8101-F4-AX PS8101-V PS8101-V-AX 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS8101-V-F3 PS8101-V-F3-AX Embossed T ape 2 500 pcs/reel (VDE0884 Part2) PS8101-V-F4 PS8101-V-F4-AX Approved (Option) *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current I F 25 mA Reverse Voltage V R 5.0 V Power Dissipation P D 45 mW Detector Supply Voltage V CC 35 V Output Voltage V O 35 V Output Current I O 8.0 mA Power Dissipation P C 100 mW Isolation Voltage BV 3 750 Vr.m.s. Operating Ambient Temperature T A –55 to +100 °C Storage Temperature T stg –55 to +125 °C *1 Reduced to 0.45 mW/°C at TA = 25°C or more. *2 Reduced to 1.00 mW/°C at TA = 25°C or more. *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-5 shorted together. <R>

Data Sheet PN10260EJ06V0DS 4 PS8101 ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F I F = 16 mA 1.7 2.2 V Reverse Current I R V R = 3 V 10 μA Forward Voltage Temperature Coefficient ΔVF/ΔTA I F = 16 mA −2.1 mV/ °C Terminal Capacitance C t V = 0 V, f = 1 MHz 30 pF Detector High Level Output Current I OH (1) I F = 0 mA, VCC = VO = 5.5 V 3 500 nA High Level Output Current I OH (2) I F = 0 mA, VCC = VO = 30 V 100 μA Low Level Output Voltage V OL I F = 16 mA, VCC = 4.5 V, IO = 1.2 mA 0.1 0.4 V Low Level Supply Current I CCL I F = 16 mA, VO = open, VCC = 30 V 50 μA High Level Supply Current I CCH I F = 0 mA, VO = open, VCC = 30 V 0.01 2 Coupled Current Transfer Ratio CTR I F = 16 mA, VCC = 4.5 V, VO = 0.4 V 15 20 35 % Isolation Resistance R I-O V I-O = 1 kVDC, RH = 40 to 60% 10 Ω Isolation Capacitance C I-O V = 0 V, f = 1 MHz 0.4 pF Propagation Delay Time (H → L) tPHL IF = 16 mA, VCC = 5 V, RL = 2.2 kΩ, CL = 15 pF 0.5 0.8 μs Propagation Delay Time (L → H) tPLH 0.6 1.2 Common Mode Transient Immunity at High Level Output CMH IF = 0 mA, VCC = 5 V, RL = 4.1 kΩ, VCM = 1.5 kV 15 kV/ μs Common Mode Transient Immunity at Low Level Output CML IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ, VCM = 1.5 kV −15 *1 CTR rank K : 20 to 35 (%) N : 15 to 35 (%) <R> <R>

Data Sheet PN10260EJ06V0DS 5 PS8101 *2 Test circuit for propagation delay time Pulse input 47 Ω (Pulse width = 100 s, Duty cycle = 1/10) μ RL = 2.2 kΩ VO (Monitor) VCC = 5 V Input (Monitor) 0.1 Fμ CL = 15 pF Input Output 50% 1.5 V 5 V VOL tPHL tPLH C L is approximately 15 pF which includes probe and stray wiring capacitance. *3 Test circuit for common mode transient immunity IF RL = 4.1 kΩ VO (Monitor) VCC = 5 V 0.1 Fμ VCM 90% 10% 1.5 kV 0 V 5 V 2 V 0.8 V VOL VCM VO (IF = 0 mA) VO (IF = 16 mA) tr tf USAGE CAUTIONS 1. This product is weak for static el ectricity by designed with hi gh-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high te mperature and high humidity.

Data Sheet PN10260EJ06V0DS 6 PS8101 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) 25 50 75 100 Ambient Temperature TA (°C) Diode Power Dissipation PD (mW) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE 120 100 25 50 75 100 Ambient Temperature TA (°C) Detector Power Dissipation PC (mW) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 100 0.01 0.1 Forward Voltage VF (V) Forward Current IF (mA) FORWARD CURRENT vs. FORWARD VOLTAGE TA = +100°C +50°C +25°C 0°C –25°C 1 000 0.1 100 50 100–25 0 25 75 Ambient Temperature TA (°C) High Level Output Current IOH (nA) HIGH LEVEL OUTPUT CURRENT vs. AMBIENT TEMPERATURE VCC = VO = 30 V VCC = VO = 5.5 V IF = 0 mA 0.5 5 10 501 Forward Current IF (mA) CURRENT TRANSFER RATIO vs. FORWARD CURRENT Current Transfer Ratio CTR (%) VCC = 4.5 V, VO = 0.4 V 1.6 0.0 1.2 0.4 1.4 1.0 0.8 0.6 0.2 0 50 100–50 –25 25 75 Ambient Temperature TA (°C) Normalized Current Transfer Raio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized to 1.0 at TA = 25°C, IF = 16 mA, VCC = 4.5 V, VO = 0.4 V Remark The graphs indicate nominal characteristics.

Data Sheet PN10260EJ06V0DS 7 PS8101 4 8 18 20 162 6 10 12 14 Output Voltage VO (V) Output Current IO (mA) OUTPUT CURRENT vs. OUTPUT VOLTAGE 20 mA 15 mA 10 mA 5 mA IF = 25 mA 12 16 204826 10 14 18 Forward Current IF (mA) Output Voltage VO (V) OUTPUT VOLTAGE vs. FORWARD CURRENT RL = 2.2 kΩ 5.6 kΩ 3.0 1.0 2.0 10 15 255 20 Forward Current IF (mA) PROPAGATION DELAY TIME vs. FORWARD CURRENT Propagation Delay Time tPHL, tPLH ( s)μ VCC = 5 V, RL = 2.2 kΩ tPHL tPLH 0.1 10 k 100 k1 k Load Resistance RL (Ω) PROPAGATION DELAY TIME vs. LOAD RESISTANCE Propagation Delay Time tPHL, tPLH ( s)μ VCC = 5 V, IF = 16 mA tPLH tPHL –50 0 50 100–25 7525 Ambient Temperature TA (°C) NORMALIZED PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURENormalized Propagation Delay Time tPHL, tPLH Normalized to 1.0 at TA = 25°C, IF = 16 mA, VCC = 5 V, RL = 2.2 kΩ tPLH tPHL Remark The graphs indicate nominal characteristics.

Data Sheet PN10260EJ06V0DS 8 PS8101 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) Taping Direction Outline and Dimensions (Reel) Packing: 2 500 pcs/reel 2.0±0.5 R 1.0 13.0±0.2φ 21.0±0.8φ 330±2.0φ 100±1.0φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 13.0±0.2φ PS8101-F3 PS8101-F4 1.55±0.1 2.0±0.05 4.0±0.1 1.75±0.1 3.9±0.1 3.45 MAX. 7.4±0.1 0.3±0.058.0±0.1 1.5+0.1 5.5±0.1 12.0±0.2 3.0±0.1

Data Sheet PN10260EJ06V0DS 9 PS8101 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 1.45 0.81.27 5.5

Data Sheet PN10260EJ06V0DS 10 PS8101 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering  Peak reflow temperature 260 °C or below (package surface temperature)  Time of peak reflow temperature 10 seconds or less  Time of temperature higher than 220°C 60 seconds or less  Time to preheat temperature from 120 to 180°C 120 ±30 s  Number of reflows Three  Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 120±30 s (preheating) 220°C 180°C Package Surface Temperature T (°C) Time (s) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s to 60 s 260°C MAX. 120°C (2) Wave soldering  Temperature 260 °C or below (molten solder temperature)  Time 10 seconds or less  Preheating conditions 120 °C or below (package surface temperature)  Number of times One (Allowed to be dipped in solder including plastic mold portion.)  Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron  Peak Temperature (lead part temperature) 350 °C or below  Time (each pins) 3 seconds or less  Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100°C

Data Sheet PN10260EJ06V0DS 11 PS8101 (4) Cautions  Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler ’s input and output or between V CC and GND at startup, t he output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. <R>

Data Sheet PN10260EJ06V0DS 12 PS8101 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Speck Unit Climatic test class (IEC 60068-1/DIN EN 60068-1) 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) U pr = 1.5 × UIORM, Pd < 5 pC UIORM Upr 707 1 061 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 × UIORM, Pd < 5 pC Upr 1 326 V peak Highest permissible overvoltage U TR 6 000 V peak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2 Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) CTI 175 Material group (DIN EN 60664-1 VDE0110 Part 1) III a Storage temperature range T stg –55 to +125 °C Operating temperature range T A –55 to +100 °C Isolation resistance, minimum value VIO = 500 V dc at TA = 25°C VIO = 500 V dc at TA MAX. at least 100°C Ris MIN. Ris MIN. Ω Ω Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current I F, Psi = 0) Power (output or total power dissipation) Isolation resistance V IO = 500 V dc at TA = Tsi Tsi Isi Psi Ris MIN. 150 200 300 mA mW Ω <R>

Data Sheet PN10260EJ06V0DS 13 PS8101 The information in this document is current as of August, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC E lectronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E0904E (1) (2) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard": "Special": "Specific":

Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.  Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.  Do not burn, destroy, cut, crush, or chemically dissolve the product.  Do not lick the product or in any way allow it to enter the mouth.