PS8101 NEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

NEC's HIGH NOISE REDUCTION HIGH SPEED ANALOG OUTPUT

5 PIN SOP OPTOCOUPLER

FEATURES

  • HIGH COMMON MODE TRANSISENT IMMUNITY: CMH,CML: ±10 kV/µs MIN
  • HIGH ISOLATION VOLTAGE: BV: 2500 Vr.m.s.
  • HIGH SUPPLY VOLTAGE: VCC = 35 V
  • HIGH SPEED RESPONSE: tPHL = 0.8 µs MAX, tPLH = 1.2 µs MAX
  • AVAILABLE IN TAPE AND REEL: PS8101-F3, F4

DESCRIPTION

NEC's PS8101 is an optically coupled isolator containing a GaAIAs LED on the light emitting diode (input) side and a PIN photodiode and a high speed amplifier transistor on the output side on one chip. Its small package makes it ideal for high density circuits and applications.

APPLICATIONS

  • COMPUTERS AND PERIPHERALS MANUFACTURES
  • GENERAL PURPOSE INVERTER
  • POWER SUPPLIES
  • RELAY AND PULSE TRANSFORMER REPLACEMENTS ELECTRICAL CHARACTERISTICS (TA = 25°C) SYMBOLS PARAMETERS UNITS MIN TYP MAX VF Forward Voltage, IF = 16 mA V 1.7 2.2 IR Reverse Current, VR = 3 V µA1 0 ∆VF/∆T Forward Voltage Temp. Coefficient, IF = 16 mA mV/ °C -1.6 Ct Terminal Capacitance, V = 0 V, f = 1.0 MHz pF 60 IOH(1) High Level Output Current nA 3 500 IF = 0 mA, VCC = VO = 5.5 V IOH(2) High Level Output Current µA1 0 0 IF = 0 mA, VCC = VO = 30 V VOL Low Level Output Voltage V 0.1 0.4 IF = 16 mA, VCC = 4.5 V, LO = 1.2 mA ICCL Low Level Supply Current µA5 0 IF = 16 mA, VO = Open, VCC = 30 V ICCH High Level Supply Current µA 0.01 2 IF = 0 mA, VO = Open, VCC = 30 V PART NUMBER PS8101 Diode Detector CTR Current Transfer Ratio, I F= 16 mA, VCC = 4.5 V, VO = 0.4 V % 15 20 35 RI-O Isolation Resistance, V IN-OUT = 1k VDC, RH = 40 to 60 % Ω 1011 CI-O Isolation Capacitance, V = 0, f = 1.0 MHz pF 0.4 tPHL Propagation Delay Time, (High → Low)1 µs 0.5 0.8 IF = 16 mA, VCC = 5 V, RL = 2.2 k Ω, CL = 15 pF tPLH Propagation Delay Time, (Low → High)1 µs 0.6 1.2 IF= 16 mA, VCC = 5 V, RL = 2.2 k Ω, CL = 15 pF CMH Common Mode Transient Immunity at High Level Output2 kV/µs1 0 IF= 0 mA, VCC = 5 V, RL = 4.1 k Ω, VCM = 1.5 kV CML Common Mode Transient Immunity at Low Level Output 2 kV/µs -10 IF= 16 mA, VCC = 5 V, RL = 4.1 k Ω, VCM = 1.5 kV Coupled CON'T ON NEXT PAGE. California Eastern Laboratories ESD SENSITIVE NOTES: 1. CTR rank K: 20 to 35 (%) N: 10 to 35 (%) PRELIMINARY DATA SHEET

SYMBOLS PARAMETERS UNITS RATING Diode IF Forward Current mA 25 VR Reverse Voltage V 5.0 PD Power Dissipation mW 45 Detector VCC Supply Voltage V 35 VO Output Voltage V 35 IO Output Current mA 8.0 PC Power Dissipation mW 100 Coupled BV Isolation Voltage 2 Vr.m.s. 2500 TA Operating Ambient Temp. °C -55 to +100 TSTG Storage Temperature °C -55 to +125 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for one minute at T A = 25°C, RH = 60% between input and output. 3. Test Circuit forCommon Mode Transient Immunity: NOTES: 2. Test Circuit for Propagation Delay Time: *CL is approximately 15 pF which includes probe and stray wiring capacitance. Usage Cautions: 1. When handling this product, precautions should be taken against static electricity. 2. A by-pass capacitor of ≥ 0.1 µF is used between V CC and GND. (Continued from previous page) Pulse input (IF) (Pulse width = 100 µs Duty Cycle = 1/10) 47 Ω Input (monitor) VO (monitor) VCC = 5 V RL = 2.2 kΩ CL = 15 pF 0.1 µF Input 50% 5 V 1.5 V Output tPHL tPLH VOL VO (monitor) VCC = 5 V RL = 4.1 kΩ 0.1 µF VCM IF VCM 90 % tr tf (IF = 0 mA) (IF = 16 mA) V0LV0 10 % 0 V 5 V 0.8 V 2 V 1.5 kV PART PACKAGE PACKAGE APPLIICATION NUMBER STYLE PART NUMBER* PS8101 5-pin SOP Magazine case PS8101

100 PCS

ORDERING INFORMATION

  • For the application of the Safety Standard, following part number should be used.

(Top View) OUTLINE DIMENSIONS (Units in mm) 1. Anode 2. Cathode 3. GND 4. V O 5. VCC 3.4+0.3 -0.1 2.6 ±0.2 0.1 ±0.1 0.25 1.27 0.4 +0.10 -0.05 M 7.0±0.3 4.4 0.5±0.3 0.15 +0.10 -0.05 PS8101 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. MARKING No. 1 pin Mark Initial of NEC (Engraved mark) 8101 N234 Rank Code Year Assembled (Last 1 Digit) Week Assembled N 2 34 Assembly Lot N A Business Partner of NEC Compound Semiconductor Devices, Ltd. 12/22/2004