PS7801M-1A NEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
2007, 2009 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET PIN CONNECTION (Top View) The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
DESCRIPTION
The PS7801M-1A is a low output capac itance solid state relay containing a GaAs LED on the light emitting side (input side) and MOS FETs on the output side. An ultra small flat-lead package has been provided whic h realizes a reduction in mounting area of about 50% compared with the PS72xx series. It is suitable for high-frequency signal control, due to its low C × R (3.4 pF • Ω), low output capacitance, and low off- state leakage current.
FEATURES
Ultra small flat-lead package (4.2 (L) × 2.5 (W) × 1.85 (H) mm) Low C × R (C × R = 3.4 pF Ω) Low output capacitance (C out = 0.95 pF TYP.) 1 channel type (1 a output) Designed for AC/DC switching line changer Low offset voltage Ordering number of taping product: PS7801M-1A-F3: 3 500 pcs/reel Pb-Free product Safety standards UL approved: No. E72422
APPLICATIONS
Measurement equipment <R> DATA SHEET The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. 4-PIN ULTRA SMALL FLAT-LEAD, LOW C × R (3.4 pF • Ω) 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7801M-1A Document No. PN10691EJ03V0DS (3rd edition) Date Published May 2009 NS Printed in Japan −NEPOC Series−
PACKAGE DIMENSIONS (UNIT: mm) 3.6 +0.3 –0.4 2.5±0.3 4 3 N 4.2±0.2 0.2 MAX. 0.2±0.1 3.0 MAX. 1.27 1.85±0.05 0.4±0.1 0.15+0.1 –0.05 0.2±0.1 0.36 4.6±0.2 MARKING EXAMPLE 901 N Assembly lot Week assembled Year assembled No.1 pin mark (Nicked corner) An initial of "NEC" (Marking details) Last number of type No. : 1M *1 The marking corresponds to the last two digits of the part number below. PS7801M-1A *2 Bar : Pb-Free <R> Data Sheet PN10691EJ03V0DS 2 PS7801M-1A
ORDERING INFORMATION
Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number PS7801M-1A PS7801M-1A-A Pb-Free 50 pcs (Tape 50 pcs cut) Standard products PS7801M-1A PS7801M-1A-F3 PS7801M-1A-F3-A Embossed Tape 3 500 pcs/reel (UL approved) *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current (DC) I F 50 mA Reverse Voltage V R 5.0 V Power Dissipation P D 50 mW Peak Forward Current I FP 1 A MOS FET Break Down Voltage V L 20 V Continuous Load Current I L 160 mA Pulse Load Current (AC/DC Connection) ILP 240 mA Power Dissipation P D 250 mW Isolation Voltage BV 500 Vr.m.s. Total Power Dissipation P T 300 mW Operating Ambient Temperature T A −40 to +85 °C Storage Temperature T stg −40 to +100 °C *1 PW = 100 μs, Duty Cycle = 1% *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at T A = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current I F 4.5 5 20 mA LED Off Current I F 0.1 mA <R> Data Sheet PN10691EJ03V0DS 3 PS7801M-1A
ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F I F = 5 mA 1.1 1.4 V Reverse Current I R V R = 5 V 5.0 μA MOS FET Off-state Leakage Current I Loff V D = 20 V 0.03 0.25 nA Output Capacitance C out V D = 0 V, f = 1 MHz, t ≤ 1 s 0.95 1.5 pF Coupled LED On-state Current I Fon I L = 160 mA 4 mA On-state Resistance R on I F = 5 mA, IL = 160 mA, t ≤ 10 ms 3.6 5.0 Ω Turn-on Time *1, 2 t on I F = 5 mA, VO = 5 V, RL = 500 Ω, 0.05 0.25 ms Turn-off Time *1, 2 t off PW ≥ 0.5 ms 0.03 0.25 Isolation Resistance R I-O V I-O = 0.5 kVDC 10 Ω Isolation Capacitance C I-O V = 0 V, f = 1 MHz 0.3 pF *1 Test Circuit for Switching Time Pulse Input Input monitor monitor VO VL RL IF Rin ton toff 10% 90% Input Output VO = 5 V 50% *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 0.5 ms. Be aware that when the device operates with an input-pulse width less than 0.5 ms, the turn-on time and turn-off time will increase. Data Sheet PN10691EJ03V0DS 4 PS7801M-1A
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) –25 0 25 50 75 85 100 100 –25 0 25 50 75 85 100 200 160 120 Ambient Temperature T A (°C) Maximum Forward Current IF (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE Applied Voltage VD (V) Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 02 0 40 60 80 100 10–8 10–9 10–10 10–11 10–12 10–13 10–14 VD = 20 V Ambient Temperature TA (°C) Off-state Leakage Current ILoff (A) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE LOAD CURRENT vs. LOAD VOLTAGE Load Voltage VL (V) Load Current IL (mA) Ambient Temperature TA (°C) Maximum Load Current IL (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 1 mA 5 mA 20 mA 30 mA IF = 50 mA 10 mA –25 0 25 50 75 100 1.6 1.4 1.2 1.0 0.8 Ambient Temperature TA (°C) Forward Voltage VF (V) AMBIENT TEMPERATURE FORWARD VOLTAGE vs. f = 1 MHz, t ≤ 1 s 5 10 15 20 25 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 IF = 5 mA 200 150 100 –50 –100 –150 –200 Remark The graphs indicate nominal characteristics. <R> Data Sheet PN10691EJ03V0DS 5 PS7801M-1A
–25 0 25 50 75 100 2.0 1.6 1.2 0.8 0.4 Normalized to 1.0 at T A = 25°C, IF = 5 mA, IL = 160 mA Ambient Temperature TA (°C) Normalized On-state Resistance Ron NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE n = 50 pcs, IF = 5 mA, IL = 160 mA ON-STATE RESISTANCE DISTRIBUTION Number (pcs) On-state Resistance Ron (Ω) TURN-ON TIME vs. FORWARD CURRENT Forward Current IF (mA) Turn-on Time ton (ms) TURN-OFF TIME vs. FORWARD CURRENT Forward Current IF (mA) Turn-off Time toff (ms) Turn-on Time ton (ms) Number (pcs) TURN-ON TIME DISTRIBUTION n = 50 pcs, IF = 5 mA, VO = 5 V, RL = 500 Ω, PW = 0.5 ms Turn-off Time toff (ms) Number (pcs) TURN-OFF TIME DISTRIBUTION 5 15 20 2510 0.60 0.50 0.40 0.30 0.20 0.10 VO = 5 V, RL = 500 Ω, PW = 0.5 ms 5 15 20 2510 0.5 0.4 0.3 0.2 0.1 VO = 5 V, RL = 500 Ω, PW = 0.5 ms n = 50 pcs, I F = 5 mA, VO = 5 V, RL = 500 Ω, PW = 0.5 ms 0.02 0.04 0.01 0.03 0.05 0.06 Remark The graphs indicate nominal characteristics. Data Sheet PN10691EJ03V0DS 6 PS7801M-1A
Ambient Temperature TA (°C) Normalized Turn-on Time ton NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE Ambient Temperature TA (°C) Normalized Turn-off Time toff NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE –25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Normalized to 1.0 at TA = 25°C, IF = 5 mA, VO = 5 V, RL = 500 Ω, PW = 0.5 ms –25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Normalized to 1.0 at TA = 25°C, IF = 5 mA, VO = 5 V, RL = 500 Ω, PW = 0.5 ms Remark The graphs indicate nominal characteristics. Data Sheet PN10691EJ03V0DS 7 PS7801M-1A
TAPING SPECIFICATIONS (UNIT: mm) Tape Direction PS7801M-1A-F3 Outline and Dimensions (Tape) Outline and Dimensions (Reel) 1.55±0.05 4.0±0.1 2.0±0.05 4.0±0.1 1.75±0.1 2.9 MAX. 0.3 2.9±0.1 2.4±0.1 1.5+0.1 5.3±0.1 5.5±0.05 12.0±0.2 NNNN Packing: 3 500 pcs/reel 2.0±0.5 R 1.0 13.0±0.2φ 21.0±0.8φ 330±2.0φ 100±1.0φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 13.0±0.2φ Data Sheet PN10691EJ03V0DS 8 PS7801M-1A
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 3.6 (0.35) 4.4 5.3 1.27 0.8 0.6 24-R0.1 ( ) : Reference value Remark All dimensions in this figure must be evaluated before use. Data Sheet PN10691EJ03V0DS 9 PS7801M-1A
RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering Peak reflow temperature 260 °C or below (package surface temperature) Time of peak reflow temperature 10 seconds or less Time of temperature higher than 220°C 60 seconds or less Time to preheat temperature from 120 to 180°C 120 ±30 s Number of reflows Three Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 220°C Package Surface Temperature T (°C) Time (s) (heating) to 10 s to 60 s 260°C MAX. Recommended Temperature Profile of Infrared Reflow 120±30 s (preheating) 180°C 120°C (2) Wave soldering Temperature 260 °C or below (molten solder temperature) Time 10 seconds or less Preheating conditions 120 °C or below (package surface temperature) Number of times One Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron Peak temperature (lead part temperature) 350 °C or below Time (each pins) 3 seconds or less Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. (4) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet PN10691EJ03V0DS 10 PS7801M-1A
- Protect against static el ectricity when handling. 2. Avoid storage at a high temp erature and high humidity. Data Sheet PN10691EJ03V0DS 11 PS7801M-1A
The information in this document is current as of May, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E0904E (1) (2) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard": "Special": "Specific": Data Sheet PN10691EJ03V0DS 12 PS7801M-1A
Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. Do not burn, destroy, cut, crush, or chemically dissolve the product. Do not lick the product or in any way allow it to enter the mouth. PS7801M-1A