PS7360-1A NEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. © 1996, 1999 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET The mark  shows major revised points.Document No. P11567EJ6V0DS00 (6th edition) Date Published October 1999 NS CP(K) Printed in Japan Solid State Relay OCMOS FET PS7360-1A ,PS7360L-1A

DESCRIPTION

The PS7360-1A and PS7360L-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7360L-1A has a surface mount type lead.

FEATURES

  • High isolation voltage (BV = 3 750 Vr.m.s.)
  • 1 channel type (1 a output)
  • Low LED operating current (I F = 2 mA)
  • Designed for AC/DC switching line changer
  • Small package (6-pin DIP)
  • Low offset voltage
  • PS7360L-1A: Surface mount type
  • UL approved: File No. E72422 (S)
  • BSI approved: No. 8252/8253
  • CSA approved: No. CA 101391

APPLICATIONS

  • Exchange equipment
  • Measurement equipment
  • FA/OA equipment

Data Sheet P11567EJ6V0DS002 PS7360-1A,PS7360L-1A PACKAGE DIMENSIONS (in millimeters) 9.25±0.5 3.5±0.3 4.15±0.33.3±0.3 0.5±0.1 2.541.34±0.1 0.25 M 0 to 15˚ 7.62 6.5±0.5 9.25±0.5 6.5±0.5 0.10+0.10–0.05 0.9±0.25 9.60±0.4 3.5±0.3 1.34±0.1 0.25 M 2.54 PS7360-1A PS7360L-1A 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 123 654 TOP VIEW 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 123 654 TOP VIEW

Data Sheet P11567EJ6V0DS00 3 PS7360-1A,PS7360L-1A

ORDERING INFORMATION

Part Number Package Packing Style Application Part Number PS7360-1A 6-pin DIP Magazine case 50 pcs PS7360-1A PS7360L-1A PS7360L-1A PS7360L-1A-E3 Embossed Tape 1 000 pcs/reel PS7360L-1A-E4 *1 For the application of the Safety Standard, following part number should be used.

Data Sheet P11567EJ6V0DS004 PS7360-1A,PS7360L-1A ABSOLUTE MAXIMUM RATINGS (T A = 25 °°°°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current (DC) I F 50 mA Reverse Voltage V R 5.0 V Power Dissipation P D 50 mW Peak Forward Current IFP 1A MOS FET Break Down Voltage V L 600 V Continuous Connection A I L 90 mA Load Current Connection B 130 Connection C 200 Pulse Load Current (AC/DC Connection) ILP 250 mA Power Dissipation P D 560 mW Isolation Voltage BV 3 750 Vr.m.s. Total Power Dissipation P T 610 mW Operating Ambient Temperature T A −40 to +85 °C Storage Temperature T stg −40 to +125 °C *1 PW = 100 µs, Duty Cycle = 1 % *2 Conditions: IF ≥ 2 mA. The following types of load connections are available. Connection A V L (AC/DC) 1 6 43 IL L Connection B Connection C 1 6 2 5 IL L VL (DC)+ 1 6 2 5 IL IL L VL (DC)+ 1 6 2 5

43 IL L VL (DC)+

*3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output

Data Sheet P11567EJ6V0DS00 5 PS7360-1A,PS7360L-1A RECOMMENDED OPERATING CONDITIONS (T A = 25 °°°°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current I F 21 0 2 0 m A LED Off Voltage V F 00 . 5 V ELECTRICAL CHARACTERISTICS (T A = 25 °°°°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F IF = 10 mA 1.2 1.4 V Reverse Current I R VR = 5 V 5.0 µA MOS FET Off-state Leakage Current ILoff VD = 600 V 0.03 1.0 µA Output Capacitance C out VD = 0 V, f = 1 MHz 110 pF Coupled LED On-state Current I Fon IL = 90 mA 2.0 mA On-state Resistance R on1 IF = 10 mA, IL = 10 mA 41 50 Ω R on2 IF = 10 mA, IL = 90 mA, t ≤ 10 ms 33 45 Turn-on Time ton IF = 10 mA, VO = 5 V, PW ≥ 10 ms 0.6 2.0 ms Turn-off Time toff 0.03 0.2 Isolation Resistance R I-O VI-O = 1.0 kVDC 10 Ω Isolation Capacitance C I-O V = 0 V, f = 1 MHz 1.1 pF *1 Test Circuit for Switching Time VL R L IF R in Pulse Input Input monitor monitor VO ton toff 10 % 90 % VO = 5 V 50 % Output Input

Data Sheet P11567EJ6V0DS006 PS7360-1A,PS7360L-1A TYPICAL CHARACTERISTICS (T A = 25 °C, unless otherwise specified) 100807550250–25 100 Ambient Temperature TA (˚C) Maximum Forward Current IF (mA) AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. Ambient Temperature TA (˚C) Maximum Load Current IL (mA) AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1007550250–25 1.4 1.6 0.8 1.2 1.0 Ambient Temperature TA (˚C) Forward Voltage VF (V) AMBIENT TEMPERATURE FORWARD VOLTAGE vs. f = 1 MHz 12010080604020 150 200 250 100 Applied Voltage VD (V) Output Capacitance Cout (pF) APPLIED VOLTAGE OUTPUT CAPACITANCE vs. Off-state Leakage Current ILoff (A) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE IF = 10 mA Load Current IL (mA) Load Voltage VL (V) LOAD CURRENT vs. LOAD VOLTAGE –2.0 2.0–4.0 4.00 150 100 –50 –150 –100 100857550250–25 100 125 150 6005003001000 200 400 10–3 10–4 10–5 10–6 10–7 10–8 10–9 TA = 80 ˚C 25 ˚C

Data Sheet P11567EJ6V0DS00 7 PS7360-1A,PS7360L-1A 0.5 0.6 Number (pcs) Turn-on Time ton (ms) TURN-ON TIME DISTRIBUTION n = 50 pcs, IF = 10 mA, VO = 5 V n = 50 pcs, I F = 10 mA, VO = 5 V 0.03 0.050 Number (pcs) Turn-off Time toff (ms) TURN-OFF TIME DISTRIBUTION Turn-on Time ton (ms) Forward Current IF (mA) TURN-ON TIME vs. FORWARD CURRENT Turn-off Time toff (ms) Forward Current IF (mA) TURN-OFF TIME vs. FORWARD CURRENT Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, IL = 10 mA 1007550250–25 0.5 1.5 2.5 3.0 1.0 0.0 2.0 Ambient Temperature TA (˚C) Normalized On-state Resistance Ron AMBIENT TEMPERATURE NORMALIZED ON-STATE RESISTANCE vs. n = 50 pcs, IF = 10 mA, IL = 10 mA 4140 On-state Resistance Ron (Ω ) Number (pcs) ON-STATE RESISTANCE DISTRIBTION 3020100 0.2 0.3 0.5 0.4 0.1 VO = 5 V 302010 2.0 4.0 6.0 8.0 VO = 5 V

Data Sheet P11567EJ6V0DS008 PS7360-1A,PS7360L-1A Normalized Turn-on Time ton Ambient Temperature TA (˚C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 1000–25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V Normalized Turn-off Time toff Ambient Temperature TA (˚C) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 1000–25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V Remark The graphs indicate nominal characteristics.

Data Sheet P11567EJ6V0DS00 9 PS7360-1A,PS7360L-1A TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.1 4.3±0.2 10.3±0.1 0.3 7.5±0.1 16.0±0.3 10.4±0.1 12.0±0.1 Outline and Dimensions (Reel) Packing: 1 000 pcs/reel 2.0±0.5 R 1.0 13.0±0.5φ 21.0±0.8φ Tape Direction PS7360L-1A-E3 PS7360L-1A-E4 330 80.0±5.0 16.4+2.0–0.0 1.5 φ φ

Data Sheet P11567EJ6V0DS0010 PS7360-1A,PS7360L-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

  • Peak reflow temperature 235 °C (package surface temperature)
  • Time of temperature higher than 210 °C 30 seconds or less
  • Number of reflows One
  • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) 60 to 120 s (preheating) 210 ˚C 100 to 160 ˚C Package Surface Temperature T (˚C) Time (s) (heating) to 10 s to 30 s 235 ˚C (peak temperature) Recommended Temperature Profile of Infrared Reflow (2) Dip soldering
  • Temperature 260 °C or below (molten solder temperature)
  • Time 10 seconds or less
  • Number of times One
  • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions
  • F l u x e s Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
  • Products in dry pack After opening the dry pack, solder the products within the valid storage period specified on the label on the dry pack.

Data Sheet P11567EJ6V0DS00 11 PS7360-1A,PS7360L-1A [MEMO]

PS7360-1A,PS7360L-1A CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal.• The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.

  • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.
  • NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
  • Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information.
  • While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features.
  • NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8