PS7206-1A_15 RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.
- All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipmen t; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. DATA SHEET The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. 4-PIN SOP, 0.6 Ω LOW ON-STATE RESISTANCE 600 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7206-1A Document No. PN10297EJ03V0DS (3rd edition) Date Published February 2009 NS Printed in Japan −NEPOC Series− 1999, 2009 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET PIN CONNECTION (Top View)
DESCRIPTION
The PS7206-1A is a low on-state resistance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance.
FEATURES
- Low on-state resistance (R on = 0.6 Ω TYP.) Large continuous load current (I L = 600 mA) 1 channel type (1 a output) Designed for AC/DC switching line changer Small and thin package (4-pin SOP, Height = 2.1 mm) High isolation voltage (BV = 1 500 Vr.m.s.) Low offset voltage Ordering number of taping product : PS7206-1A-E3, E4: 900 pcs/reel : PS7206-1A-F3, F4: 3 500 pcs/reel Pb-Free product Safety standards UL approved: No. E72422 BSI approved: No. 8241, 8242
APPLICATIONS
Measurement equipment FA equipment
Data Sheet PN10297EJ03V0DS 2 PS7206-1A PACKAGE DIMENSIONS (UNIT: mm) 4.4 7.0±0.3 0.5±0.3 0.15+0.10 –0.05 2.54 4.0±0.5 0.05+0.08 –0.05 2.05+0.08 –0.05 0.40+0.10 –0.05 0.25 M MARKING EXAMPLE (LASER MARKING) No.1 pin Mark Assembly Lot Type Number PS7206-1A *1 Bar : Pb-Free Remark Applicable type numbers are underlined below N90 1 Week Assembled Year Assembled (Last 1 Digit) Rank Code 06-A N901 <R>
Data Sheet PN10297EJ03V0DS 3 PS7206-1A
ORDERING INFORMATION
Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number PS7206-1A PS7206-1A-A Pb-Free Magazine case 100 pcs Standard products PS7206-1A PS7206-1A-E3 PS7206-1A-E3-A Embossed T ape 900 pcs/reel (UL, BSI approved) PS7206-1A-E4 PS7206-1A-E4-A PS7206-1A-F3 PS7206-1A-F3-A Embossed Tape 3 500 pcs/reel PS7206-1A-F4 PS7206-1A-F4-A *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current (DC) I F 50 mA Reverse Voltage V R 5.0 V Power Dissipation P D 50 mW Peak Forward Current I FP 1 A MOS FET Break Down Voltage V L 60 V Continuous Load Current I L 600 mA Pulse Load Current (AC/DC Connection) ILP 1.2 A Power Dissipation P D 300 mW Isolation Voltage BV 1 500 Vr.m.s. Total Power Dissipation P T 350 mW Operating Ambient Temperature T A −40 to +85 °C Storage Temperature T stg −40 to +100 °C *1 PW = 100 μs, Duty Cycle = 1% *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at T A = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together.
Data Sheet PN10297EJ03V0DS 4 PS7206-1A RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current I F 2 10 20 mA LED Off Voltage V F 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F I F = 10 mA 1.2 1.4 V Reverse Current I R V R = 5 V 5.0 μA MOS FET Off-state Leakage Current I Loff V D = 60 V 1.0 μA Output Capacitance C out V D = 0 V, f = 1 MHz 70 pF Coupled LED On-state Current I Fon I L = 600 mA 2.0 mA On-state Resistance R on1 I F = 10 mA, IL = 100 mA 0.6 0.8 Ω R on2 I F = 10 mA, IL = 600 mA, t ≤ 10 ms 0.6 0.8 Turn-on Time *1, 2 t on I F = 10 mA, VO = 5 V, RL = 500 Ω, 0.4 2.0 ms Turn-off Time *1, 2 t off PW ≥ 10 ms 0.08 0.5 Isolation Resistance R I-O V I-O = 1.0 kVDC 10 Ω Isolation Capacitance C I-O V = 0 V, f = 1 MHz 0.5 pF *1 Test Circuit for Switching Time VL RL IF Rin Pulse Input Input monitor monitor VO ton toff 10 % 90 % VO = 5 V 50 % Output Input *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. <R>
Data Sheet PN10297EJ03V0DS 5 PS7206-1A TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) 100857550250–25 100 Maximum Forward Current IF (mA) Ambient Temperature TA (°C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. Output Capacitance Cout (pF) Applied Voltage VD (V) Maximum Load Current IL (mA) Ambient Temperature TA (°C) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE APPLIED VOLTAGE IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1000–25 25 50 75 1.0 1.4 1.6 1.8 1.2 0.8 Forward Voltage VF (V)Off-state Leakage Current ILoff (A) Ambient Temperature TA (°C) Ambient Temperature TA (°C) AMBIENT TEMPERATURE FORWARD VOLTAGE vs. 10085750–25 50 25 600 900 300 f = 1 MHz 20 40 60 80 100 120 200 150 100 LOAD CURRENT vs. LOAD VOLTAGE Load Current IL (mA) Load Voltage VL (V) –0.8 –0.4 0.80.4 –300 –900 –600 300 900 600 IF = 10 mA, IL = 600 mA 10–6 10–11 10–8 10–7 10–9 10–10 02 0 4 0 6 0 8 0 VD = 60 V OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE Remark The graphs indicate nominal characteristics.
Data Sheet PN10297EJ03V0DS 6 PS7206-1A Normalized to 1.0 at TA = 25°C, IF = 10 mA, IL = 600 mA 0.5 1.5 2.0 3.0 1.0 2.5 0.0 100755025–25 0 Normalized On-state Resistance Ron Ambient Temperature TA (°C) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE n = 50 pcs, IF = 10 mA, IL = 600 mA t 10 ms ON-STATE RESISTANCE DISTRIBUTION Number (pcs) On-state Resistance Ron (Ω) n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 0.08 0.120 Number (pcs) Turn-off Time toff (ms) TURN-OFF TIME DISTRIBUTION Number (pcs) Turn-on Time ton (ms) TURN-ON TIME DISTRIBUTION Turn-on Time ton (ms) Forward Current IF (mA) TURN-ON TIME vs. FORWARD CURRENT 30252015105 0.05 0.15 0.20 0.30 0.10 0.25 Turn-off Time toff (ms) Forward Current IF (mA) TURN-OFF TIME vs. FORWARD CURRENT 0.4 0.6 0.8 30252015105 0.5 1.5 2.0 3.0 1.0 2.5 VO = 5 V, RL = 500 Ω VO = 5 V, RL = 500 Ω 0.4 0.6 Remark The graphs indicate nominal characteristics.
Data Sheet PN10297EJ03V0DS 7 PS7206-1A Normalized to 1.0 at TA = 25°C, IF = 10 mA, VO = 5 V RL = 500 Ω Normalized to 1.0 at TA = 25°C, IF = 10 mA, VO = 5 V, RL = 500 Ω 1000–25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized Turn-on Time ton Ambient Temperature TA (°C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 1000–25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized Turn-off Time toff Ambient Temperature TA (°C) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Remark The graphs indicate nominal characteristics.
Data Sheet PN10297EJ03V0DS 8 PS7206-1A TAPING SPECIFICATIONS (in millimeters) PS7206-1A-E3 PS7206-1A-E4 Tape Direction Outline and Dimensions (Tape) 1.55±0.1 2.0±0.05 4.0±0.1 1.75±0.1 4.6±0.1 2.9 MAX. 0.38.0±0.1 2.4±0.1 1.5+0.1 7.4±0.1 5.5±0.05 12.0±0.2 Outline and Dimensions (Reel) Packing: 900 pcs/reel 2.0±0.5 R 1.0 13.0±0.2φ 21.0±0.8φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 180+0 φ –1.5 +1–060φ
Data Sheet PN10297EJ03V0DS 9 PS7206-1A PS7206-1A-F3 PS7206-1A-F4 Tape Direction Outline and Dimensions (Tape) 1.55±0.1 2.0±0.05 4.0±0.1 1.75±0.1 4.6±0.1 2.9 MAX. 0.38.0±0.1 2.4±0.1 1.5+0.1 7.4±0.1 5.5±0.05 12.0±0.2 Outline and Dimensions (Reel) Packing: 3 500 pcs/reel 2.0±0.5 R 1.0 13.0±0.2φ 21.0±0.8φ 330±2.0φ 100±1.0φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 13.0±0.2φ
Data Sheet PN10297EJ03V0DS 10 PS7206-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering Peak reflow temperature 260 °C or below (package surface temperature) Time of peak reflow temperature 10 seconds or less Time of temperature higher than 220°C 60 seconds or less Time to preheat temperature from 120 to 180°C 120 ±30 s Number of reflows Three Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 220°C Package Surface Temperature T (°C) Time (s) (heating) to 10 s to 60 s 260°C MAX. Recommended Temperature Profile of Infrared Reflow 120±30 s (preheating) 180°C 120°C (2) Wave soldering Temperature 260 °C or below (molten solder temperature) Time 10 seconds or less Preheating conditions 120 °C or below (package surface temperature) Number of times One Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron Peak temperature (lead part temperature) 350 °C or below Time (each pins) 3 seconds or less Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. (4) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Data Sheet PN10297EJ03V0DS 11 PS7206-1A USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high te mperature and high humidity.
Data Sheet PN10297EJ03V0DS 12 PS7206-1A The information in this document is current as of February, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E 02. 11-1 (1) (2) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard": "Special": "Specific":
Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. Do not burn, destroy, cut, crush, or chemically dissolve the product. Do not lick the product or in any way allow it to enter the mouth.