PS7205B-1A-F3

PS7205B-1A NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

4 PIN SOP , 0.9 Ω, LOW ON-STATE RESISTANCE

80 V BREAK DOWN VOLTAGE,

500 mA CONTINUOUS LOAD CURRENT 1-CH OPTICAL COUPLED MOSFET PS7205B-1A

FEATURES

• LOW ON-STATE RESISTANCE: Ron = 0.9 Ω TYP
• LARGE CONTINUOUS LOAD CURRENT: IL = 500 mA
• HIGH-SPEED SWITCHING TIME: ton, toff = 0.5 ms MAX
• 1 CHANNEL TYPE 1 a output
• DESIGNED FOR AC/DC SWITCHING LINE CHANGER
• SMALL AND THIN PACKAGE: 4-pin SOP , Height = 2.1 mm
• HIGH ISOLATION VOLTAGE: BV = 1 500 Vr.m.s.
• LOW OFFSET VOLTAGE
• AVAILABLE IN TAPE AND REEL: PS7205B-1A-E3, E4, F3, F4

DESCRIPTION

The PS7205B-1A is a low on-state resistance solid state relay containing a GaAs LED on the input side and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance. California Eastern Laboratories

APPLICATIONS

• MEASUREMENT EQUIPMENT
• F A EQUIPMENT PART NUMBER PS7205B-1A SYMBOLS PARAMETERS UNITS MIN TYP MAX VF Forward Voltage I F = 5 mA V 1.1 1.4 IR Reverse Current V R = 5 V µA 5.0 ILoff Off-state Leakage Current V D = 80 V nA 0.15 5.0 Cout Output Capacitance V D = 0 V, f = 1 MHz pF 30 IFon LED On-state Current I L = 500 mA mA 2.0 Ron On-state Resistance I F = 5 mA, IL = 500 mA, t ≤ 10 ms Ω 0.9 1.2 ton Turn-on Time1, 2 IF = 5 mA, VO = 5 V, RL = 500 Ω,m s 0.18 0.5 toff Turn-off Time1, 2 PW ≥ 10 ms 0.04 0.5 RI-O Isolation Resistance V I-O = 1.0 kVDC Ω 109 CI-O Isolation Capacitance V = 0 V, f = 1 MHz pF 0.5 Notes: 1.Test Circuit for Switching Time: 2. The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width of under 10 ms, the turn-on time and turn-off time will increase. Output Input ton toff 10% 90% VO = 5 V 50% VL RL IF Rin Pulse Input Input monitor monitor VO Diode Coupled ELECTRICAL CHARACTERISTICS (TA = 25 °C) MOSFET

ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1%. 3. PW = 100 ms, 1 shot. 4. AC voltage for 1 minute at T A = 25°C, RH = 60% between input and output. PS7205B-1A OUTLINE DIMENSIONS (Units in mm) 1 2 TOP VIEW 4.4 7.0±0.3 0.5±0.3 0.15+0.10 -0.05 2.54 4.0±0.5 0.05+0.08 -0.05 2.05+0.08 -0.05 0.40+0.10 -0.05 0.25 M 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET SYMBOLS PARAMETERS UNITS RATINGS Diode IF Forward Current (DC) mA 50 VR Reverse Voltage V 5.0 PD Power Dissipation mW 50 IFP Peak Forward Current2 A1 MOS FET VL Break Down Voltage V 80 IL Continuous Load Current mA 500 ILP Pulse Load Current A 1 (AC/DC Connection) PD Power Dissipation mW 300 Coupled BV Isolation Voltage 4 Vr.m.s. 1 500 PT Total Power Dissipation mW 350 TA Operating Ambient °C −40 to +85 Temperature Tstg Storage Temperature °C −40 to +100 PART NUMBER PACKAGE PACKING STYLE PS7205B-1A 4-pin SOP Magazine case 100 pcs PS7205B-1A-E3 Embossed Tape 900 pcs/reel PS7205B-1A-E4 PS7205B-1A-F3 Embossed Tape 3 500 pcs/reel PS7205B-1A-F4 205B 001 001 N Week Assembled Year Assembled (Last 1 Digit) Nothing Ink marking Laser marking No.1 pin Mark *1 Applicable type numbers are underlined below Rank Code Assembly Lot Type Number PS7205B-1A MARKING RECOMMENDED OPERATING CONDITIONS (TA = 25°°°°°C) SYMBOLS PARAMETER UNITS MIN TYP MAX IF LED Operating Current mA 2 5 20 VF LED Off Voltage V 0 0.5

ORDERING INFORMATION

Maximum Forward Current IF (mA) Ambient Temperature TA (°C) 2010 30 40 Output Capacitance Cout (pF) Applied Voltage VD (V) 100750-25 50 25 600 500 400 300 200 100 Maximum Load Current IL (mA) Ambient Temperature TA (°C) 1000-25 25 50 75 1.0 1.4 1.6 1.8 1.2 0.8 Forward Voltage VF (V) Ambient Temperature TA (°C) Load Current IL (mA) Load Voltage VL (V) -0.8 -0.4 0.80.4 -250 -750 -500 250 750 500 IF = 5 mA, IL = 500 mA 10-6 10-11 10-8 10-7 10-9 10-10 06 0 20 80 100 12040 Off-state Leakage Current ILoff (A) Ambient Temperature TA (°C) f = 1 MHz VD = 80 V IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA TYPICAL PERFORMANCE CURVES (TA = 25 °C, unless otherwise specified) PS7205B-1A MAXIMUM FORWARD CURRENT vs AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE LOAD CURRENT vs. LOAD VOLTAGE

0.5 1.5 2.0 3.0 1.0 2.5 0.0 100755025-25 0 Normalized On-state Resistance Ron Ambient Temperature TA (°C) n = 50 pcs, IF = 5 mA, IL = 500 mA, t 10 ms Number (pcs) On-state Resistance Ron (Ω) 201051 5 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 201051 5 0.10 0.09 0.08 0.07 0.06 0.05 0.04 0.03 0.01 0.02 Turn-on Time ton (ms) Forward Current IF (mA) Turn-off Time toff (ms) Forward Current IF (mA) VO = 5 V, RL = 500 Ω Number (pcs) Turn-off Time toff (ms) n = 50 pcs, IF = 5 mA, VO = 5 V, RL = 500 Ω Number (pcs) Turn-on Time ton (ms) n = 50 pcs, IF = 5 mA, VO = 5 V, RL = 500 Ω VO = 5 V, RL = 500 Ω Normalized to 1.0 at TA = 25°C, IF = 5 mA, IL = 500 mA TYPICAL PERFORMANCE CURVES (TA = 25 °C, unless otherwise specified) PS7205B-1A TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION

TYPICAL PERFORMANCE CURVES (TA = 25 °C, unless otherwise specified) PS7205B-1A 1000-25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized Turn-on Time ton Ambient Temperature TA (°C) 1000-25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized Turn-off Time toff Ambient Temperature TA (°C) Normalized to 1.0 at TA = 25°C, IF = 5 mA, VO = 5 V RL = 500 Ω Normalized to 1.0 at TA = 25°C, IF = 5 mA, VO = 5 V RL = 500 Ω NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE

PS7205B-1A-E3 PS7205B-1A-E4 180 13.0±0.5 21.0±0.8 13.0±1.0 2.0±0.5 13.0±0.5 15° 15° 2.0 Tape Outline and Dimensions Tape Direction Reel Outline and Dimensions Packing: 900 pcs/reel 1.55±0.1 2.0±0.05 4.0±0.1 1.75±0.1 4.6±0.1 2.9 MAX. 7.4±0.1 0.38.0±0.1 1.5+0.1 -0 φ 5.5±0.05 12.0±0.2 2.4±0.1 TAPING SPECIFICATIONS (Units in mm)

PS7205B-1A-F3 PS7205B-1A-F4 12.4+2.0 -0.0 1.5 80±5.0φ 13.0±0.5φ 330φ1.5±0.5 2.0±0.5 6.0±1 120° 60° 21.0±0.8φ Tape Outline and Dimensions Tape Direction Reel Outline and Dimensions Packing: 3 500 pcs/reel 1.55±0.1 2.0±0.05 4.0±0.1 1.75±0.1 4.6±0.1 2.9 MAX. 7.4±0.1 0.38.0±0.1 1.5+0.1 -0 φ 5.5±0.05 12.0±0.2 2.4±0.1 TAPING SPECIFICATIONS (Units in mm) PS7205B-1A

220°C Package Surface Temperature T (°C) Time (s) (heating) to 10 s to 60 s 260°C MAX. Recommended Temperature Profile of Infrared Reflow 120±30 s (preheating) 180°C 120°C PS7205B-1A EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 Internet: http://WWW.CEL.COM 03/04/2002 DATA SUBJECT TO CHANGE WITHOUT NOTICE RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

• Peak reflow temperature 260 °C or below (package surface temperature)
• T ime of peak reflow temperature 10 seconds or less
• T ime of temperature higher than 220 °C 60 seconds or less
• T ime to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (2) Wave soldering
• T emperature 260 °C or below (molten solder temperature)
• T ime 10 seconds or less
• Preheating conditions 120 °C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions
• Fluxes Avoid removing the residual flux with freon-based cleaning solvent.