PS7200J-1A RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 14
Technical content
To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.
- All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipmen t; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. © 1998, 1999 Document No. P13561EJ7V0DS00 (7th edition) Date Published October 1999 NS CP(K) Printed in Japan Solid State Relay OCMOS FET PS7200J-1A 4-PIN SOP 1.7 pF LOW OUTPUT CAPACITANCE 1-ch Optical Coupled MOS FET The mark shows major revised points.
DESCRIPTION
The PS7200J-1A is a low output capacitance solid state relay containing a GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. It is suitable for high-frequency signal control, due to its low C × R, low output capacitance, and low off-state leakage current.
FEATURES
- Low C × R (C × R = 15 pF • Ω )
- Low output capacitance (Cout = 1.7 pF TYP.)
- Low off-state leakage current (ILoff = 0.02 nA TYP.)
- High-speed turn-on time (ton = 20 µs TYP.)
- 1 channel type (1 a output)
- Low LED operating current (IF = 2 mA)
- Designed for AC/DC switching line changer
- Small and thin package (4-pin SOP, Height = 2.1 mm)
- Low offset voltage
- Ordering number of taping product: PS7200J-1A-E3, E4, F3, F4
- UL approved: File No. E72422 (S)
- BSI approved: No. 8241/8242
- CSA approved: CA 101391
APPLICATIONS
- Measurement equipment Discontinued Product
Data Sheet P13561EJ7V0DS002 PS7200J-1A 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET TOP VIEW PACKAGE DIMENSIONS in millimeters 4.4 7.0±0.3 0.5±0.3 0.15+0.10 –0.05 2.54 4.0±0.5 0.05+0.08 –0.05 2.05+0.08 –0.05 0.40+0.10 –0.05 0.25 M Discontinued Product
Data Sheet P13561EJ7V0DS00 3 PS7200J-1A
ORDERING INFORMATION
Part Number Package Packing Style Application Part Number PS7200J-1A 4-pin SOP Magazine case 100 pcs PS7200J-1A PS7200J-1A-E3 Embossed Tape 900 pcs/reel PS7200J-1A-E4 PS7200J-1A-F3 Embossed Tape 3 500 pcs/reel PS7200J-1A-F4 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 °°°°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current (DC) I F 50 mA Reverse Voltage V R 5.0 V Power Dissipation P D 50 mW Peak Forward Current IFP 1A MOS FET Break Down Voltage V L 40 V Continuous Load Current IL 100 mA Pulse Load Current (AC/DC Connection) ILP 200 mA Power Dissipation P D 100 mW Isolation Voltage BV 1 500 Vr.m.s. Total Power Dissipation P T 150 mW Operating Ambient Temperature T A −40 to +80 °C Storage Temperature T stg −40 to +100 °C *1 PW = 100 µs, Duty Cycle = 1 % *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output RECOMMENDED OPERATING CONDITIONS (T A = 25 °°°°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current I F 21 0 2 0 m A LED Off Voltage V F 00 . 5 V Discontinued Product
Data Sheet P13561EJ7V0DS004 PS7200J-1A ELECTRICAL CHARACTERISTICS (T A = 25 °°°°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F IF = 10 mA 1.2 1.4 V Reverse Current I R VR = 5 V 5.0 µA MOS FET Off-state Leakage Current ILoff VD = 40 V 0.02 100 nA Output Capacitance C out VD = 0 V, f = 1 MHz 1.7 pF Coupled LED On-state Current I Fon IL = 100 mA 2.0 mA R on1 IF = 10 mA, IL = 10 mA 8.5 15On-state Resistance R on2 IF = 10 mA, IL = 100 mA, t ≤ 10 ms Ω Turn-on Time ton IF = 10 mA, VO = 5 V, PW ≥ 10 ms 0.02 1.0 ms Turn-off Time toff 0.3 1.0 Isolation Resistance R I-O VI-O = 1.0 kVDC 10 Ω Isolation Capacitance C I-O V = 0 V, f = 1 MHz 0.5 pF *1 Test Circuit for Switching Time R L IF R in Pulse Input Input monitor monitor VO VL ton toff 10 % 90 % Input Output VO = 5 V 50 % Discontinued Product
Data Sheet P13561EJ7V0DS00 5 PS7200J-1A TYPICAL CHARACTERISTICS (T A = 25 °°°°C, unless otherwise specified) –25 0 25 50 7580 100 100 Ambient Temperature TA (˚C) Maximum Forward Current IF (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 1 mA 5 mA 20 mA 30 mA IF = 50 mA 10 mA –25 0 25 50 75 100 1.6 1.4 1.2 1.0 0.8 Ambient Temperature TA (˚C) Forward Voltage VF (V) AMBIENT TEMPERATURE FORWARD VOLTAGE vs. f = 1 MHz 5 10 15 20 30 25 5.0 4.0 3.0 2.0 1.0 Applied Voltage VD (V) Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE Ambient Temperature TA (˚C) Maximum Load Current IL (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 150 100 –25 0 25 50 75 10080 IF = 10 mA 100 –50 –100 LOAD CURRENT vs. LOAD VOLTAGE Load Voltage VL (V) Load Current IL (mA) 25 ˚C TA = 80 ˚C 01 0 20 30 40 50 10–6 10–7 10–8 10–9 10–10 10–11 10–12 Applied Voltage VD (V) Off-state Leakage Current ILoff (A) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE Discontinued Product
Data Sheet P13561EJ7V0DS006 PS7200J-1A TURN-OFF TIME vs. FORWARD CURRENT Forward Current IF (mA) Turn-off Time toff (ms) Turn-off Time toff (ms) Number (pcs) TURN-OFF TIME DISTRIBUTION TURN-ON TIME vs. FORWARD CURRENT Forward Current IF (mA) Turn-on Time ton (ms) Turn-on Time ton (ms) Number (pcs) TURN-ON TIME DISTRIBUTION n = 50 pcs, IF = 10 mA, VO = 5 V n = 50 pcs, I F = 10 mA, VO = 5 V Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, IL = 10 mA –25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Ambient Temperature TA (˚C) Normalized On-state Resistance Ron NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE n = 50 pcs, IF = 10 mA, IL = 10 mA ON-STATE RESISTANCE DISTRIBUTION Number (pcs) On-state Resistance Ron (Ω ) VO = 5 V 5 15 20 2510 30 0.10 0.08 0.06 0.04 0.02 0 5 15 20 30 2510 0.5 0.4 0.3 0.2 0.1 VO = 5 V Discontinued Product
Data Sheet P13561EJ7V0DS00 7 PS7200J-1A –25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Ambient Temperature TA (˚C) Normalized Turn-on Time ton NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V Normalized to 1.0 at T A = 25 ˚C, IF = 10 mA, VO = 5 V –25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Ambient Temperature TA (˚C) Normalized Turn-off Time toff NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Remark The graphs indicate nominal characteristics. Discontinued Product
Data Sheet P13561EJ7V0DS008 PS7200J-1A TAPING SPECIFICATIONS (in millimeters) 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.15.5±0.1 12.0±0.2 4.6±0.1 2.4±0.1 7.4±0.1 0.3 8.0±0.1 PS7200J-1A-E3 PS7200J-1A-E4 180 13.0±0.5 21.0±0.8 13.0±1.0 2.0±0.5 13.0±0.5 15˚ 15˚ 2.0 Outline and Dimensions (Tape) Tape Direction Outline and Dimensions (Reel) Packing: 900 pcs/reel Discontinued Product
Data Sheet P13561EJ7V0DS00 9 PS7200J-1A 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.15.5±0.1 12.0±0.2 4.6±0.1 2.4±0.1 7.4±0.1 0.3 8.0±0.1 PS7200J-1A-F3 PS7200J-1A-F4 12.4+2.0 –0.0 1.5 80±5.0φ 13.0±0.5φ 330φ1.5±0.5 2.0±0.5 6.0±1 120˚ 60 ˚ 21.0±0.8φ Outline and Dimensions (Tape) Tape Direction Outline and Dimensions (Reel) Packing: 3 500 pcs/reel Discontinued Product
Data Sheet P13561EJ7V0DS0010 PS7200J-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering
- Peak reflow temperature 235 °C (package surface temperature)
- Time of temperature higher than 210 °C 30 seconds or less
- Number of reflows Two
- Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) 60 to 120 s (preheating) 210 ˚C 100 to 160 ˚C Package Surface Temperature T (˚C) Time (s) (heating) to 10 s to 30 s 235 ˚C (peak temperature) Recommended Temperature Profile of Infrared Reflow (2) Dip soldering
- Temperature 260 °C or below (molten solder temperature)
- Time 10 seconds or less
- Number of times One
- Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Caution
- F l u x e s Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Discontinued Product
Data Sheet P13561EJ7V0DS00 11 PS7200J-1A [MEMO] Discontinued Product
Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal.• The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
- No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.
- NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
- Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information.
- While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features.
- NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8 Discontinued Product