PS7206-1A NEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. © 1999, 2000 4-PIN SOP, 0.6 ΩΩΩΩ LOW ON-STATE RESISTANCE 600 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET Document No. P14496EJ5V0DS00 (5th edition) Date Published June 2000 NS CP(K) Printed in Japan Solid State Relay OCMOS FET PS7206-1A The mark  shows major revised points.

DESCRIPTION

The PS7206-1A is a low on-state resistance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance.

FEATURES

  • Low on-state resistance (Ron = 0.6 Ω TYP.)
  • Large continuous load current (IL = 600 mA)
  • 1 channel type (1 a output)
  • Designed for AC/DC switching line changer
  • Small and thin package (4-pin SOP, Height = 2.1 mm)
  • High isolation voltage (BV = 1 500 Vr.m.s.)
  • Low offset voltage
  • Ordering number of taping product: PS7206-1A-E3, E4, F3, F4

APPLICATIONS

  • Measurement equipment
  • FA equipment

Data Sheet P14496EJ5V0DS002 PS7206-1A 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET TOP VIEW PACKAGE DIMENSIONS in millimeters 4.4 7.0±0.3 0.5±0.3 0.15+0.10 –0.05 2.54 4.0±0.5 0.05+0.08 –0.05 2.05+0.08 –0.05 0.40+0.10 –0.05 0.25 M

Data Sheet P14496EJ5V0DS00 3 PS7206-1A

ORDERING INFORMATION

Part Number Package Packing Style Application Part Number PS7200B-1A 4-pin SOP Magazine case 100 pcs PS7200B-1A PS7200B-1A-E3 Embossed Tape 900 pcs/reel PS7200B-1A-E4 PS7200B-1A-F3 Embossed Tape 3 500 pcs/reel PS7200B-1A-F4 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (T A = 25 °°°°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current (DC) I F 50 mA Reverse Voltage V R 5.0 V Power Dissipation P D 50 mW Peak Forward Current IFP 1A MOS FET Break Down Voltage V L 60 V Continuous Load Current IL 600 mA Pulse Load Current (AC/DC Connection) ILP 1.2 A Power Dissipation P D 300 mW Isolation Voltage BV 1 500 Vr.m.s. Total Power Dissipation P T 350 mW Operating Ambient Temperature T A −40 to +85 °C Storage Temperature T stg −40 to +100 °C *1 PW = 100 µs, Duty Cycle = 1 % *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output

Data Sheet P14496EJ5V0DS004 PS7206-1A RECOMMENDED OPERATING CONDITIONS (T A = 25 °°°°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current I F 21 0 2 0 m A LED Off Voltage V F 00 . 5 V ELECTRICAL CHARACTERISTICS (T A = 25 °°°°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F IF = 10 mA 1.2 1.4 V Reverse Current I R VR = 5 V 5.0 µA MOS FET Off-state Leakage Current ILoff VD = 60 V 1.0 µA Output Capacitance C out VD = 0 V, f = 1 MHz 70 pF Coupled LED On-state Current I Fon IL = 600 mA 2.0 mA On-state Resistance R on IF = 10 mA, IL = 600 mA, t ≤ 10 ms 0.6 0.8 Ω Turn-on Time t on IF = 10 mA, VO = 5 V, RL = 500 Ω ,0 . 4 2 . 0 m s Turn-off Time t off PW ≥ 10 ms 0.08 0.5 Isolation Resistance R I-O VI-O = 1.0 kVDC 10 Ω Isolation Capacitance C I-O V = 0 V, f = 1 MHz 0.5 pF *1 Test Circuit for Switching Time VL R L IF R in Pulse Input Input monitor monitor VO ton toff 10 % 90 % VO = 5 V 50 % Output Input

Data Sheet P14496EJ5V0DS00 5 PS7206-1A TYPICAL CHARACTERISTICS (T A = 25 °°°°C, unless otherwise specified) 100857550250–25 100 Maximum Forward Current IF (mA) Ambient Temperature TA (˚C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. Output Capacitance Cout (pF) Applied Voltage VD (V) Maximum Load Current IL (mA) Ambient Temperature TA (˚C) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE APPLIED VOLTAGE IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1000–25 25 50 75 1.0 1.4 1.6 1.8 1.2 0.8 Forward Voltage VF (V)Off-state Leakage Current ILoff (A) Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) AMBIENT TEMPERATURE FORWARD VOLTAGE vs. 10085750–25 50 25 600 900 300 f = 1 MHz 20 40 60 80 100 120 200 150 100 LOAD CURRENT vs. LOAD VOLTAGE Load Current IL (mA) Load Voltage VL (V) –0.8 –0.4 0.80.4 –300 –900 –600 300 900 600 IF = 10 mA, IL = 600 mA 10–6 10–11 10–8 10–7 10–9 10–10 02 0 4 0 6 0 8 0 VD = 60 V OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE

Data Sheet P14496EJ5V0DS006 PS7206-1A Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, IL = 600 mA 0.5 1.5 2.0 3.0 1.0 2.5 0.0 100755025–25 0 Normalized On-state Resistance Ron Ambient Temperature TA (˚C) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE n = 50 pcs, I F = 10 mA, IL = 600 mA t 10 ms ON-STATE RESISTANCE DISTRIBUTION Number (pcs) On-state Resistance Ron (Ω ) n = 50 pcs, IF = 10 mA, VO = 5 V, R L = 500 Ω n = 50 pcs, IF = 10 mA, VO = 5 V, R L = 500 Ω 0.08 0.120 Number (pcs) Turn-off Time toff (ms) TURN-OFF TIME DISTRIBUTION Number (pcs) Turn-on Time ton (ms) TURN-ON TIME DISTRIBUTION Turn-on Time ton (ms) Forward Current IF (mA) TURN-ON TIME vs. FORWARD CURRENT 30252015105 0.05 0.15 0.20 0.30 0.10 0.25 Turn-off Time toff (ms) Forward Current IF (mA) TURN-OFF TIME vs. FORWARD CURRENT 0.4 0.6 0.8 30252015105 0.5 1.5 2.0 3.0 1.0 2.5 VO = 5 V, R L = 500 Ω VO = 5 V, R L = 500 Ω 0.4 0.6

Data Sheet P14496EJ5V0DS00 7 PS7206-1A Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V R L = 500 Ω Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V, R L = 500 Ω 1000–25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized Turn-on Time ton Ambient Temperature TA (˚C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 1000–25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized Turn-off Time toff Ambient Temperature TA (˚C) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Remark The graphs indicate nominal characteristics.

Data Sheet P14496EJ5V0DS008 PS7206-1A TAPING SPECIFICATIONS (in millimeters) 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.15.5±0.1 12.0±0.2 4.6±0.1 2.4±0.1 7.4±0.1 0.3 8.0±0.1 PS7206-1A-E3 PS7206-1A-E4 180 13.0±0.5 21.0±0.8 13.0±1.0 2.0±0.5 13.0±0.5 15˚ 15˚ 2.0 Outline and Dimensions (Tape) Tape Direction Outline and Dimensions (Reel) Packing: 900 pcs/reel

Data Sheet P14496EJ5V0DS00 9 PS7206-1A 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.15.5±0.1 12.0±0.2 4.6±0.1 2.4±0.1 7.4±0.1 0.3 8.0±0.1 PS7206-1A-F3 PS7206-1A-F4 12.4+2.0 –0.0 1.5 80±5.0φ 13.0±0.5φ 330φ1.5±0.5 2.0±0.5 6.0±1 120˚ 60 ˚ 21.0±0.8φ Outline and Dimensions (Tape) Tape Direction Outline and Dimensions (Reel) Packing: 3 500 pcs/reel

Data Sheet P14496EJ5V0DS0010 PS7206-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

  • Peak reflow temperature 235 °C or below (package surface temperature)
  • Time of temperature higher than 210 °C 30 seconds or less
  • Number of reflows Two
  • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) 60 to 120 s (preheating) 210 ˚C 100 to 160 ˚C Package Surface Temperature T (˚C) Time (s) (heating) to 10 s to 30 s 235 ˚C (peak temperature) Recommended Temperature Profile of Infrared Reflow (2) Dip soldering
  • Temperature 260 °C or below (molten solder temperature)
  • Time 10 seconds or less
  • Number of times One
  • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions
  • F l u x e s Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

Data Sheet P14496EJ5V0DS00 11 PS7206-1A [MEMO]

Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. M8E 00. 4 The information in this document is current as of June, 2000. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard":Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).