PS7200A-1A

PS7200A-1A NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. © 1997, 1999 Solid State Relay OCMOS FET PS7200A-1A 4-PIN SOP 3.0 pF LOW OUTPUT CAPACITANCE 1-ch Optical Coupled MOS FET Document No. P12636EJ4V0DS00 (4th edition) Date Published October 1999 NS CP(K) Printed in Japan The mark  shows major revised points.

DESCRIPTION

The PS7200A-1A is a low output capacitance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. It is suitable for high-frequency signal control, due to its low C × R, low output capacitance, and low off-state leakage current.

FEATURES

• Low C × R (C × R = 30 pF • Ω )
• Low output capacitance (Cout = 3.0 pF TYP.)
• Low off-state leakage current (ILoff = 0.1 nA TYP.)
• High-speed turn-on time (ton = 0.01 ms TYP.)
• 1 channel type (1 a output)
• Low LED operating current (I F = 2 mA)
• Designed for AC/DC switching line changer
• Small and thin package (4-pin SOP, Height = 2.1 mm)
• Low offset voltage
• Ordering number of taping product: PS7200A-1A-E3, E4, F3, F4
• UL approved: File No. E72422 (S)
• BSI approved: No. 8241/8242
• CSA approved: No. CA 101391

APPLICATIONS

• Measurement equipment

Data Sheet P12636EJ4V0DS002 PS7200A-1A 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET TOP VIEW PACKAGE DIMENSIONS in millimeters 4.4 7.0±0.3 0.5±0.3 0.15+0.10 –0.05 2.54 4.0±0.5 0.05+0.08 –0.05 2.05+0.08 –0.05 0.40+0.10 –0.05 0.25 M

Data Sheet P12636EJ4V0DS00 3 PS7200A-1A

ORDERING INFORMATION

Part Number Package Packing Style Application Part Number PS7200A-1A 4-pin SOP Magazine case 100 pcs PS7200A-1A PS7200A-1A-E3 Embossed Tape 900 pcs/reel PS7200A-1A-E4 PS7200A-1A-F3 Embossed Tape 3 500 pcs/reel PS7200A-1A-F4 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (T A = 25 °°°°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current (DC) I F 50 mA Reverse Voltage V R 5.0 V Power Dissipation P D 50 mW Peak Forward Current IFP 1A MOS FET Break Down Voltage V L 40 V Continuous Load Current IL 100 mA Pulse Load Current (AC/DC Connection) ILP 200 mA Power Dissipation P D 100 mW Isolation Voltage BV 1 500 Vr.m.s. Total Power Dissipation P T 150 mW Operating Ambient Temperature T A −40 to +80 °C Storage Temperature T stg −40 to +100 °C *1 PW = 100 µs, Duty Cycle = 1 % *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output

Data Sheet P12636EJ4V0DS004 PS7200A-1A RECOMMENDED OPERATING CONDITIONS (T A = 25 °°°°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current I F 21 0 2 0 m A LED Off Voltage V F 00 . 5 V ELECTRICAL CHARACTERISTICS (T A = 25 °°°°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F IF = 10 mA 1.2 1.4 V Reverse Current I R VR = 5 V 5.0 µA MOS FET Off-state Leakage Current ILoff VD = 40 V 0.1 100 nA Output Capacitance C out VD = 0 V, f = 1 MHz 3.0 pF Coupled LED On-state Current I Fon IL = 100 mA 2.0 mA On-state Resistance R on1 IF = 10 mA, IL = 10 mA 9.3 12 Ω R on2 IF = 10 mA, IL = 100 mA, t ≤ 10 ms Turn-on Time ton IF = 10 mA, VO = 5 V, PW ≥ 10 ms 0.01 0.5 ms Turn-off Time toff 0.07 0.2 Isolation Resistance R I-O VI-O = 1.0 kVDC 10 Ω Isolation Capacitance C I-O V = 0 V, f = 1 MHz 0.5 pF *1 Test Circuit for Switching Time VL R L IF R in Pulse Input Input monitor monitor VO ton toff 10 % 90 % Input Output VO = 5 V 50 %

Data Sheet P12636EJ4V0DS00 5 PS7200A-1A TYPICAL CHARACTERISTICS (T A = 25 °°°°C, unless otherwise specified) –25 0 25 50 7580 100 100 Ambient Temperature TA (˚C) Maximum Forward Current IF (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 1 mA 5 mA 20 mA 30 mA IF = 50 mA 10 mA –25 0 25 50 75 100 1.6 1.4 1.2 1.0 0.8 Ambient Temperature TA (˚C) Forward Voltage VF (V) AMBIENT TEMPERATURE FORWARD VOLTAGE vs. f = 1 MHz 5 10 15 20 30 25 5.0 4.0 3.0 2.0 1.0 Applied Voltage VD (V) Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE Ambient Temperature TA (˚C) Maximum Load Current IL (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 150 100 –25 0 25 50 75 10080 IF = 10 mA 100 –50 –100 LOAD CURRENT vs. LOAD VOLTAGE Load Voltage VL (V) Load Current IL (mA) Applied Voltage VD (V) Off-state Leakage Current ILoff (A) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 25 ˚C TA = 80 ˚C 01 0 20 30 40 50 10–6 10–7 10–8 10–9 10–10 10–11 10–12

Data Sheet P12636EJ4V0DS006 PS7200A-1A 5 15 20 30 2510 0.5 0.4 0.3 0.2 0.1 TURN-OFF TIME vs. FORWARD CURRENT Forward Current IF (mA) Turn-off Time toff (ms) VO = 5 V 0.06 0.08 Turn-off Time toff (ms) Number (pcs) TURN-OFF TIME DISTRIBUTION n = 50 pcs, IF = 10 mA, VO = 5 V VO = 5 V 5 15 20 2510 30 0.05 0.04 0.03 0.02 0.01 TURN-ON TIME vs. FORWARD CURRENT Forward Current IF (mA) Turn-on Time ton (ms) Turn-on Time ton (ms) Number (pcs) TURN-ON TIME DISTRIBUTION n = 50 pcs, IF = 10 mA, VO = 5 V Normalized to 1.0 at T A = 25 ˚C, IF = 10 mA, IL = 10 mA –25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Ambient Temperature TA (˚C) Normalized On-state Resistance Ron NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE n = 50 pcs, IF = 10 mA, IL = 10 mA ON-STATE RESISTANCE DISTRIBUTION Number (pcs) On-state Resistance Ron (Ω )

Data Sheet P12636EJ4V0DS00 7 PS7200A-1A Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V –25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Ambient Temperature TA (˚C) Normalized Turn-on Time ton NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V –25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Ambient Temperature TA (˚C) Normalized Turn-off Time toff NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Remark The graphs indicate nominal characteristics.

Data Sheet P12636EJ4V0DS008 PS7200A-1A TAPING SPECIFICATIONS (in millimeters) 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.15.5±0.1 12.0±0.2 4.6±0.1 2.4±0.1 7.4±0.1 0.3 8.0±0.1 PS7200A-1A-E3 PS7200A-1A-E4 180 13.0±0.5 21.0±0.8 13.0±1.0 2.0±0.5 13.0±0.5 15˚ 15˚ 2.0 Outline and Dimensions (Tape) Tape Direction Outline and Dimensions (Reel) Packing: 900 pcs/reel

Data Sheet P12636EJ4V0DS00 9 PS7200A-1A 1.55±0.1 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.15.5±0.1 12.0±0.2 4.6±0.1 2.4±0.1 7.4±0.1 0.3 8.0±0.1 PS7200A-1A-F3 PS7200A-1A-F4 12.4+2.0 –0.0 1.5 80±5.0φ 13.0±0.5φ 330φ1.5±0.5 2.0±0.5 6.0±1 120˚ 60 ˚ 21.0±0.8φ Outline and Dimensions (Tape) Tape Direction Outline and Dimensions (Reel) Packing: 3 500 pcs/reel

Data Sheet P12636EJ4V0DS0010 PS7200A-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

• Peak reflow temperature 235 °C (package surface temperature)
• Time of temperature higher than 210 °C 30 seconds or less
• Number of reflows Two
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) 60 to 120 s (preheating) 210 ˚C 100 to 160 ˚C Package Surface Temperature T (˚C) Time (s) (heating) to 10 s to 30 s 235 ˚C (peak temperature) Recommended Temperature Profile of Infrared Reflow (2) Dip soldering
• Temperature 260 °C or below (molten solder temperature)
• Time 10 seconds or less
• Number of times One
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions
• F l u x e s Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

Data Sheet P12636EJ4V0DS00 11 PS7200A-1A [MEMO]

Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal.• The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.

• No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.
• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
• Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information.
• While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features.
• NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8