DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: 714 447 2345 Website: www.bitechnologies.com March 19, 2012 page 1 of 6 BI technologies Slide Potentiometer Molded Element 100,000 Cycle Life Metal or Plastic Shaft Options With/Without LED Illumination With/Without Dust Cover RoHS Compliant MODEL STYLE Dual Gang Without LED PSxxM Single Gang With LED PSxxL ELECTRICAL1 Resistance Range, Ohms 500 -1M Standard Resistance Tolerance 20% Resistance Tapers A,B,C Residual Resistance Terminals 1 to 2:Less than 10 ohms Terminals 2 to 3:Less than 30 ohms Input Voltage, Maximum Linear B taper: 200 Vac Other tapers: 150 Vac Power rating, Watts (Single Unit / Dual Unit) Linear B taper: 20mm: 0.1W / 0.05W, 30mm: 0.2W / 0.1W 45mm: 0.25W / 0.125W, 60mm:0.2W / 0.2W Other tapers: 20mm: 0.05W / 0.025W, 30mm: 0.1W / 0.05W 45mm: 0.125W / 0.06W, 60mm:0.1W / 0.1W Dielectric Strength 300Vac, 1 minute Insulation Resistance, Minimum 10M ohms at 250Vdc/ 1 minute Sliding Noise Less than 100mV Gang Error ±3dB (-40dB to 0dB) MECHANICAL Static Stop Strength, Minimum 5.0 Kgf/cm Operating Force 10gf to 100gf Detent Slip-out force 30gf to 200gf DURABILITY Sliding Life 100,000 cycles Specifications subject to change without notice.
BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com March 19, 2012 page 2 of 6 BI technologies ORDERING INFORMATION2 Model PSxxM (Without LED) Model PSxxL (With LED) Contact our customer service for custom designs and features. STANDARD RESISTANCE VALUES, OHMS 500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1 MEG PS30M – 0 P C 1 F B R100K N Model Style Total Resistance Detent 0 = Without 1 = Center Lever Material: P = Plastic M = Metal Lever Type: See Below Tapers: See Below A = Audio B = Linear (3B taper for Dual Gang) C = Reverse Audio L = Linear (Dual Gang Only) Frame Option: Blank = Without F = With Lever Length: See “L” Code Below Travel in millimeters 20, 30, 45, 60 PS45L – R 0 1 F B R100K N Model Style Total Resistance Detent 0 = Without 1 = Center Tapers: See Below A = Audio B = Linear (See “L” Taper graph) C = Reverse Audio Frame Option: Blank = Without F = With Lever Length: 1 = 15mm 2 = 19mm LED Color: R = Red G = Orange Y = Yellow N = Green Travel in millimeters 20, 30, 45, 60 Dust Cover * Blank = with Dust Cover N = without Dust Cover Dust Cover * Blank = with Dust Cover N = without Dust Cover
BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com March 19, 2012 page 3 of 6 BI technologies Tapers For Dual Gang units ONLY, the Standard Taper is a 3B taper If Linear Taper is desired, use “L” taper option
BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com March 19, 2012 page 4 of 6 BI technologies Plastic Lever Types (For PSxxM Only) Dust Cover option not offered for levers less than 10 mm in length Metal Lever Types (For PSxxM Only) * Dust Cover option not offered for levers less than 10 mm in length
BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com March 19, 2012 page 5 of 6 BI technologies Model PSxxM (Without LED) With Dust Cover Without Dust Cover For PSxxM and PSxxL MODEL A B C D F G PS20M PS20L 35 31 20 30 5 12.5 PS30M PS30L 45 41 30 40 10 22.5 PS45M PS45L 60 56 45 55 15 32.5 PS60M PS60L 75 71 60 70 22.5 47.5 OUTLINE DRAWING
BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com March 19, 2012 page 6 of 6 BI technologies Model PSxxL (With LED) With Dust Cover Without Dust Cover CIRCUIT DIAGRAM PSxxL (Single gang with LED) PSxxM (Dual gang)